Skyjacker Suspensions 3.5in Front/2in Rear Coil Spring Lift Kit

Skyjacker specifically engineered a progressive 2-stage dual rate long travel coil. The 1st Flex Rate stage delivers a comfortable ride with the ability to flex for increased articulation. The flex rate expands during full articulation as the suspension drops (full droop). This keeps the coil springs seated in the upper coil mount/bucket and the tires in contact with the terrain. The 2nd Ride Rate stage only engages after compression past the flex rate. Engineered to coordinate with the Gladiator’s distinctive suspension handling characteristics, the rear coils are side specific.

Longer replacement Front Lower Control Link Arms corrects caster angle. The inward offset bend improves tire clearance to maximize turning radius. Longer replacement Rear Upper Control Link Arms correct rear drive shaft pinion angle. Formed from 2-inch OD x 0.250 wall DOM tubing, both pairs of arms have pressed-in HD OEM style vulcanized rubber bushings at each end. A replacement Front Adjustable Track Bar includes pressed-in HD OEM style rubber bushing and an adjustable 3/4-inch Heavy-Duty Rod End, Jam Nut and Alignment Bushings. Front and Rear Bump Stop Spacers bolt onto the axle bump pads and keep the suspension travel safely in check. Extended Length Sway Bar End Links allow full articulation at full droop. The front end links include Skyjacker installed pressed-in HD OEM style rubber bushings. The rear end links come with press-in Poly bushings.

Specifications:

• Lift Height: 3.5in
• Max Tire Size: 37 x 12.50
• Wheel: 17-20 x 9
• Backspacing: 4.5

Notes:

• Will Not Fit Diesel Models.
• Will Not Fit Mojave Models.

Specifications

• Coil Spring Type: Dual Rate
• Control Arms Included: Yes
• Hardware Included: Yes
• Install Method: Bolt On
• Lift: 2.00in
• Lift Type: Spring and Shock
• Shocks Included: Yes
• Track Bar Included: Yes

Warranty: See description for part-specific warranty information.

Fitment: JT Rubicon