Jeep Wrangler JK Lift Kit Buying Guide
The 2007-2018 Jeep Wrangler JK is one of the most modified vehicles on the trail, and there are more lift options for it than for almost any other Jeep. This guide breaks the decision into tire size, lift height, kit type and the supporting parts a JK needs, using the specs the manufacturers publish for the kits we sell. To browse everything, see all Jeep Wrangler JK lift kits.
Step 1: Decide on your tire size first
Pick the tire, then pick a lift that clears it. Manufacturers publish tire guidance for each kit, and it depends on your fenders and wheel backspacing as much as the lift itself. A few examples from kits we carry:
- TeraFlex Sport ST1 1.5": TeraFlex lists a 33" max tire diameter.
- TeraFlex 2.5" coil spring base kit (4-door): TeraFlex says it includes the basic components to fit tires up to 35".
- Rock Krawler X-Factor and Adventure-X2: Rock Krawler typically recommends 4.5" of wheel backspacing for 33" and 35" tires and 3.5" of backspacing for 37" tires. For the Adventure-X2 long arm kit, it lists 33" or 35" tires with OEM fender flares and 37" tires with flat fenders.
TeraFlex kits call for aftermarket wheels with 4.75" of backspacing or less, or wheel offset adapters for stock wheels. Shop wheels and tires once you know your target size.
Step 2: Pick a lift height
- 1.5" to 2.5": a mild lift for daily driving and light trail use. Examples: the TeraFlex Sport ST lift kit (4-door, 1.5", 2.5" or 3"), the MetalCloak JK 2.5" True Dual Rate lift kit and the MetalCloak JK 2.5" Game-Changer kit.
- 3" to 3.5": a popular middle ground for 35" tires. Options include the TeraFlex coil spring base lift kit (4-door, 2.5", 3" or 4"), the Rock Krawler Drive Right mid arm kit (4-door, 2.5" or 3.5") and the Rock Krawler X-Factor kit (4-door, 2.5" or 3.5").
- 4" and up: aimed at 37" tires and more articulation, usually with long arms. See the MetalCloak JK 4.5" 4-Link long arm kit, the Rock Krawler Adventure-X2 long arm kit (4-door, 3.5" or 4.5") and the TeraFlex Alpine RT long arm kit (4-door, 4" or 6").
Rock Krawler bases its lift heights on a Rubicon with a front bumper and winch, rear bumper and full-size spare. It recommends dropping 1" of rear coil height for a spare delete, and going up 1" for an overland or heavily loaded rear.
Step 3: Understand the kit types
Spring and base kits
These add height with springs and basic corrections. The TeraFlex 2.5" coil spring base kit includes lift coils, bump stop extensions, rear sway bar links, 9550 VSS shocks, a rear track bar and axle brackets. TeraFlex lists its control arm kits and HD forged adjustable track bars as recommended but not included, and says caster correction is recommended but not required at that height. The TeraFlex Sport ST kits are bolt-on with no cutting or welding, and they do not include shocks.
Complete bolt-in short and mid arm systems
These correct geometry as well as adding height. The Rock Krawler Drive Right uses an adjustable front track bar, a bolt-on rear track bar relocation bracket and adjustable front lower control arms, so caster can be set without shortening the wheelbase. The Rock Krawler X-Factor is a complete bolt-in system that can move the rear axle back up to 1" over stock. MetalCloak's Game-Changer kits use Duroflex joints, True Dual Rate coils, Durotrak track bars and height-adjustable bump stops.
Long arm systems
Long arm kits relocate the frame-side control arm mounts. They cost more and take more work:
- MetalCloak 4.5" 4-Link: weld-on front upper control arm brackets and bolt-on rear long arm brackets. MetalCloak says the kit includes long arms, shocks, track bars, a steering stabilizer, brake lines and bump stops, and it requires aftermarket front and rear driveshafts plus an exhaust loop bypass pipe.
- Rock Krawler Adventure-X2: weld-on front and rear long arm brackets, a high-clearance 3-link rear that gains 3.5" of clearance under the rear axle, and minor exhaust rerouting on the driver's side.
- TeraFlex Alpine RT: requires cutting and welding of factory control arm brackets and driveshaft modifications such as high-angle Rzeppa CV driveshafts. It includes an exhaust spacer kit and does not include shocks.
Step 4: JK-specific checks
- 2-door or 4-door: many kits are sold separately for each, including the Rock Krawler, TeraFlex and MetalCloak kits above.
- 2012-2018 driveshaft and exhaust clearance: MetalCloak says all 2012+ JK Wranglers on its kits need either exhaust spacers or a driveshaft. TeraFlex says 2012-2018 JKs need exhaust spacers or other exhaust modification if the front extended shock length is over 24.5". Rock Krawler recommends, but does not require, a 2" OD aftermarket front driveshaft on 2012+ models with the X-Factor kit. Shop driveshafts and exhaust.
- Rubicon or not: Rock Krawler's lift heights are based on Rubicon models, so check the product page notes for other trims.
Step 5: Plan the supporting parts
- Track bars: see JK track bars.
- Control arms: adjustable arms set caster and pinion angle. Shop control arms.
- Steering: bigger tires load the front end. See JK tie rods and our death wobble guide.
- Bump stops: see bump stops and limit straps.
- Gearing: larger tires usually need a re-gear. Shop ring and pinion.
- Alignment: TeraFlex lists an alignment as required on its kits, and MetalCloak recommends having a suspension specialist align the Jeep after install.
Quick comparison
| Kit | Lift | Type | Fits |
|---|---|---|---|
| TeraFlex Sport ST | 1.5", 2.5" or 3" | Bolt-on spring system, no shocks | JK 4-door (2-door version: 2.5" or 3") |
| MetalCloak 2.5" True Dual Rate | 2.5" | Entry-level complete kit | 2007-2018 JK |
| TeraFlex coil spring base | 2.5", 3" or 4" | Base kit | JK 4-door (2-door version) |
| Rock Krawler Drive Right | 2.5" or 3.5" | Mid arm system | JK 4-door (2-door version) |
| Rock Krawler X-Factor | 2.5" or 3.5" | Complete bolt-in system | JK 4-door (2-door version) |
| MetalCloak 2.5" Game-Changer | 2.5" | Mid arm system | 2007-2018 JK |
| MetalCloak 4.5" 4-Link | 4.5" | Long arm | 2007-2018 JK |
| Rock Krawler Adventure-X2 | 3.5" or 4.5" | Long arm, weld-on | JK 4-door (2-door version) |
| TeraFlex Alpine RT | 4" or 6" | Long arm, cut and weld | JK 4-door (2-door version) |
FAQ
What lift do I need for 35" tires on a JK?
It depends on the kit, your fenders and your wheels. TeraFlex says its 2.5" coil spring base kit for the 4-door fits tires up to 35", and Rock Krawler lists 33" or 35" tires with OEM fender flares on its Adventure-X2 kit. Check the tire notes on each product page.
Do I need a new driveshaft?
Often, on 2012-2018 JKs. MetalCloak says 2012+ JKs need exhaust spacers or a driveshaft with its kits, and long arm kits such as the MetalCloak 4-Link and TeraFlex Alpine RT list driveshaft upgrades as required.
Can I install a JK lift myself?
Bolt-on kits such as the TeraFlex Sport ST are a common DIY job. Long arm kits that require cutting and welding are best left to a shop. If you are near Nashville, Wreckless 4x4 in Lebanon, TN installs Jeep lift kits and suspension.
Need help choosing?
Call WP4x4 at (615) 235-5885 with your year, 2-door or 4-door, trim and tire goal.