Jeep Gladiator JT Lift Kit Buying Guide
The 2020-2026 Jeep Gladiator JT shares a lot with the Wrangler JL, but its longer wheelbase, bed loads and the Mojave trim mean you should buy a lift made for the JT. This guide covers tire size, lift height, kit types and the JT-specific checks, using the specs the manufacturers publish for the kits we sell. If you already know the kit you want, confirm the details in our Gladiator JT lift kit fitment guide, or browse all Jeep Gladiator JT lift kits.
Step 1: Start with your tire goal
Tire fitment on a JT depends on trim, fenders and bump stops. Two examples from kits we carry:
- Rock Krawler Adventure (1.5"): Rock Krawler lists 35" tires with full OEM fenders on Sport and Sahara models (2" bump stop height recommended), 37" with trimmed or high-lined fenders (3" bump stop), 37" on a Rubicon with full OEM fenders (2" bump stop) and 38" on a Rubicon with trimmed or high-lined fenders (3" bump stop).
- TeraFlex Sport ST4 4.5" (EcoDiesel): TeraFlex lists 35-37" tires on Sport/Overland fenders and 37-39" on Rubicon fenders, with specific bump stop extensions for each size. It also notes that models with plastic bumpers need the bumper-to-fender wind deflectors removed to fit 35" or larger tires.
Backspacing matters too. TeraFlex calls for aftermarket wheels with 4.75" of backspacing or less, or wheel offset adapters. Rock Krawler recommends 3.5" of backspacing for 37" tires on Sport and Overland models, and on a Rubicon 4.5" for 37" tires and 3.5" for 38-40" tires. Shop wheels and tires to match.
Step 2: Pick a lift height
- Leveling and 1.5": the MetalCloak JT leveling kit is MetalCloak's entry-level system, built so you can add performance over time. The Rock Krawler JT Adventure kit comes in 1.5" or 3".
- 2.5" to 3": the most common range. Options include the MetalCloak JT 2.5" True Dual Rate kit, the MetalCloak JT 2.5" Rocklander Overland kit and the Rock Krawler Adventure-X mid arm kit (3" or 4.5").
- 3.5" to 4.5": for 37" and larger tires. Look at the TeraFlex Sport ST (EcoDiesel, 2.5" or 4.5"), the MetalCloak JT 4.5" 4-Link long arm kit and the TeraFlex Alpine RT long arm kit (EcoDiesel, 3.5" or 4.5").
Rock Krawler bases its lift heights on a Rubicon with a front bumper and winch, rear bumper and full-size spare. It recommends going up 1" in rear coil height for an overland or heavily loaded build, which matters on a truck that may carry weight in the bed.
Step 3: Understand the kit types
Bolt-on spring and bracket systems
TeraFlex describes its Sport ST kits as a bolt-on install with no cutting or welding. Bolt-on sport frame brackets install between the factory frame mounts and the control arms, and the extended-travel kits are designed to provide 16" of rear suspension travel. They do not include shocks.
Complete mid arm systems
Rock Krawler's Adventure and Adventure-X kits are complete bolt-in systems. The Adventure kit uses service-free control arm joints and triple rate coils, and Rock Krawler says all of its JT systems include pads that help minimize factory spring bow. MetalCloak's JT kits use Duroflex joints, True Dual Rate coils, Durotrak-equipped track bars and height-adjustable bump stops. The Rocklander Overland version uses True Dual Rate Overland coils that MetalCloak says handle higher payloads without sagging.
Coilover systems
Rock Krawler offers coilover versions of several JT kits, such as the X-Factor coilover kit (3" or 4.5"). Rock Krawler notes that the coilover systems require removing the OEM shock mount from the frame and the shock and spring mount from the axle, and welding the new coilover mount to the axle.
Long arm systems
The MetalCloak JT 4.5" 4-Link is a bolt-on long arm system that MetalCloak says requires zero welding. MetalCloak also notes that at the 4.5" lift height, driveline vibration at certain speeds may cause premature CV joint wear, and that fitment on 2026 models has not been confirmed. The TeraFlex Alpine RT uses bolt-on Alpine IR long arms and brackets and HD forged adjustable track bars, and it requires cutting and removing the factory control arm brackets.
Step 4: JT-specific checks
- Mojave or not: several MetalCloak kits, including the 2.5" True Dual Rate and 2.5" Rocklander, exclude the Mojave. MetalCloak sells Mojave-specific kits such as the JT Mojave 2.5" Game-Changer, which offers mounts to reuse the factory Mojave shocks.
- Engine: many kits list the 3.6L gas and 3.0L EcoDiesel separately. The TeraFlex Sport ST and Alpine RT kits linked above are the EcoDiesel versions.
- Axle and trim: MetalCloak supplies RockSport shock brackets by axle type (Rubicon/Max Tow wide track or Sport standard width), and correct wheel backspacing is required.
- Driveshaft: MetalCloak says an aftermarket driveshaft will be needed with its long-travel JT kits, and Rock Krawler recommends a new front driveshaft if you plan to off-road routinely. Shop driveshafts.
Step 5: Plan the supporting parts
- Track bars: see Gladiator JT track bars.
- Control arms: shop control arms.
- Bump stops: see bump stops and limit straps.
- Gearing: bigger tires usually need a re-gear. Shop ring and pinion.
- Bumpers: heavier steel bumpers and winches change ride height. Compare options in our Best Jeep Gladiator Bumpers guide.
- Alignment: TeraFlex lists an alignment as required, and MetalCloak recommends a suspension specialist align the Jeep after install.
Quick comparison
| Kit | Lift | Type | Notes |
|---|---|---|---|
| MetalCloak JT leveling kit | Leveling | Entry-level system | JT |
| Rock Krawler Adventure | 1.5" or 3" | Bolt-in mid arm | 3.6L gas and EcoDiesel options |
| MetalCloak 2.5" True Dual Rate | 2.5" | Complete kit | Excludes Mojave |
| MetalCloak 2.5" Rocklander Overland | 2.5" | Mid arm, overland coils | Excludes Mojave |
| MetalCloak Mojave 2.5" Game-Changer | 2.5" | Mid arm | Mojave only |
| Rock Krawler Adventure-X | 3" or 4.5" | Bolt-in mid arm | Coilover version also offered |
| TeraFlex Sport ST | 2.5" or 4.5" | Bolt-on, no shocks | EcoDiesel |
| MetalCloak 4.5" 4-Link | 4.5" | Bolt-on long arm | No welding |
| TeraFlex Alpine RT | 3.5" or 4.5" | Long arm, no shocks | EcoDiesel |
FAQ
Can I use a Wrangler JL lift kit on a Gladiator?
Buy a kit that lists the JT by name. Every kit in this guide is sold as a JT-specific system, and the product page lists the exact models it fits.
What lift do I need for 37" tires on a Gladiator?
It depends on trim and fenders. Rock Krawler lists 37" tires on a Rubicon with full OEM fenders even at 1.5" with its Adventure kit, while TeraFlex rates its 4.5" Sport ST for 35-37" tires on Sport/Overland fenders. Always check the tire chart on the product page.
Can I install it myself?
Bolt-on kits are a common DIY job. Coilover and long arm kits that require cutting or welding are best left to a shop. Near Nashville, Wreckless 4x4 in Lebanon, TN installs Jeep lift kits and suspension.
Need help choosing?
Call WP4x4 at (615) 235-5885 with your year, trim, engine and tire goal.