Black Friday: Oracle Lighting 15% off now · Baja Designs 20% off Nov 25 – Dec 2Shop deals Black Friday: Oracle 15% off now ·Shop deals

How to Choose a Jeep Winch

A winch is the recovery tool that gets you out when traction and spotting are not enough. Choosing one comes down to capacity, rope type, controls, waterproofing and how it mounts to your Jeep or Bronco. This guide walks through each choice using the published specs of winches WP4x4 sells from WARN, ARB, Overland Vehicle Systems, Rugged Ridge and Bulldog Winch. To browse every option, see all winches.

Step 1: Choose the right capacity

A widely used rule of thumb is a rated line pull of at least 1.5 times your vehicle's gross vehicle weight rating, which you can find on the door jamb sticker. Built Jeeps with steel bumpers, armor, big tires and gear in the back weigh far more than stock, so many owners go up a size. Winch ratings are single-line pulls, and you can increase pulling power by double-lining the rope through a snatch block.

Step 2: Synthetic rope or steel cable

Synthetic rope is lighter and easier to handle, and it pairs with a hawse fairlead. Steel wire rope is more resistant to abrasion and heat, and it pairs with a roller fairlead. The weight difference is real. WARN lists the 8,000 lb EVO with 90 ft of 3/8" synthetic at a 65.9 lb shipping weight, and the same winch with 90 ft of 5/16" wire rope at 85.1 lb. Never run synthetic rope through a roller fairlead that has been used with steel cable, because burrs can damage the rope. Shop winch lines and fairleads for replacements.

Step 3: Controls and electrical

  • WARN EVO: includes a 2-in-1 remote that works corded or wireless, a sealed Albright contactor and a control pack that can be relocated for low-profile installs.
  • WARN ZEON XD: includes a waterproof corded remote with a 12 ft lead and the WARN HUB receiver for 100 ft+ wireless range with the WARN HUB app.
  • ARB winch: the motor control is built into the winch with a custom Albright contactor, so there is no separate control box. ARB says the remote works wirelessly at up to 40 meters or with a 5-meter lead, and a 500A isolation switch is included.
  • OVS S.C.A.R. 10S: a wireless remote with an 11.5 ft removable lead and a 500A solenoid. Overland Vehicle Systems recommends a battery of at least 650 CCA.

Winching draws heavy current, so keep the engine running during a pull and check the battery recommendation for your winch. Add-ons such as remotes and control packs are in winch accessories and parts.

Step 4: Waterproofing, gearing and brakes

  • Sealing: the WARN EVO, ARB winch and OVS S.C.A.R. are IP68 rated, and the Rugged Ridge Trekker is IP-68 rated. WARN rates the ZEON XD IP68K for submersion and IP69K for high-pressure spray.
  • Gear train: the WARN EVO uses an all-metal three-stage planetary gear train. The ARB winch uses a 4-stage hardened steel gearbox with a 171:1 ratio. The OVS S.C.A.R. 10S is a 3-stage planetary at 181:1, and the Rugged Ridge Trekker is a 3-stage planetary at 212:1.
  • Line speed: WARN lists no-load line speeds up to 40 ft/min for the ZEON XD, and Overland Vehicle Systems lists 42 ft/min for the S.C.A.R. 10S.
  • Brake: the WARN EVO has an automatic load-holding brake rated for the full load, and the ARB winch uses a gearbox-mounted brake that ARB says provides 100% load holding.

Step 5: Plan the mount

Most Jeep winches bolt to a winch-ready bumper or a winch plate behind the factory bumper. The OVS S.C.A.R. 10S, for example, uses the standard 10" x 4.5" bolt pattern. Check the bumper's listed winch fitment and any fairlead mounting notes, and see front bumpers. Gladiator owners can compare winch-ready options in our Best Jeep Gladiator Bumpers guide. The WARN EVO's armor is removable for tight mounting spaces.

Step 6: Build a recovery kit

A winch is only part of a safe recovery. Add a tree saver, a snatch block, recovery shackles and a line damper, and use a rated recovery point on each vehicle. Shop recovery kits and gear, winch hooks and winch accessories.

Quick comparison

Winch Capacity Rope Highlights
WARN EVO 8,000, 10,000 or 12,000 lb Synthetic (hawse) or steel (roller) 2-in-1 remote, IP68, limited lifetime mechanical and 7-year electrical warranty
WARN ZEON XD 10-S 10,000 lb Spydura synthetic Up to 40 ft/min no-load, IP68K/IP69K, HUB wireless
ARB winch 10,000 lb (12,000 lb version) Synthetic Integrated control, 4-stage gearbox, isolation switch included
OVS S.C.A.R. 10S 10,000 lb Synthetic 7.0 hp series wound motor, IP68, 10" x 4.5" mount
Rugged Ridge Trekker 10,000 lb (12,500 lb version) Synthetic with wireless remote, or steel with wired remote 3-stage planetary, 212:1, IP-68

FAQ

What size winch do I need for a Jeep Wrangler or Gladiator?

Start with the 1.5 times GVWR rule of thumb using the rating on your door jamb sticker, then size up for steel bumpers, armor, bigger tires and cargo.

Is synthetic rope worth it?

For most Jeep owners, yes. It is lighter and easier to handle. Steel is still a good choice where abrasion and heat are a concern.

Will a winch fit behind my factory bumper?

Some setups use a winch plate behind the factory bumper, and many aftermarket bumpers are winch-ready. Check the bumper's product page for the winch sizes it accepts.

Need help choosing?

Call WP4x4 at (615) 235-5885 with your vehicle, bumper and how you wheel.