Bronco Off-Road Lighting Guide
The 2021-2026 Ford Bronco (not the Bronco Sport) was designed with off-road lighting in mind. It has factory "Accessory Ready" mounting points near the A-pillars, a modular steel bumper on many trims, and an available auxiliary switch bank. That makes it one of the easiest trucks to light up properly, as long as you buy parts made for your bumper and wiring. This guide walks through each mounting location, the kits we sell for it, and the specs the manufacturers publish. Shop everything in 2021-2026 Ford Bronco parts, or browse auxiliary lights and light bars.
Before you buy: three things to check
- Your front bumper. Many fog pocket kits are made only for the factory steel modular bumper, and some only for the plastic bumper. For example, Baja Designs sells its 6 XL Linkable kit in a steel bumper version (447750) and a plastic bumper version (447768).
- Your headlights. Broncos came with base or Signature headlights. Some upgrades, like Oracle's halo kits, are for base headlights only, while the Oracle Oculus headlights fit both.
- Your switches. Kits marked "w/ Upfitter" are wired for the Bronco's factory auxiliary switch bank. Standard kits include their own switch harness.
Headlights
Replacing the factory headlights gives the biggest improvement for everyday night driving.
- Oracle Oculus Bi-LED Projector Headlights: a plug-and-play replacement rated at 5,200 lumens that installs with the original mounting hardware and factory connector, without extra relays or harnesses. Oracle says it works with both standard and Signature lighting models, and it has a sharp cutoff designed to limit glare on lifted Broncos. White or amber halo.
- Morimoto XB LED Headlights (LF497-A): a single large projector with a four-point amber DRL design for 2021+ Broncos.
- AlphaRex NOVA-Series LED Projector Headlights for the Bronco.
- Keeping your base headlights? Oracle's LED halo kit and ColorSHIFT halo kit with DRL bar are made for base headlights.
Aim new headlights after installation. See all headlights.
Fog lights and bumper fog pockets
Fog pocket kits replace the factory fog openings with LED pods. Several include SAE-compliant fog lights for road use plus off-road pods you can switch separately.
- Diode Dynamics Stage Series Sport Fog Pocket Kit (DD7178): for steel bumpers, with two SS3 pods in an SAE fog pattern and four SSC2 pods in a combo pattern, and harnesses to control road-legal and off-road lighting from the factory aux switches. A yellow version and a Max kit are also available.
- Baja Designs Squadron SAE / Dual S2 Sport Fog Pocket Kit w/ Upfitter (447762UP): for the factory steel bumper, with Squadron SAE lights that meet SAE J583 fog lamp requirements (2,420 lumens per light, per Baja) plus S2 Sport pods in spot and driving combo.
- KC HiLiTES FLEX ERA Fog Pocket Kit (BFHB-97168).
- Oracle Triple LED Fog Light Kit (5890-001): for the steel mod bumper, six emitters with 6,000 raw lumens and an IP68 rating, bolt-on with no drilling. Also in amber and yellow.
- Rigid 360-Series PRO SAE Fog Light Kit (37121): SAE J583 compliant 4" dual color fogs (selective yellow and white in one lamp) that fit the OEM fog location.
- Rigid Mod Bumper Triple SR-M Fog Light Kit (46731).
More options in fog lights.
A-pillar and ditch lights
Ditch lights light up the sides of the trail and the inside of corners, where headlights and light bars don't reach.
- Diode Dynamics SS3 Pro Backlit Ditch Light Kit (DD7186): bolts to the factory Accessory Ready points near the A-pillars with no cutting or drilling, and Diode says it won't interfere with the antenna or opening the hood.
- Baja Designs XL Sport A-Pillar Kit: two XL Sport spot lights (3,150 lumens each, per Baja) with wide cornering lenses included, a relay harness with toggle switch and no-drill installation. Step up to the XL Pro or XL80 kits for more output.
- Oracle LED Off-Road Side Mirror Ditch Lights (5894-001): LED light bars built into factory-style side mirrors.
- Brackets only: Rigid dual pod A-pillar mount (46721) and Morimoto 4Banger A-pillar brackets (BAF070).
Roof and windshield light bars
A roof bar gives the most reach for high-speed desert and dirt road driving. Roof-mounted lights can reflect off the hood, and they are for off-road use, so check your local laws.
- Baja Designs 50" OnX6+ Roof Light Bar Kit (447757): 39,430 lumens from 30 Cree LEDs (355W, per Baja), with Bronco-specific brackets, hardware and toggle harness, and no cutting or drilling. Also offered with upfitter wiring, and as a lower-cost 50" S8 kit.
- Oracle Integrated Windshield Roof LED Light Bar (5888-023): a molded cowling that follows the factory roof line, with 30 8W emitters (18,000 raw lumens, per Oracle) and selectable amber or white clearance lights. Mounts with factory hardware.
- Rigid Roof Line Light Kit w/ 40" SR Spot/Flood Combo (46724): brackets, isolation bases, light bar, covers and harness. Rigid lists it as off-road use only.
Bumper light bars
- Baja Designs 6 XL Linkable kit: six XL Sport lights linked into one bar (18,900 lumens, per Baja) with brackets, harness and rock guards. Baja notes it may block part of the front camera's view on equipped Broncos.
- KC HiLiTES Gravity LED Pro6 39" Light Bar Kit (BFHB-91341) for the front bumper.
- For plastic or Capable bumpers: Nacho light mount (V1BC3).
Reverse, rear and cargo lighting
- Diode Dynamics Stage Series Reverse Light Kit: mounts pods to the spare tire using extension lugs, with a plug-and-play harness that can run with the reverse lights or from the factory switches, plus a red running light.
- Baja Designs Dual S2 Sport W/C Reverse Kit (447767): two S2 Sport wide cornering lights with bracket and toggle harness. Also available with a license plate mount.
- Oracle V2 Flush Mount LED Tail Lights for factory halogen tail light models.
- Oracle LED Cargo Light Module.
Spot, flood, driving and SAE: which beam?
- Spot: a narrow beam for distance. Best on roof bars and for high speeds.
- Flood and wide cornering: wide, short beams for the sides of the trail and work areas. Good for ditch and reverse lights.
- Driving or combo: a mix of reach and spread. The most versatile all-around pattern.
- SAE fog: a low, wide beam with a cutoff, made for road use in rain, fog and dust. Look for SAE J583 compliance if you want street-legal fog lights.
Many drivers prefer amber or selective yellow in dust, rain and snow because it produces less glare back at the driver, which is why many fog kits offer it.
Wiring tips
- Use the harness included with the kit, or an upfitter version if you want to use the factory aux switches.
- Check total current draw when you add several lights. The 50" OnX6+ alone draws 28.2A, according to Baja.
- Shop switches and switch panels and light mounts and brackets.
FAQ
Do these lights fit the Bronco Sport?
No. These kits are for the full-size 2021-2026 Ford Bronco only.
Are LED light bars street legal?
Most off-road lights, including roof bars, are for off-road use only. SAE J583 fog lights are made for road use. Check your state's laws.
Need help with fitment?
Call WP4x4 at (615) 235-5885 with your Bronco's year, trim, bumper and headlight type and we will help you confirm the right kit.