The Rock Krawler Suspension JT 3.0-inch ADVENTURE - X Mid-Arm System - DIESEL SPECIFIC is specifically designed for Sport and Overland owners who want a complete system, bolt-in installation, and some of the best articulation of any MID-ARM kit on the market. Our system proves its durability and off-road performance every time you hit the streets or trail! The Term, Adventure - X includes eight adjustable control arms with our 100% Service Adventure Series joints installed. The industry-leading, Adventure - X mid-Arms feature adjustable upper and lower control arms and offer 70 degrees of misalignment when paired with our Adventure series Joints at the frame connection and the axle. The inherent bind in a factory JL/JT control arm is greatly reduced.

With so much adjustability, it allows you to precision-tune the JT's caster and pinion angle front and rear. Driving you home with the most comfortable ride possible in a Gladiator is our TRIPLE RATE front coils and QUAD RATE rear coils. All four coils work together to achieve excellent on-road comfort that we feel is better than the OEM springs. The coil is built with the proper "Free-length" for off-road articulation. It stays firmly seated in the coil bucket (if a proper length shock is installed), and overall, it is a very controlled reaction to bumps, rocks, sand, mud, and whatever else you can throw at them! All Rock Krawler JT systems include correction pads that reduce the spring bow inherent in the factory setup. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles, so there is no compromise in on-road handling.

Benefits:

Complete bolt-in system
Excellent highway ride and handling
The best off-road ability of all Mid Arm Systems
Improved rear roll center
Tuned Triple Rate Coils
Spring Correction Seats
Vehicle lean correction
Upgradable to RK Longarm System
Abuse Proof Lifetime Warranty
Best Technical support in the industry
Jeep remains level on all four corners

Remote Reservoir 2.625" Coilover Shocks: Remote reservoir standard, IFP construction, MASSIVE 2.625" shock bodies, fluted aluminum bodies, 1" shaft, 1.25" mounting width, hard coat military grade black anodizing, fully serviceable and rebuildable.

RRD Spec Front Remote Reservoir Coilover

Part Number RRD07640RR

RRD Spec Remote Reservoir (NON-Coilover) Rear Shock

Part Number RRD07641RR

Wheel Fitment:

Sport and Overland Wheel Fitment Recommendations:
37”/38” Tall Tires - Recommend 3.5” of Back Spacing
Rubicon Fitment Recommendations
37” Tall Tires – Recommend 4.5” of Back Spacing
40” Tall Tires – Recommend 3.5” of Back Spacing

Tire Fitment:

Sport and Overland with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Overland with Trimmed or High-Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37”/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High-Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)

General Notes:

All lift heights are based on Rubicon models for standard style build (i.e., front bumper and winch, rear bumper, and full-size spare).
If building with a spare delete, we recommend dropping 1” in coil lift height for the rear. If building an "overland style" or heavily up-fitted build in the back, we recommend upsizing 1” in coil lift height for the rear.
We recommend a new front driveshaft if you plan to off-road routinely. (Adam's Drivesahft, Tom Woods, J.E. Reel)
Requires removal of the OEM shock mount off the frame (*If coilover system is purchased)
Requires removal of the OEM shock and spring mount off the axle (*If coilover system is purchased) Requires welding of the new coil over the mount on the axle only (*If coilover system is purchased)
Designed to maintain 1/2" of rake on Rubicon Models