Old Man Emu offers a range of tuned and matched integrated suspension systems to ensure the right suspension is available to suit how the vehicle is outfitted and the conditions it will encounter. Old Man Emu suspension systems are designed to enhance ride quality, ride control, load-carrying capacity, and ride height. When building an off-road vehicle, it’s best to notate the heavy parts that you plan to add. Heavy components will slowly begin to compress your suspension which results in vehicle sag. To avoid ride discomfort and having to change components down the road, plan ahead for future additions.

This saves you time and money changing suspension down the road. We recommend that daily drivers consider only constant load while strictly off-road vehicles can consider both constant and gear load. Although suspension comfort is subjective, most of us aim for an enjoyable ride. To maximize comfort, it is best to prioritize the constant weight when choosing your Old Man Emu suspension. If you choose a suspension that is “heavier” than the constant load, this will likely result in a stiff and unpleasant ride. This suspension system was designed for medium load configurations.

On and off-road drivability is achieved with a 2-inch lift that provides increased clearance and allows for the fitment of larger tires.  35-inch tires are optimal without the need to replace or modify costly components
A range of multi rate frequency tuned coil springs were extensively developed which offers exceptional comfort at ride height and optimized control in loaded scenarios
Front and rear struts were tuned to match the range of springs that were developed and provide exceptional control and comfort on all types of road surfaces
Kit contains 8 trim packers to allow for left to right and front to rear trimming and provide flexibility to account for load and load distribution scenarios
The panhard relocation bracket corrects geometry at the lifted height and greatly improves vehicle dynamics
Designed for tougher off-road terrain and tested to exceed the OEM design
Medium load kits are suitable for vehicles equipped with an aftermarket bumper
Optional front sway bar (OMESTAB10) is highly recommended for improved control in loaded scenarios

Fitment Note: Medium Front/Medium Rear Loads with a Front Bumper or Winch, and up to 330 lbs Added Constant Rear Weight