{"product_id":"motobilt-the-hammer-series-front-bumper-w-stinger-bare","title":"MOTOBILT THE HAMMER SERIES FRONT BUMPER W\/ STINGER - BARE","description":"\u003cp\u003eMotobilt now offers the Jeep Hammer Stinger front bumper with fog light holes. It features DOM steel tube stinger and built in provisions for factory style fog lights. The Motobilt Jeep Front Hammer Bumper is a 48.5-inch-wide, sleek, tight-fitting design proudly made in the USA. Our Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep. The front d-ring mounts are CNC cut from 3\/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\n\u003cp\u003eThe Hammer Stinger bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16-inch-thick high strength steel plate. The bumper also serves as a winch mount. The top side of the Hammer bumper has bolt holes for a recovery winch.\u003cbr\u003e\nFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eJeep Stinger Hammer 48.5-inch front bumper.\u003cbr\u003e\n\tStinger made from 1 3\/4-inch steel DOM tube and laser cut gussets from 3\/16-inch steel.\u003cbr\u003e\n\tFabricated from 3\/16-inch-thick high strength steel plate\u003cbr\u003e\n\tBolt on design\u003cbr\u003e\n\t3\/4-inch-thick steel d-ring mounts\u003cbr\u003e\n\tPass through d-ring mounts weld to the bumper\u003cbr\u003e\n\tIncluded Fog Light Holes\u003cbr\u003e\n\tPre-installed riv nuts for 10-24 screws for the factory fog lights\u003cbr\u003e\n\tMade in the USA\u003cbr\u003e\n\tSold as each\u003c\/p\u003e\n\n\n\u003cp\u003eNote:\u003c\/p\u003e\n\n\n\t\u003cp\u003eIf installing a winch, MB1002 fairlead mount will also need to be purchased.\u003cbr\u003e\n\tMotobilt bumpers ship bare steel, paint or powder coat needed before use.\u003cbr\u003e\n\tYou must fully install BEFORE painting and then removed for paint or powder coating.\u003cbr\u003e\n\tNo cutting required on the frame rails on your Jeep\u003cbr\u003e\n\tLED fog light NOT included but sold separately.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582477193393,"sku":"MB1090F-S","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hulrmilfgv758cqysrf4.jpg?v=1768188209","url":"https:\/\/wp4x4.com\/products\/motobilt-the-hammer-series-front-bumper-w-stinger-bare","provider":"WP4x4","version":"1.0","type":"link"}