{"title":"MetalCloak JK Parts","description":"\u003cp\u003eShop MetalCloak parts for the 2007-2018 Jeep Wrangler JK at WP4x4. This collection includes MetalCloak products tagged for the JK, such as shocks, ball joints, lift components, fenders and armor where those parts are listed.\u003c\/p\u003e\u003cp\u003eMost MetalCloak parts are model-specific, so check each product page for exact JK fitment, including 2-door or 4-door notes and any hardware that is sold separately. If you are building a lift, compare the kit contents and supporting parts rather than lift height alone.\u003c\/p\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/metalcloak\"\u003eMetalCloak\u003c\/a\u003e products, or shop \u003ca href=\"\/collections\/metalcloak-lift-kits\"\u003eMetalCloak lift kits\u003c\/a\u003e and \u003ca href=\"\/collections\/2007-2018-jeep-wrangler-jk-lift-kits\"\u003eJeep Wrangler JK lift kits\u003c\/a\u003e across brands. Related parts are also in \u003ca href=\"\/collections\/fenders\"\u003efenders\u003c\/a\u003e, \u003ca href=\"\/collections\/ball-joints\"\u003eball joints\u003c\/a\u003e, and \u003ca href=\"\/collections\/lift-kits\"\u003eJeep lift kits\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWant it installed?\u003c\/strong\u003e \u003ca href=\"https:\/\/www.wreckless4x4.com\/services\"\u003eBook an install at Wreckless 4x4\u003c\/a\u003e, WP4x4's sister shop serving Nashville and Middle Tennessee.\u003c\/p\u003e","products":[{"product_id":"metalcloak-rocksport-black-4-5-5-5-jk-wrangler-reservoir-long-travel-shocks-front-pair","title":"Metalcloak RockSport BLACK 4.5\"\/5.5\" JK Wrangler Reservoir Long Travel Shocks, Front, Pair","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Shipping Within 1 Week\u003c\/p\u003e\n\u003cp\u003eRockSport Black Reservoir Shocks are custom engineered, meticulously designed and precision manufactured in-house here at MetalCloak. These Aluminum Bodied 2.5in reservoir shocks have 8 precision compression settings that allow you to tune specifically to meet your Gold standard.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures Include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the JK Wrangler\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III HARD Anodized Black Infinity Finish\u003c\/li\u003e\n\u003cli\u003eEasy Setting Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e2½” Diameter Aluminum Body\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 3\/16\" Wall Thickness\u003c\/li\u003e\n\u003cli\u003eOversized for Maximum Cooling\u003c\/li\u003e\n\u003cli\u003eRubber Covered Stainless Steel Braided Hydraulic Hose\u003c\/li\u003e\n\u003cli\u003eBuilt in Stand Offs for OE Quality Fitment\u003c\/li\u003e\n\u003cli\u003eHuge Oversized 7\/8\" Shafts\u003c\/li\u003e\n\u003cli\u003eShafts have Induction Hardened Surface\u003c\/li\u003e\n\u003cli\u003eShafts are Hard Chrome Plated\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III Clear HARD Anodized Shock Piston\u003c\/li\u003e\n\u003cli\u003eParabolic Valve Stack\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(multiple patents pending)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"MetalCloak","offers":[{"title":"I have a factory axle (no extra parts)","offer_id":44254392877233,"sku":"","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"I have an aftermarket axle (weld on shock bracket) (7194) +49.00","offer_id":44254392910001,"sku":"","price":1548.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1612-new-with-logo_1-Copy.webp?v=1718382554"},{"product_id":"metalcloak-rocksport-black-4-5-5-5-jk-wrangler-reservoir-long-travel-shocks-rear-pair","title":"Metalcloak RockSport BLACK 4.5\"\/5.5\" JK Wrangler Reservoir Long Travel Shocks, Rear, Pair - 1614","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Shipping Within 1 Week\u003c\/p\u003e\n\u003cp\u003eRockSport Black Reservoir Shocks are custom engineered, meticulously designed and precision manufactured in-house here at MetalCloak. These Aluminum Bodied 2.5in reservoir shocks have 8 precision compression settings that allow you to tune specifically to meet your Gold standard.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures Include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the JK Wrangler\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III HARD Anodized Black Infinity Finish\u003c\/li\u003e\n\u003cli\u003eEasy Setting Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e2½” Diameter Aluminum Body\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 3\/16\" Wall Thickness\u003c\/li\u003e\n\u003cli\u003eOversized for Maximum Cooling\u003c\/li\u003e\n\u003cli\u003eRubber Covered Stainless Steel Braided Hydraulic Hose\u003c\/li\u003e\n\u003cli\u003eBuilt in Stand Offs for OE Quality Fitment\u003c\/li\u003e\n\u003cli\u003eHuge Oversized 7\/8\" Shafts\u003c\/li\u003e\n\u003cli\u003eShafts have Induction Hardened Surface\u003c\/li\u003e\n\u003cli\u003eShafts are Hard Chrome Plated\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III Clear HARD Anodized Shock Piston\u003c\/li\u003e\n\u003cli\u003eParabolic Valve Stack (multiple patents pending)\u003c\/li\u003e\n\u003cli\u003eGold Zinc Shock\/Reservoir Mounts\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":44254400151729,"sku":"1614","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1613-new-with-logo.webp?v=1718382820"},{"product_id":"metalcloak-jeep-jk-wrangler-baller-joints™-hd-ball-joints-full-set","title":"Metalcloak Jeep JK Wrangler Baller Joints™, HD Ball Joints, Full Set - 1910","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003e\"BALLER\" Informal adjective:\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eextremely good, impressive or excellent\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eMetalCloak's Baller Joints™ HD Ball Joints for the Jeep JK Wrangler are the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures Include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoad Bearing Upper and Lower Joints\u003c\/li\u003e\n\u003cli\u003eHardened Tool Steel Races\u003c\/li\u003e\n\u003cli\u003eInduction Hardened Chromoly Spindle \u0026amp; Ball\u003c\/li\u003e\n\u003cli\u003eComposite Bushing for Radial Loads\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(Side to Side Movement)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad Rated Composite Bushing at over 23,000lbs-each X2!\u003c\/li\u003e\n\u003cli\u003eFully Sealed top and bottom O-ring AND Shaft Wiper Seals\u003c\/li\u003e\n\u003cli\u003eRecessed Zerk Fittings for Easy Service\/Grease\u003c\/li\u003e\n\u003cli\u003eAdjustable Pre Load for Upper \u0026amp; Lower Joints\u003c\/li\u003e\n\u003cli\u003eIn-JEEP Rebuildable Upper \u0026amp; Lower\u003c\/li\u003e\n\u003cli\u003eGold Zinc, Clear Zinc \u0026amp; Anodized Red Finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":44254410735793,"sku":"1910","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1910-with-logo.jpg?v=1793547293"},{"product_id":"metalcloak-front-jk-jl-jt-sway-bar-link-extension-kit-12-25","title":"Metalcloak Front JK\/JL\/JT Sway Bar Link Extension Kit, 12.25\" - 7015","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak JK\/JL Extended Sway Bar Links are the extended length links needed for lifted Jeeps that are equipped with factory sway bar disconnect.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures Include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtended to 12.25\"\u003c\/li\u003e\n\u003cli\u003eDesigned for MetalCloak's 3.5\" Lift\u003c\/li\u003e\n\u003cli\u003eOE Quality Fit and Finish\u003c\/li\u003e\n\u003cli\u003eEasy to Install\u003c\/li\u003e\n\u003cli\u003eDesigned for Electronic Sway Bar\u003c\/li\u003e\n\u003cli\u003eWorks with the MetalCloak JK\/JL\/JT Lift Kits\u003c\/li\u003e\n\u003cli\u003eGold Zinc Chromate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWhen Lifting a Jeep the sway bar links also need \u003c\/span\u003e\u003cspan class=\"extraText\"\u003eto increase in length to keep your sway bar adjusted properly. MetalCloak JK\/JL\/JT Extended Sway Bar Links bolt directly into the factory locations with no cutting or modification required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eFor use with JK\/JL Wranglers \u0026amp; JT Gladiators equipped with electronic sway bar.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":44852580516017,"sku":"7015","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/7015-with-logo.webp?v=1730478948"},{"product_id":"metalcloak-red-rocksport-long-travel-shocks-rear","title":"METALCLOAK RED ROCKSPORT LONG TRAVEL SHOCKS, REAR - 1009","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJK Wrangler RockSport RED Long Travel Shocks are custom designed and distributed only by MetalCloak. This trail proven, Twin Tube Shocks have proprietary valving tuned specifically to MetalCloak's exacting standards .\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eOversized 18mm chrome shafts\u003cbr\u003e\n\tDouble Welded Bushing Eyes\u003cbr\u003e\n\tNatural Rubber Mount Bushings\u003cbr\u003e\n\tNitrogen Gas charged to resist fading\u003cbr\u003e\n\tProtected with shaft Length Stone Guard\u003c\/p\u003e\n\n\n\u003cp\u003eRockSport RED Long Travel Shocks have been engineered to work in unison with MetalCloak's True Dual-Rate Coils. Properly valved and tested by the engineers at MetalCloak, RockSport RED shocks provide a fantastic ride on and off-road with a comfortable yet stable compression and rebound cycle with lots of travel.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e\n\n\u003cp\u003eNone: The RockSport RED Shocks WILL NOT fit \u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579556548785,"sku":"1009","price":178.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/lkxenvzdrnfwpev8cszw.jpg?v=1768083642"},{"product_id":"metalcloak-sway-bar-quick-disconnect","title":"METALCLOAK SWAY BAR QUICK DISCONNECT - 7014","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe JK Jeep Wrangler Front Sway Bar Quick Disconnect (12\" length), by MetalCloak bolt directly into the factory locations and allow for manual disconnect of the front sway bar.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eExtension Bracket for Easy Access\u003cbr\u003e\n\tSway Bar Disconnects\u003cbr\u003e\n\tRubber Boot Seal\u003cbr\u003e\n\tBar Pin Quick Clips\u003cbr\u003e\n\tGrade 8 Zinc Plated Bolts\u003cbr\u003e\n\tZinc Plated Laser Cut Disconnect Mount Brackets\u003c\/p\u003e\n\n\n\u003cp\u003eDisconnecting the sway bar while off-road allows your Jeep to achieve the maximum articulation that your suspension has been designed for. MetalCloak Quick Disconnects are easy to disconnect and then re-connect; unique to the MetalCloak system, is an extension bracket that allows easier access for reaching the attachment point.\u003c\/p\u003e\n\n\u003cp\u003eThese quick release disconnects are bolt on and fit without any cutting required. These front sway bar quick disconnect are designed to work in conjunction with MetalCloak's 2.5''-4.5'' Mid Arm lift kits.\u003c\/p\u003e\n\n\u003cp\u003eNote: For use with JK Wranglers NOT equipped with electronic sway bar disconnects.\u003cbr\u003e\n \u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579556745393,"sku":"7014","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc7014_1.jpg?v=1768083648"},{"product_id":"metalcloak-front-and-rear-durotrak-track-bars","title":"METALCLOAK FRONT AND REAR DUROTRAK TRACK BARS - 7242","description":"\u003cp\u003eJK Wrangler Jeep Front and Rear Durotrak Adjustable Track Bars is designed strong to meet the demands of on and off-road driving for your lifted Jeep.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eSolid 4130 1.25 Chromoly\u003cbr\u003e\n\tPatented 2 piece Durotrak bushings on both ends\u003cbr\u003e\n\tAdjustable for length\u003cbr\u003e\n\tPrecision Locking Nut\u003cbr\u003e\n\tClearance for Factory \u0026amp; Aftermarket Differentials\u003cbr\u003e\n\tForged End\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eThe Durotrak adjustable front and rear track bars for the Jeep JK Wrangler are built with Patented Durotrak 2 piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar. The bar is finished in gold zinc for the ultimate in durability against the elements.\u003c\/p\u003e\n\n\u003cp\u003eThe Durotrak bushing is housed in a forged adjustable end providing a 37% higher fatigue strength over inferior cast parts, this EXTRA rock bashing strength will hold up to whatever you throw at em.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e\n\n\u003cp\u003eNote: The Rear Track Bar is designed to work with the (7012) mounting bracket.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579556876465,"sku":"7242","price":638.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ga0d6abyp4h6l7vuqlkr.jpg?v=1768083653"},{"product_id":"metalcloak-outboard-shock-mount-spacer-relocation-kit-lower-front","title":"METALCLOAK OUTBOARD SHOCK MOUNT SPACER RELOCATION KIT - LOWER FRONT - 7104","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak JK Outboard Front Lower Shock Mount Spacer Kit is engineered to move the lower shock mounts away from the JK Wrangler Jeep frame rails and turn shock eyelets for optimized performance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eDriver \u0026amp; Passenger Lower Front Shock Mount Brackets\u003cbr\u003e\n\tStrong 3\/16\" Hot Rolled Steel Plate\u003cbr\u003e\n\tShock Mount Spacers\u003cbr\u003e\n\tAll Necessary Hardware for Installation\u003cbr\u003e\n\tGold Zinc Plate Protection\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eWhen adding wheel travel shocks need space to move with the axle; factory shock mount locations allow the shock bodies to interfere with the Jeep frame rails and fasten the shock eyelet to go into bind instead of swing with the axle. MetalCloak's Outboard Front Lower Shock Mounts provide the needed clearance and turns the shock eyelet the correct direction to optimize performance. This is a simple bolt on kit that will improve the performance of your shocks.\u003c\/p\u003e\n\n\u003cp\u003eNote: The JK outboard front lower shock mount spacer kit is for stock axle application only.\u003c\/p\u003e\n\n\u003cp\u003eNote: If using OE wheels 2\" spacers will be needed to give proper clearance. These mounts are intended for use for wheels with 4.5\" of backspacing or less or an equivalent of a 2\" spacer on factory wheels.\u003c\/p\u003e\n\n\u003cp\u003eNote: The JK outboard front lower shock mount spacer kit may come with either hex head or button head hardware\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557007537,"sku":"7104","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/tgeqzv4gkpcybtkvvykm.jpg?v=1768083659"},{"product_id":"metalcloak-rear-sway-bar-link-extension-kit-12-25in","title":"METALCLOAK REAR SWAY BAR LINK EXTENSION KIT (12.25IN) - 7270","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak JK Sway Bar Links have extended length that is used for Jeeps that have been lifted 2.5 - 4.5 inches. These work well to replace the short factory equipped links and correct the angle of the factory sway bar.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eExtended to 12.25\"\u003cbr\u003e\n\tRubber Boot Seal\u003cbr\u003e\n\tDesigned for MetalCloak's 2.5''-4.5'' Mid Arm Lift Kits\u003cbr\u003e\n\tOE Quality Fit and Finish\u003cbr\u003e\n\tEasy to Install\u003cbr\u003e\n\tDesigned for Electronic Sway Bar\u003cbr\u003e\n\tWorks with the MetalCloak JK Lift Kits\u003cbr\u003e\n\tGold Zinc Chromate\u003c\/p\u003e\n\n\n\u003cp\u003eWhen Lifting a Jeep the sway bar links also need to increase in length to keep your sway bar adjusted properly. MetalCloak JK Sway Bar Links bolt directly into the factory locations with no cutting or modification required.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557400753,"sku":"7270","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/vil4dlmg4htdey3ewsbw.jpg?v=1768083676"},{"product_id":"metalcloak-rocksport-red-long-travel-shocks-front","title":"METALCLOAK ROCKSPORT RED LONG TRAVEL SHOCKS, FRONT - 1008","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJK Wrangler RockSport RED Long Travel Shocks are custom designed and distributed only by MetalCloak. This trail proven, Twin Tube Shocks have proprietary valving tuned specifically to MetalCloak's exacting standards .\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eOversized 18mm Chrome Shafts\u003cbr\u003e\n\tDouble Welded Bushing Eyes\u003cbr\u003e\n\tNatural Rubber Mount Bushings\u003cbr\u003e\n\tNitrogen Gas Charged to Resist Fading\u003cbr\u003e\n\tProtected With Shaft Length Stone Guard\u003c\/p\u003e\n\n\n\u003cp\u003eRockSport RED Long Travel Shocks have been engineered to work in unison with MetalCloak's True Dual-Rate Coils. Properly valved and tested by the engineers at MetalCloak, RockSport shocks provide a fantastic ride on and off-road with a comfortable yet stable compression and rebound cycle with lots of travel.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is Installed.\u003c\/p\u003e\n\n\u003cp\u003eNone: The RockSport RED Shocks WILL NOT fit a Jeep with no lift.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557466289,"sku":"1008","price":178.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/w3yxoeemwyizygrdf0qm.jpg?v=1768083679"},{"product_id":"metalcloak-6pak-shock-rear-mount-and-clearance-kit","title":"MetalCloak 6Pak Shock Rear Mount and Clearance Kit - 7020","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe 6Pak Rear Shock Mount \u0026amp; Clearance Kit, JK Wrangler allows for the easy installation of all sizes of the 6Pak Long Travel Shocks and increases ground clearance.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eDriver \u0026amp; Passenger 3\/16\" Steel Plate Lower Shock Mount Brackets\u003cbr\u003e\n\tLower Shock Mount Spacers\u003cbr\u003e\n\tUpper Rear Bar Pin Eliminators\u003cbr\u003e\n\tGold Zinc Plated Protection\u003cbr\u003e\n\tAdditional Shock Body Clearance\u003cbr\u003e\n\tAdditional Ground Clearance\u003cbr\u003e\n\tAll Necessary Hardware for Installation\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eBolt-In longer 6Pak shocks AND gain 3\" of ground clearance; This package allows the use of 6Pak shocks and eliminates the typical shock mounts that can limit travel. When used this provides clearance for the shock bodies and also allows trimming of the factory mounts providing up to an additional 3in of ground clearance.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557728433,"sku":"7020","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/bplzzkmvkbekxmn5bs0i.jpg?v=1768083688"},{"product_id":"metalcloak-bar-pin-eliminator-kit-upper-rear","title":"METALCLOAK BAR PIN ELIMINATOR KIT - UPPER REAR - 7011","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak JK Upper Rear Bar-Pin Eliminator Kit shock mount is designed to eliminate bind and eliminate parts that can loosen\/fail or freeze in place over time.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eTwo Bar-Pin Eliminators\u003cbr\u003e\n\tCAD Designed CNC formed\u003cbr\u003e\n\tGrade 8 Hardware\u003cbr\u003e\n\tRetains Original Mounting Position\u003cbr\u003e\n\tSide Movement Prevents binding of shafts\u003cbr\u003e\n\tAllows For 1\/2\" Of Additional Down Travel\u003cbr\u003e\n\tGold Zinc Plate\u003cbr\u003e\n\tDesigned For Use With The MetalCloak 6Pak Shocks.\u003c\/p\u003e\n\n\n\u003cp\u003eOnly the best mounts should be used for MetalCloak 6Pak shocks, and that is exactly what we have developed. MetalCloak has CNC sculpted these bar pin eliminators to perform and look great. Adds additional down travel and removes the chance of binding your shocks at the mounting location.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557826737,"sku":"7011","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mdzlvctlucsiixjuy1ay.jpg?v=1768083692"},{"product_id":"metalcloak-4-5-5-5in-rear-dual-rate-coil-springs","title":"METALCLOAK 4.5-5.5IN REAR DUAL RATE COIL SPRINGS - 7184","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJK Wrangler True Dual Rate Coils are manufactured of hi-tensile chrome silicon steel alloy that surpasses the typical aftermarket coil springs in extended length, ride quality and long-lasting durability. These springs are made specifically for the Jeep JK Wrangler applications.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eOne of the Longest Free Lengths in Industry\u003cbr\u003e\n\tStays in Coil Buckets, even at Full Droop\u003cbr\u003e\n\tSuperior Ride Quality\u003cbr\u003e\n\tExcellent On \u0026amp; Off Road Stability\u003cbr\u003e\n\tConsistent Ride Height\u003cbr\u003e\n\tResists Sagging\u003cbr\u003e\n\tAllows for Unbeatable Articulation\u003c\/p\u003e\n\n\n\u003cp\u003eMetalCloak has perfected dual rate coils for the Jeep market and provides stable off-road articulation, amazing on road handling, and great load handling capability. Our True Dual Rate Coils provide a lifted ride height and improves drivability over stock performance.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37inch tires, full body armor and suspension lift.\u003c\/p\u003e\n\n\u003cp\u003eNote: True Dual Rate Coils have been engineered to perform best with Duroflex control arms and 6Pak or RockSport shocks.\u003c\/p\u003e\n\n\u003cp\u003eNote: MetalCloak does not recommend powder coating your True Dual Rate coils. The baking process in powder coating can, in some cases, cause the metallurgical properties of the coils to be changed, resulting in the loss of the lift properties of the coils. As such, the process of powder coating the coils will void any warranty stated or implied in relation to the coils.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557859505,"sku":"7184","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/gbox8vcw7d0rlitd7xqe.jpg?v=1768083693"},{"product_id":"metalcloak-control-arms-upper-front","title":"METALCLOAK CONTROL ARMS UPPER FRONT - 7002","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak JK Upper Front adjustable Control Arms are are made with Strong 1.5\" DOM tubing for durability and equipped with Duroflex kevlar infused bushings. Get all the flex and premium control with the smoothest ride.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eCNC formed 1.5\" DOM x 3\/16\" Steel Tubing\u003cbr\u003e\n\tAdjustable Forged Threaded End with Lock lock nut\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tEquipped with Kevlar infused Duroflex™ Joints\u003cbr\u003e\n\tThe best Noise-Vibration-Harshness Dampening (NVH)\u003cbr\u003e\n\t68° of Maximum Articulation\u003cbr\u003e\n\tSelf Centering Joint shares load forces equally\u003cbr\u003e\n\tMaintenance Free Joint is Easily Rebuildable\u003c\/p\u003e\n\n\n\u003cp\u003eControl arms are made with Strong 1.5\" DOM tubing for durability. Adjustable Forged-threaded rod ends then give 37% higher fatigue strength over inferior cast parts.\u003c\/p\u003e\n\n\u003cp\u003eEquipped with Our Patented Duroflex Joints, these control arms feature the only self-centering, vulcanized elastomer joint that is enhanced with DuPont™ Kevlar® fiber. With incredible durability and more usable misalignment, The MetalCloak control arm offers better vibration dampening than anything else available; Duroflex joints are exclusive only to MetalCloak (see detailed info in the main body).\u003c\/p\u003e\n\n\u003cp\u003eAll parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557925041,"sku":"7002","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc7002_1.jpg?v=1768083696"},{"product_id":"metalcloak-control-arms-lower-front","title":"METALCLOAK CONTROL ARMS LOWER FRONT - 7001","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak Duroflex Lower Control Arms for the JK Jeep Wrangler. Built for strength and formed for clearance, the 1.5\" DOM arms are equipped with adjustable threaded Forged ends that can take trail abuse. Fitted with Duroflex Joints, these arms offer the best NVH properties that can be found.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eCNC formed 15\/8\" .25 DOM Steel Tubing\u003cbr\u003e\n\tAdjustable Forged Threaded Ends\u003cbr\u003e\n\tHigh Clearance Bends\u003cbr\u003e\n\tDuroflex Joints Enhanced with Kevlar\u003cbr\u003e\n\tVibration Dampening \u0026amp; Self Centering (best ride quality)\u003cbr\u003e\n\t68° of Maximum Articulation (typical arms only 40°)\u003cbr\u003e\n\tMaintenance Free and Easily Rebuildable\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tDesigned for Maximum UP and DOWN Travel\u003c\/p\u003e\n\n\n\u003cp\u003eStrong DOM tubing is carefully crafted for tire clearance and durability. The adjustable threaded rod ends are Forged that give a 37% higher fatigue strength over inferior cast parts, this EXTRA rock bashing strength will hold up to whatever you throw at em.\u003c\/p\u003e\n\n\u003cp\u003eFitted with Duroflex Joints, the only vulcanized elastomer, self-centering joint enhanced with DuPont Kevlar fiber – providing incredible durability with more misalignment in the control arms and better vibration dampening than anything else available. Exclusive to MetalCloak.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557957809,"sku":"7001","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc7001_1.jpg?v=1768083697"},{"product_id":"metalcloak-13in-6pak-shock-rear-passenger-side","title":"MetalCloak 13in 6Pak Shock - Rear Passenger Side - 1303","description":"\u003cp\u003eThe MetalCloak JK Jeep Wrangler 6Pak Rear Long Travel, Compact Body, Shock provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eStroke: 13\"\u003cbr\u003e\n\tCompressed Size Eye to Eye: 12 1\/4\"\u003cbr\u003e\n\tExtended Length Eye to Eye: 25 1\/4\"\u003cbr\u003e\n\tDual Opposing nitrogen charged Reservoirs\u003cbr\u003e\n\tFully Rebuildable \u003cbr\u003e\n\tImprove Wheel Travel and Ride Quality\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eEach shock is dyno-tested and mounting ends are preset for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.\u003c\/p\u003e\n\n\u003cp\u003eShock application is only limited by your knowledge and application\u003c\/p\u003e\n\n\u003cp\u003eNote: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty.\"\u003c\/p\u003e\n\n\u003cp\u003eNote: MetalCloak recommends you have a suspension specialist align your Jeep once suspension is installed.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579558645937,"sku":"1303","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dlr0j8s4gbxqsxvtjied.jpg?v=1768083709"},{"product_id":"metalcloak-13in-6pak-shock-rear-driver-side","title":"METALCLOAK 13IN 6PAK SHOCK REAR DRIVER SIDE - 1302","description":"\u003cp\u003eThe MetalCloak JK Jeep Wrangler 6Pak Rear Long Travel, Compact Body, Shock provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eStroke: 13\"\u003cbr\u003e\n\tCompressed Size Eye to Eye: 12 1\/4\"\u003cbr\u003e\n\tExtended Length Eye to Eye: 25 1\/4\"\u003cbr\u003e\n\tDual Opposing nitrogen charged Reservoirs\u003cbr\u003e\n\tFully Rebuildable \u003cbr\u003e\n\tImprove Wheel Travel and Ride Quality\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eEach shock is dyno-tested and mounting ends are preset for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.\u003c\/p\u003e\n\n\u003cp\u003eShock application is only limited by your knowledge and application.\u003c\/p\u003e\n\n\u003cp\u003eNote: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturer’s warranty.\"\u003c\/p\u003e\n\n\u003cp\u003eNote: MetalCloak recommends you have a suspension specialist align your Jeep once suspension is Installed.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579558711473,"sku":"1302","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/yt2ddstkuq8jvpbitaxn.jpg?v=1768083711"},{"product_id":"metalcloak-rocksprort-red-steering-stabilizer","title":"METALCLOAK ROCKSPRORT RED STEERING STABILIZER - 7133","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak's RockSport RED Steering Stabilizer Kit for the Jeep JK Wrangler provides the needed additional valving for your lifted Jeep with easy to install relocation brackets.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003e3\/16\" Steel Plate Axle Side Stabilizer Relocation Bracket\u003cbr\u003e\n\tRockSport Specifically Tuned Steering Dampener\u003cbr\u003e\n\tAll Mounting Hardware\u003c\/p\u003e\n\n\n\u003cp\u003eThis system contains the MetalCloak Steering Stabilizer Axle Side Relocation Mount that places the steering stabilizer up and out of harms way and a specifically valved RockSport RED steering Dampener. This system is simple to install and uses the existing factory holes for a bolt-on application.\u003c\/p\u003e\n\n\u003cp\u003eThe RockSport RED steering stabilizer\/damper has increased compression and extension damping performance over the original equipment.\u003c\/p\u003e\n\n\u003cp\u003eThis improved performance will assist in the overall ride and control of your Jeep.\u003c\/p\u003e\n\n\u003cp\u003eNote: The RockSport RED steering stabilizer kit works with Left Hand Drive applications only.\u003c\/p\u003e\n\n\u003cp\u003eNote: Raised steering stabilizer requires at least 2” of bump stop to clear frame.\u003cbr\u003e\n \u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579559006385,"sku":"7133","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/cr4ef9vlixemo5ajs5fp.jpg?v=1768083722"},{"product_id":"7243-metalcloak-hd-drag-link","title":"MetalCloak HD Drag Link - 7243","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 3-5 Days\u003c\/p\u003e\n\u003cp\u003eHD Game Changing Drag Link for the Jeep JK Wrangler is manufactured of strong Tubular Alloy Steel providing unprecedented strength and is fitted with MetalCloak's oversized anti-flop 1-ton rod ends.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.375 OD .375 Wall DOM High Clearance Engineered\u003c\/li\u003e\n\u003cli\u003eGold Zinc Chromate Plating\u003c\/li\u003e\n\u003cli\u003eHi-Misalignment 1-Ton Rod Ends\u003c\/li\u003e\n\u003cli\u003eOE Taper Pin and lock nut for Exact Fitment\u003c\/li\u003e\n\u003cli\u003eDesign limits misalignment to control Drag Link flop\u003c\/li\u003e\n\u003cli\u003eSealed with Durable rubber grease boots\u003c\/li\u003e\n\u003cli\u003eZerk fitting on ends for ease of service\u003c\/li\u003e\n\u003cli\u003eClears Aftermarket Diff Covers\u003c\/li\u003e\n\u003cli\u003eAdjustable on the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe high clearance bends of the strong 1.375 OD tubing is engineered for up and down travel providing the needed space for aftermarket axles and differential covers and is coated with gold zinc chromate for a long lasting finish.\u003cbr\u003e\n\u003cbr\u003e\nFactory like fitment with OE taper pin and lock nut are found with the Dual 1-ton forged and heat treated Rod-Ends. They have extra strength right where it is needed and are designed to control directional misalignment to prevent Drag Link flop. Sealed with Durable rubber grease boots the ends are easily serviceable via zerk fittings.\u003cbr\u003e\n\u003cbr\u003e\nThe assembly is easily adjusted while mounted on the vehicle for fine tuning of axle placement.\u003cbr\u003e\n\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreaseable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113206395057,"sku":"7243","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/iqzixivxdsmo35h6tfaz.jpg?v=1793251774"},{"product_id":"7432f-metalcloack-front-5-5in-6pak-black-shocks-pair","title":"MetalCloak Front 5.5in 6Pak BLACK Shocks - Pair - 7432F","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Lead times may vary for this product\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak 6Pak™ BLACK Shock (Patented) is the first and only shock engineered to deliver maximum travel in the shortest compressed length possible. Designed specifically for the front of the Jeep JK Wrangler with a 5.5\" lift, this revolutionary shock gives your Jeep more articulation than any conventional shock while maintaining ride comfort and control on any terrain. The 6Pak™ shock allows your suspension to reach its full potential, delivering stability, performance, and confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor JK Wrangler\u003c\/li\u003e\n\u003cli\u003e5\/8” Shaft Size\u003c\/li\u003e\n\u003cli\u003eGold Titanium Nitride Coated Shafts\u003c\/li\u003e\n\u003cli\u003eRebuildable, Precision Machined Billet Rod Ends\u003c\/li\u003e\n\u003cli\u003eBillet Cap Ends for a Clean \u0026amp; Finished Look\u003c\/li\u003e\n\u003cli\u003eMore Durable Main Seal Material for Longer Life\u003c\/li\u003e\n\u003cli\u003eStroke: 14”\u003c\/li\u003e\n\u003cli\u003eCompressed Size Eye to Eye: 14 ¼”\u003c\/li\u003e\n\u003cli\u003eExtended Length Eye to Eye: 28 ¼”\u003c\/li\u003e\n\u003cli\u003ePrecision Tuned Valving\u003c\/li\u003e\n\u003cli\u003eDual Opposing Nitrogen Charged Reservoirs\u003c\/li\u003e\n\u003cli\u003eImprove Wheel Travel and Ride Quality\u003c\/li\u003e\n\u003cli\u003eUpper Front 6Pak BLACK Shock Brackets\u003c\/li\u003e\n\u003cli\u003eGold Zinc Shock Mounts\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 6Pak Floating Shock Body Technology provides a game-changing platform featuring parallel shafts extending from the 6 tube floating body. The shock is centralized with dual opposed, nitrogen charged reservoirs that give additional cooling capacity along with up to 15 inches of travel.\u003cbr\u003e\n\u003cbr\u003e\nThe 6Pak™ features a robust 5\/8” shaft designed for strength and stability under extreme use. This larger shaft size resists bending and flexing, ensuring consistent performance no matter how hard you push your suspension.\u003cbr\u003e\n\u003cbr\u003e\nEach shaft has Gold Titanium Nitride coating providing a slick, low-friction surface that resists wear, reduces constriction, and extends the life of the shock. The precision machined billet rod ends are completely rebuildable, giving you the ability to service your shocks and keep them performing. The billet cap ends add a refined, finished look while maintaining the strength and integrity of the shock assembly.\u003cbr\u003e\n\u003cbr\u003e\nThe engineered main seal material increases durability and longevity, standing up to the elements and heavy use for reliable performance. Combined with its patented design, which delivers more travel in a shorter package, the 6Pak™ maximizes suspension articulation while preserving up-travel. Precision tuned valving balances daily driving comfort with confident control on technical trails.\u003cbr\u003e\n\u003cbr\u003e\nThe upper shock mount brackets are constructed from heavy duty 3\/16” steel and mounts directly in the factory locations for a true bolt-on installation. The design also accommodates a 15\" shock, delivering increased travel capability and improved off-road control without requiring major modifications. The shock mounts comes with lower shock mounting spacers to ensure proper alignment and secure positioning. A durable gold zinc plated finish provides corrosion resistance and lasting protection against harsh trail environments.\u003cbr\u003e\n\u003cbr\u003e\nMade in the USA signifies MetalCloak’s commitment to quality and precision manufacturing. Each component is designed, tested, and produced with attention to performance and fitment standards demanded by off-road enthusiasts.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Length:\u003c\/strong\u003e 14.25in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 28.25in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 5.5in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113207836849,"sku":"7432F","price":1419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/v17rvvwkyjodiptwxi84.jpg?v=1793251778"},{"product_id":"7222-metalcloak-chromoly-dog-legged-tie-rod","title":"MetalCloak Chromoly Dog-Legged Tie Rod - 7222","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2 Weeks\u003c\/p\u003e\n\u003cp\u003eThe Chromoly Dog-Legged Tie Rod for the JK Jeep Wrangler is added strength to replace the vulnerable stock tie rod.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTubular 1.625”OD .375” wall ID 4130 Chromoly CDS\u003c\/li\u003e\n\u003cli\u003eGold zinc chromate finish\u003c\/li\u003e\n\u003cli\u003e1-Ton forged heat treated off set dog leg rod ends\u003c\/li\u003e\n\u003cli\u003eRod end design controls tie rod flop\u003c\/li\u003e\n\u003cli\u003eOE taper pin and lock nut for exact fitment\u003c\/li\u003e\n\u003cli\u003eSealed with durable rubber grease boots\u003c\/li\u003e\n\u003cli\u003eAdjustable while installed\u003c\/li\u003e\n\u003cli\u003eIncludes HD steering stabilizer bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eExclusive to MetalCloak, this tie rod comes with dual 1-ton forged and heat treated 1\" Dog-Leg Rod-Ends. they have strength and provides the needed clearance for stock or aftermarket wheels and provides full turning radius. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.\u003cbr\u003e\n\u003cbr\u003e\nThe heavy duty 3\/16\" hot rolled steel plate adjustable steering stabilizer mounting bracket installs onto the tie-rod and re-positions the stabilizer up and out of harms way; the mount is designed for aftermarket steering stabilizers.\u003cbr\u003e\n\u003cbr\u003e\nThe optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved \"M\" around the recessed bolt holes for a clean and custom look.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Does NOT work with stock wheel backspacing.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreaseable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 4130 Chromoly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.625in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113208393905,"sku":"7222","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ionztrqmrpykdfthnsei.jpg?v=1793251779"},{"product_id":"7021-metalcloak-6pak-front-shock-mount-kit","title":"MetalCloak 6Pak Front Shock Mount Kit - 7021","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak 6Pak Front Shock Mount Kit, for the Jeep JK Wrangler, is an effective and simple bolt-on component that allows you to mount the revolutionary Long-Travel 6Pak Shocks into the stock shock towers of your Jeep.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger 3\/16\" Steel Upper Shock Mount Brackets\u003c\/li\u003e\n\u003cli\u003eLower Shock Mount Spacers\u003c\/li\u003e\n\u003cli\u003eGold Zinc Plated Protection\u003c\/li\u003e\n\u003cli\u003eBrake Line Bracket Relocation Bolts\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNever before was it possible to \"BOLT ON\" 15in travel shocks until now; 6Pak shocks changed it all. The Shock mount kit provides the additional clearance needed to position up to 15\" travel 6Pak shocks into your Jeep with ease. Simply bolt in the strong 3\/16\" hot rolled steel plate brackets into the factory location and install the shocks.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3\/16in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113209049265,"sku":"7021","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ode4egxrygpmxrtozihe.jpg?v=1793251781"},{"product_id":"7010-metalcloak-track-bar-rear","title":"MetalCloak Track Bar Rear - 7010","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe Metalcloak Solid Chromoly Adjustable Rear Track Bar is a great replacement for your vehicle when it comes to restoring the roll center geometry of your vehicle. This has been designed to be high clearance, and had been designed to work with large down-travel, as well as large up-travel operation. \u003c\/p\u003e\n\u003cp\u003eAlthough adjustable it can work with your factory track bar bracket with minor modification. However this will work best with Metalcloak JK Rear Track Bar Mounting Kit.\u003c\/p\u003e\n\u003cp\u003eThis trackbar has been fabricated from 1 ¼” solid chromoly to provide the ultimate strength for your vehicle. This has also been designed to fit around the factory exhaust system, and it will work with factory, or after aftermarket differentials. \u003c\/p\u003e\n\u003cp\u003eIncluded in this kit are the following:\u003cbr\u003e\n•    Adjustable Gold Zinc Rear Track Bar\u003cbr\u003e\n•    Custom Rod End Joint\u003cbr\u003e\n•    Zinc Lock Nut\u003cbr\u003e\n•    Modified OEM Style Bushings\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.25in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113210392753,"sku":"7010","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc7010_1_ee7c4243-a34c-4db4-b9f4-df300d1d7ba7.jpg?v=1793251785"},{"product_id":"7016-metalcloak-track-bar-front","title":"MetalCloak Track Bar Front - 7016","description":"\u003cp\u003eThe Metalcloak Front Track Bar has been crafted from Solid Chromoly providing unprecedented strength and ride stability to provide the driver with an overall better handling vehicle.  This Track Bar has been designed to give you the highest clearance as possible, and engineered for large down travel, as well as up travel.\u003c\/p\u003e\n\u003cp\u003eThis Track Bar works with the 6Pak Shock System, and will work with both factory, and aftermarket differentials. For protection against harmful elements, the Metalcloak Track Bar has been gold zinc plated, and employs enhanced Durotrack bushings.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113210425521,"sku":"7016","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc7016_1.jpg?v=1793251786"},{"product_id":"7012-metalcloak-track-bar-mount-rear","title":"MetalCloak Track Bar Mount Rear - 7012","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak JK Wrangler Rear Track Bar Mounting Kit is precision engineered for massive up and down travel without interference with the frame. For use with the MetalCloak high clearance adjustable rear track bar or can be used with a stock track bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD Formed 3\/16\" Hot Rolled Steel Plate\u003c\/li\u003e\n\u003cli\u003eEasy Bolt-On Bracket (No Welding)\u003c\/li\u003e\n\u003cli\u003eDesigned for Massive Up-Travel \u0026amp; Down-Travel\u003c\/li\u003e\n\u003cli\u003eNo Frame Interference\u003c\/li\u003e\n\u003cli\u003eGold Zinc Chromate Plate\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInnovative design simply bolts into place and corrects track bar geometry for lifted JK Jeep Wranglers. 3\/16\" hot rolled steel plate insures strength to keep you on track. When using MetalCloak's Adjustable Rear Track Bar get interference free up AND down travel.\u003cbr\u003e\n\u003cbr\u003e\nFor use with the MetalCloak JK Adjustable Rear Durotrak Track Bar or Rear Stock Track Bar.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts To:\u003c\/strong\u003e OEM Mounting Holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\/4in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Style:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48113211801777,"sku":"7012","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc7012_1_aa533fa1-171c-459d-9959-e3ab24ca82af.jpg?v=1793251793"},{"product_id":"7080-metalcloak-steering-stabilizer-axle-side-mount","title":"MetalCloak Steering Stabilizer - Axle Side Mount, JK Wrangler - 7080","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe JK Wrangler Jeep Steering Stabilizer Axle Side Mount; This bracket relocates the axle side mount to fit an upgraded steering stabilizer and adds clearance, moving the stabilizer up and out of harms way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/16\" Steel Plate Axle Side Stabilizer Relocation Bracket\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eMounts in Factory Holes\u003c\/li\u003e\n\u003c\/ul\u003e\nThe MetalCloak Steering Stabilizer Axle Mount is for aftermarket steering stabilizer and is simple to install using existing factory holes for a quick bolt-on application.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e The MetalCloak Steering Stabilizer Axle Mount is for aftermarket steering stabilizers.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Raised steering stabilizer requires at least 2” of bump stop to clear frame.\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Hardware:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3\/16in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stabilizer Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48115940327601,"sku":"7080","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/cl5avm9ckxg3rle8dn9o.jpg?v=1793279913"},{"product_id":"mtc1101-metal-cloak-extended-replacement-brake-lines","title":"MetalCloak Extended Replacement Brake Lines - 1101","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eReplacement Brake Lines (24.5\") are made of the highest quality materials easily becoming the most durable and best performing available in the automotive aftermarket industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDOT Approved\u003c\/li\u003e\n\u003cli\u003eExtended Length (24.5\")\u003c\/li\u003e\n\u003cli\u003eThree Layer Stainless Steel Braided Wire\u003c\/li\u003e\n\u003cli\u003eKevlar Reinforced Teflon Inner Core\u003c\/li\u003e\n\u003cli\u003eRed-Tinted Poly Safety Coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGet the extra length required for your brake lines when lifting your Jeep. Don’t risk pulling a brake line apart because it is too short; causing a brake failure. The DOT approved, extended length brake lines provide 3 layers of strength ensuring durability and that you have the stopping performance you demand for your Jeep Wrangler.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote: \u003c\/strong\u003eMetalCloak recommends that a certified automotive mechanic perform the installation if you are not experienced\/proficient with this task.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Height Range:\u003c\/strong\u003e 3.5in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front or Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48115953205425,"sku":"1101","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtc1101_1.jpg?v=1793279964"},{"product_id":"1710-metal-cloak-front-hydrastrike-hydraulic-bump-stops","title":"MetalCloak Front HydraStrike Hydraulic Bump Stops - 1710","description":"\u003cp\u003eThe HydraStrike Nitrogen Charged Hydraulic Bumps are engineered to deliver controlled, repetitive bottom-out performance for aggressive off-road use without compromise. Designed specifically for the front upper bump location on Jeep JK\/JL Wranglers and JT Gladiators. MetalCloak HydraStrike focuses on performance, durability, compatibility, and consistent damping when it matters most.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with JK\/JL Wranglers \u0026amp; JT Gladiators\u003c\/li\u003e\n\u003cli\u003eHydraulic Nitrogen Charged, Oil Dampened Bump Stops\u003c\/li\u003e\n\u003cli\u003eMade of .125” Wall Tube Shaft For Increased Strength\u003c\/li\u003e\n\u003cli\u003eDisogrin Seals For Superior Sealing Performance \u0026amp; Wear Resistance\u003c\/li\u003e\n\u003cli\u003e5\/8” Wide PTFE Lined Shaft Bearing\u003c\/li\u003e\n\u003cli\u003eBody Threads Match the Fox Weld-In Mounts for Compatibility\u003c\/li\u003e\n\u003cli\u003eInternal Reservoir Design\u003c\/li\u003e\n\u003cli\u003eNo Warm-Up Required\u003c\/li\u003e\n\u003cli\u003eDelrin Strike Pad\u003c\/li\u003e\n\u003cli\u003eReduced Noise \u0026amp; Softer Impact Feel\u003c\/li\u003e\n\u003cli\u003eQuick and Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike emulsion style bumps that require heat buildup before they function properly, the HydraStrike piston design with internal reservoir delivers consistent damping performance from the very first hit. Whether dropping off an obstacle or absorbing repeated high-speed hits, HydraStrike maintains predictable control from the first impact. The HydraStrike Disogrin seals are used to deliver exceptional sealing performance and long-term wear resistance in harsh off-road environments. These oversized industry leading seals provide a larger contact surface that better resists contamination, reduces leakage, and maintains consistent damping performance over time. Providing a hydraulic bump that stays smooth, reliable, and serviceable even after repeated harsh impacts.\u003c\/p\u003e\n\u003cp\u003eThe massive 5\/8” wide Polytetrafluoroethylene (PTFE) lined shaft bearing is built into the HydraStrike to better distribute side loads and reduce friction under compression. This wider bearing improves stability during angled or high-speed impacts, minimizing shaft deflection and premature wear. The PTFE lining ensures smooth operation without binding, all while extending the service life in demanding off-road conditions.\u003c\/p\u003e\n\u003cp\u003eThe HydraStrike body threads allow direct compatibility with existing Fox weld-in mounts allowing upgrading simple for users already running Fox hardware, eliminating the need for cutting, re-welding, or replacing mounts. It provides a true bolt-in performance upgrade path that saves time and money. Each HydraStrike includes a Delrin strike pad to refine impact feel and reduce noise at full compression. This design softens harsh bottom outs while maintaining durability, making it ideal for daily drivers and trail rigs.\u003c\/p\u003e\n\u003cp\u003eHydraStrike is built around a .125” wall tube shaft, providing a substantial strength advantage over the thinner .085” wall designs. This thicker shaft improves resistance to bending and deformation under extreme loads, increasing durability during hard impacts and aggressive driving. Giving you the confidence to push your suspension to its limits.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBump Stop Travel:\u003c\/strong\u003e 2in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeves Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JT\/JL\/JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48116315062449,"sku":"1710","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MTC1710.jpg?v=1793282636"},{"product_id":"7701-metalcloak-grade-8-suspension-hardware-upgrade-kit","title":"MetalCloak Grade-8 Suspension Hardware Upgrade Kit - 7701","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak's Jeep JK Wrangler Full Replacement Suspension Hardware Kit is an 82-piece kit that features replacement hardware for all Control Arms, Front\/Rear Track Bars and Lower Shock Mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl Arm Hardware\u003c\/li\u003e\n\u003cli\u003eGrade 8 Bolts (14)\u003c\/li\u003e\n\u003cli\u003eWashers (22)\u003c\/li\u003e\n\u003cli\u003eNuts (8)\u003c\/li\u003e\n\u003cli\u003eFlag Nuts (6)\u003c\/li\u003e\n\u003cli\u003eTrack Bar Hardware\u003c\/li\u003e\n\u003cli\u003eGrade 8 Bolts (4)\u003c\/li\u003e\n\u003cli\u003eWashers (8)\u003c\/li\u003e\n\u003cli\u003eNuts (4)\u003c\/li\u003e\n\u003cli\u003eShock Mount Hardware\u003c\/li\u003e\n\u003cli\u003eGrade 8 Bolts (4)\u003c\/li\u003e\n\u003cli\u003eWashers (8)\u003c\/li\u003e\n\u003cli\u003eNuts (4)\u003c\/li\u003e\n\u003cli\u003eGold Zinc Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull Replacement Suspension Hardware Kit from MetalCloak is what you need to replace your worn-out fasteners. MetalCloak's Patented Duroflex Control Arms do not put the stresses on stock hardware like typical suspension kits do, so it is possible to re-use all your stock hardware. If your JK is old, worn out, or mother nature has played havoc with your stock hardware, this kit is your ultimate solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis hardware kit will \u003cstrong\u003eNOT\u003c\/strong\u003e work with stock components.\u003c\/li\u003e\n\u003cli\u003eThis item is considered a builder part, and as such there are no instructions for the use of these products; if using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk.\u003c\/li\u003e\n\u003cli\u003eMetalCloak recommends you have a suspension specialist align your truck once MetalCloak suspension is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-Year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48116388692145,"sku":"7701","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MTC7701.jpg?v=1793283222"},{"product_id":"metalcloak-led-taillight-kit-lo-profile-aluminum-housing-jk-wrangler","title":"MetalCloak LED Taillight Kit, Lo-Profile Aluminum Housing | JK Wrangler - 3432","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 3-5 Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak Lo-Profile Rear LED Light Kit is the BEST LED system for the Jeep JK Wrangler. The light kit works as a replacement for the stock Taillights or as part of MetalCloak’s ExoCorner LED Kit.\n\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003e6061 T6 Aluminum LED Lo-Profile Housings\u003c\/li\u003e\n\u003cli\u003eHi-Visibility LED Taillight Replacements\u003c\/li\u003e\t\n\u003cli\u003eLo-Profile for Optimal Clearance\u003c\/li\u003e\t\n\u003cli\u003eWater Resistant Elastomer Gaskets\u003c\/li\u003e\n\u003cli\u003eLED Resistors\u003c\/li\u003e\t\t\n\u003cli\u003eType III Anodized Black Aluminum Finish\u003c\/li\u003e\t\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eHousing Made in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nThe rear LED light kit housing is made of T6 aircraft grade aluminum and can be used with \n    \u003cspan\u003eor without the ExoCorner’s. These bolt directly into the stock locations and do not require any body modifications. The housings are finished in black anodized to keep em looking good.\n\u003cbr\u003e \n\u003cbr\u003e \nAluminum housings are sealed with  water resistant elastomer gaskets that incorporate the  low profile led replacement taillights for a truly custom upgrade. The hi-visibility led lights are much brighter than the dim factory taillights and are SAE\/DOT compliant and wire directly into place.\n\u003cbr\u003e \n\u003cbr\u003e \t\nThe entire assembly provides a much slimmer profile that is great when off-road and ensures you have maximized your clearance from trail obstacles.\n\u003cbr\u003e \n\u003cbr\u003e \nThe Rear LED Light Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard\/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.\n\u003cbr\u003e \n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe rear led light kit does not come in raw metal.\u003c\/em\u003e\n\u003cbr\u003e \n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\t\t\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124807610545,"sku":"3432","price":354.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3432_1.jpg?v=1793424716"},{"product_id":"metalcloak-overland-flip-step-pair-jk-jl-2-door","title":"MetalCloak Overland Flip Step, Pair, JK\/JL, 2-Door","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Raw Metal Currently Shipping in 1-2 Weeks ; Black Powder Coat Currently Shipping in 3-5 Weeks\u003c\/p\u003e\n\u003cp\u003eAdd protection and functionality to your JK \u0026amp; JL Wrangler 2-Door with MetalCloak's Overland 2-Door Rocker Flip Steps.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler 2-Door \u0026amp; 2018+ JL Wrangler 2-Door\u003c\/li\u003e\n\u003cli\u003eMounts to MetalCloak Overland Rocker Base\u003c\/li\u003e\n\u003cli\u003e1\/8\" Cold-Rolled Steel Plate\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x .120\" Wall Steel Tubing\u003c\/li\u003e\n\u003cli\u003eMultiple Step Configurations\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003cli\u003eChoice of Raw or MetalCloak's Signature Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe flip step is made of 1.5\" OD x .120\" Wall Steel Tubing and is reinforced with thick \n    \u003cspan\u003e1\/8\" steel plate, providing strong protection for your Jeep. The Overland Rocker Flip Step requires no body modifications, cutting, or welding and bolts directly to the MetalCloak Overland Rocker Base.\n\u003cbr\u003e\n\u003cbr\u003e\nThe flip step can be mounted in multiple configurations, creating an easy high-clearance step or a low-profile deflection rub rail.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eTEST FIT THE METALCLOAK PRODUCT PRIOR TO CUSTOM PAINTING OR POWDER COATING. MetalCloak is not responsible for the cost of ANY custom finishes that have been applied.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThis step requires the MetalCloak JK Wrangler or JL Wrangler Overland Rocker Base and only mounts onto the Overland Rocker Base.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThis system is available in raw steel or MetalCloak's signature Black Powder Coat.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Raw Metal","offer_id":48124807708849,"sku":"3322","price":369.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat","offer_id":48124807741617,"sku":"3322-BPC","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3322_1.jpg?v=1793424739"},{"product_id":"metalcloak-rocksport-black-2-5-3-5-jk-wrangler-reservoir-long-travel-shocks-adjustable-front-pair","title":"MetalCloak RockSport BLACK 2.5\"\/3.5\" JK Wrangler Reservoir Long Travel Shocks, Adjustable, Front, Pair","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Shipping Within 1 Week\u003c\/p\u003e\n\u003cp\u003eRockSport Black Reservoir Shocks are custom engineered, meticulously designed and precision manufactured in-house here at MetalCloak. These aluminum-bodied 2.5\" reservoir shocks have 8 precision compression settings that allow you to tune specifically to meet your Gold standard.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler \u0026amp; Wrangler Unlimited (Front Pair)\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III HARD Anodized Black Infinity Finish\u003c\/li\u003e\n\u003cli\u003eEasy Setting Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e2-1\/2\" Diameter Aluminum Body\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty 3\/16\" Wall Thickness\u003c\/li\u003e\n\u003cli\u003eOversized For Maximum Cooling\u003c\/li\u003e\n\u003cli\u003eRubber Covered Stainless Steel Braided Hydraulic Hose\u003c\/li\u003e\n\u003cli\u003eBuilt-In Stand-Offs For OE-Quality Fitment\u003c\/li\u003e\n\u003cli\u003eHuge Oversized 7\/8\" Shafts\u003c\/li\u003e\n\u003cli\u003eShafts Have Induction-Hardened Surface\u003c\/li\u003e\n\u003cli\u003eShafts Are Hard Chrome Plated\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III Clear HARD Anodized Shock Piston\u003c\/li\u003e\n\u003cli\u003eParabolic Valve Stack \u003cem\u003e(Patent Pending #63\/743,954)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\nThe RockSport Remote Reservoir Black shocks are specifically made to work with \n    \u003cspan\u003eMetalCloak True Dual Rate Coils; the digressive valving provides the best of slow and fast speed performance.\n\u003cbr\u003e\n\u003cbr\u003e\nShocks are made with 2.5\" diameter, 3\/16\" thick-wall aluminum with a huge interior for fluid to ensure they stay cool and hold up to on- and off-road abuse.\n\u003cbr\u003e\n\u003cbr\u003e\nThe remote reservoir connects to the shock with a 3000psi high working pressure, stainless-steel braided, synthetic lined reservoir hose, with optimized flow orifices to allow unhindered shock oil flow.\n\u003cbr\u003e\n\u003cbr\u003e\nUnique valve stack with parabolic shim-form \u003cem\u003e(Patent Pending #63\/743,954)\u003c\/em\u003e provides a compact and simplified valve assembly that eliminates shim stack problems of conventional methods, allowing for our exacting target numbers to be achieved.\n\u003cbr\u003e\n\u003cbr\u003e\nOur completed package allows for maximum shaft length to be utilized and provides more travel than any similar size Monotube shock; even the internals of the end caps are machined out for additional travel.\n\u003cbr\u003e\n\u003cbr\u003e\nFunctional Type III Mil-Spec clear HARD anodized process is used on the shock piston to keep the assembly from wearing down from the high-velocity fluid transfer, ensuring a long-lasting service life.\n\u003cbr\u003e\n\u003cbr\u003e\nOversized 7\/8\" hard chrome plated shafts, induction hardened to Rockwell C 60+, exceeding most competitors in durability and can take a beating over and over providing the BEST protection from rock debris; this allows a consistently smooth surface for seals and wiper to ride on.\n\u003cbr\u003e\n\u003cbr\u003e\nA triple seal pack keeps shock oil in and contaminants out. Removable Bump Cap protects the seal assembly from full compression damage and provides access for servicing the shock.\n\u003cbr\u003e\n\u003cbr\u003e\nLarge, easy-to-grip billet knob with laser-marked numbers allow you to change the compression setting simply; choose from 8 settings that add an additional 15% compression force at each click to tune in your Gold Standard. Dial in your off-road comfort along with great daily driving performance.\n\u003cbr\u003e\n\u003cbr\u003e\nRockSport Black Reservoir Shocks provide a high-end shock with adjustable compression settings allowing you to dial in your Jeep's ride for fantastic performance with a comfortable yet stable compression and rebound cycle for Rock Crawling, Overlanding, Daily Driving or \"spirited\" off-road navigation \u003cem\u003e(wink)\u003c\/em\u003e.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eRockSport Black Shocks are 2.5\" diameter LARGE-BODIED long-travel shocks. These ARE a direct fitment with the model specific brackets for JK Wrangler. All 2.5\" diameter shocks will require model specific consideration for \"proper\" fitment; additional bump stops, properly back spaced wheels, brake caliper clearance, etc... If you are unsure of how to check for fitment please give us a call.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eWe recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"I have a factory axle (no extra parts)","offer_id":48124808495281,"sku":"1611-1","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"I have an aftermarket axle, please send weld on shock bracket (7194)","offer_id":48124808528049,"sku":"1611-2","price":1563.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1611_1.jpg?v=1793424740"},{"product_id":"metalcloak-rocksport-red-long-er-travel-shock-jk-wrangler-rear-pair","title":"MetalCloak RockSport RED Long(er) Travel Shock, JK Wrangler, Rear, Pair - 1019","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJK Wrangler RockSport RED Longer Travel Shocks with Relocation Brackets are custom-designed and distributed only by MetalCloak. This trail-proven, twin-tube shock kit has proprietary valving tuned specifically to MetalCloak's exacting standards and strong 3\/16\" steel plate bolt-on relocation brackets to maximize usable shock travel and improve ground clearance.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler \u0026amp; Wrangler Unlimited (Rear Pair)\u003c\/li\u003e\n\u003cli\u003eOversized 18mm Chrome Shafts\u003c\/li\u003e\n\u003cli\u003eDouble-Welded Bushing Eyes\u003c\/li\u003e\n\u003cli\u003eNatural Rubber Mount Bushings\u003c\/li\u003e\n\u003cli\u003eNitrogen Gas Charged to Resist Fading\u003c\/li\u003e\n\u003cli\u003eProtected With Shaft-Length Stone Guard\u003c\/li\u003e\n\u003cli\u003eCNC Formed, CAD Designed 3\/16\" Bolt-On Lower Relocation Brackets\u003c\/li\u003e\n\u003cli\u003eGold Zinc Protection on Bracket\u003c\/li\u003e\n\u003cli\u003eAll Needed Hardware\u003c\/li\u003e\n\u003cli\u003eIncreased Ground Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\nRockSport RED Long Travel Shocks have been engineered to work in \n    \u003cspan\u003eunison with MetalCloak's True Dual Rate Coils. Properly valved and tested by the engineers at MetalCloak, RockSport shocks provide a fantastic ride on- and off-road with a comfortable yet stable compression and rebound cycle with lots of travel. Maximize RockSport travel with the durable 3\/16\" hot-rolled steel plate shock relocation brackets that provide more clearance and better use of shock travel.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eWe recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe RockSport RED Shocks WILL NOT fit a Jeep with no lift.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124809052337,"sku":"1019","price":247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1019_1.jpg?v=1793424823"},{"product_id":"metalcloak-rocksport-red-long-er-travel-shocks-jk-wrangler-front-pair","title":"MetalCloak RockSport RED Long(er) Travel Shocks, JK Wrangler, Front, Pair - 1018","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJK Wrangler RockSport RED Long Travel Shocks are custom-designed and distributed only by MetalCloak. These trail-proven, twin-tube shocks have proprietary valving tuned specifically to MetalCloak's exacting standards.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler \u0026amp; Wrangler Unlimited (Front Pair)\u003c\/li\u003e\n\u003cli\u003eOversized 18mm Chrome Shafts\u003c\/li\u003e\n\u003cli\u003eDouble-Welded Bushing Eyes\u003c\/li\u003e\n\u003cli\u003eNatural Rubber Mount Bushings\u003c\/li\u003e\n\u003cli\u003eNitrogen Gas Charged to Resist Fading\u003c\/li\u003e\n\u003cli\u003eProtected With Shaft-Length Stone Guard\u003c\/li\u003e\n\u003c\/ul\u003e\nRockSport RED Long Travel Shocks have been engineered to \n    \u003cspan\u003ework in unison with MetalCloak's True Dual Rate Coils. Properly valved and tested by the engineers at MetalCloak, RockSport shocks provide a fantastic ride on- and off-road with a comfortable yet stable compression and rebound cycle with lots of travel.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eWe recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe RockSport RED Shocks WILL NOT fit a Jeep with no lift.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124809150641,"sku":"1018","price":178.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1018_1.jpg?v=1793424824"},{"product_id":"metalcloak-jk-wrangler-replacement-brake-lines-pair-26-5","title":"MetalCloak JK Wrangler Replacement Brake Lines, Pair 26.5\" - 1106","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eReplacement Brake Lines (26.5\") are made of the highest quality materials easily becoming the most durable and best performing available in the automotive aftermarket industry.\n\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eDOT Approved\u003c\/li\u003e\n\u003cli\u003eExtended Length (26.5\")\u003c\/li\u003e\n\u003cli\u003eThree Layer Stainless Steel Braided Wire\u003c\/li\u003e\n\u003cli\u003eKevlar Reinforced Teflon Inner Core\u003c\/li\u003e\n\u003cli\u003eRed-Tinted Poly Safety Coat\u003c\/li\u003e\n\u003c\/ul\u003e\nGet the extra length required for \n    \u003cspan\u003eyour brake lines when lifting your Jeep. Don’t risk pulling a brake line apart because it is too short; causing a brake failure. The DOT approved, extended length brake lines provide 3 layers of strength ensuring durability and that you have the stopping performance you demand for your Jeep Wrangler.\n\u003cbr\u003e \u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eMetalCloak recommends that a certified automotive mechanic perform the installation if you are not experienced\/proficient with this task. \u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124809281713,"sku":"1106","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1106_1.jpg?v=1793424827"},{"product_id":"metalcloak-universal-front-license-plate-adapter-cj-yj-tj-lj-jk-jl-jt","title":"MetalCloak Universal Front License Plate Adapter, CJ\/YJ\/TJ\/LJ\/JK\/JL\/JT - 2180","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping Within 1 Week\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak License Plate Adapter features a quick-release design and is perfect for mounting your license plate to the Frame-Built Bumper.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Front Bumper\u003c\/li\u003e\n\u003cli\u003eStainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware\u003c\/li\u003e\n\u003cli\u003eQuick-Release Knobs\u003c\/li\u003e\n\u003cli\u003eRivet Nuts\u003c\/li\u003e\n\u003cli\u003eRivet Nut Install Tool\u003c\/li\u003e\n\u003cli\u003eEasy to Install\u003c\/li\u003e\n\u003c\/ul\u003e\nMount your license plate to your front bumper with the quick-release knobs to keep from damaging the \n    \u003cspan\u003eplate when off-roading or use security bolts for a more permanent solution. This is a simple and effective way to attach your plate to the MetalCloak front bumper.\n\u003cbr\u003e\n\u003cbr\u003e\nStainless steel brackets and hardware, along with quick-release knobs, are included. The system mounts with the provided rivet nuts and rivet nut installation tool.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eMetalCloak's license plate adapter will work with either MetalCloak's roller or billet fairlead.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124809576625,"sku":"2180","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/2180_1.jpg?v=1793424851"},{"product_id":"metalcloak-low-profile-led-marker-lights-jk","title":"MetalCloak Low Profile LED Marker Lights, JK - 2208-JK","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 3-5 Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak Low Profile LED Marker lights are a 3\/4\" round, Waterproof Amber LED for the Jeep JK Wrangler.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eFits JK Overline, Overland, \u0026amp; Hardline Fenders\u003c\/li\u003e\n\u003cli\u003eAmber LEDs With Clear Lens\u003c\/li\u003e\t\t\n\u003cli\u003eSealed Waterproof Construction\u003c\/li\u003e\t\n\u003cli\u003eBlack Elastomer Grommet\u003c\/li\u003e\n\u003cli\u003eTwo Wire Pigtail Design\u003c\/li\u003e\t\n\u003cli\u003eButt Connectors\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\nThe low profile LED marker lights produce a smooth bright circle of \n    \u003cspan\u003eamber light and works as a running light as well as a blinker. The 3\/4” round, 12v bulbs are recessed with a provided black elastomer grommet allowing the LEDs to fit snug in the MetalCloak fenders. \n\u003cbr\u003e\n\u003cbr\u003e \n\u003c\/span\u003e\n\u003cbr\u003e\t\t\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124809937073,"sku":"2208-JK","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/2208-JK_1.jpg?v=1793424863"},{"product_id":"metalcloak-no-winch-cover-plate-jk-wrangler-jl-wrangler-jt-gladiator","title":"MetalCloak No-Winch Cover Plate, JK Wrangler | JL Wrangler | JT Gladiator - 3102","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 1 Week\u003c\/p\u003e\n\u003cp\u003eThe No-Winch Cover Plate for the Jeep JK\/JL Wrangler and JT Gladiator is designed to create a clean, completed look when choosing not to add a winch to your bumper build.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Combo Bumper Base\u003c\/li\u003e\n\u003cli\u003eMade of 1\/8\" Hot-Rolled Steel\u003c\/li\u003e\n\u003cli\u003eMetalCloak Cutout\u003c\/li\u003e\n\u003cli\u003eBlack Textured Powder Coat\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe No-Winch Cover Plate fits over the winch opening in the MetalCloak Combo Bumper Base, giving it \n    \u003cspan\u003ea sleek look. The plate is made of strong 1\/8\" hot-rolled steel and is finished in MetalCloak's signature Black Powder Coat to protect against the elements when out on the trail.\n\u003cbr\u003e\n\u003cbr\u003e\nThe cover plate allows you to choose your end caps, winch guards, stingers or light bars for a fully customized look.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014, MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810625201,"sku":"3102","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3102_1.jpg?v=1793424885"},{"product_id":"metalcloak-jk-combo-bumper-base-skid-plate","title":"MetalCloak JK Combo Bumper Base Skid Plate - 3105","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Ships in 3 to 5 Days\u003c\/p\u003e\n\u003cp\u003eThe Combo Bumper Base Skid Plate for the Jeep JK Wrangler is designed to protect the low hanging factory frame crossbar.\n\u003c\/p\u003e\nFeatures include:\n\u003cul\u003e\n\u003cli\u003eProtects The Factory Frame Crossbar \u003c\/li\u003e\n\u003cli\u003eMade of 1\/8” Hot Rolled Steel\u003c\/li\u003e\n\u003cli\u003eIntegrates With The Combo Bumper Base\u003c\/li\u003e\t\n\u003cli\u003ePremium Black Texture Powder Coating\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware Included\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nThe Skid Plate mounts underneath the combo bumper base and stock brackets to provide \n    \u003cspan\u003ea skid surface to help protect the factory frame crossbar from obstacles that are larger than anticipated. \n\u003cbr\u003e\n\u003cbr\u003e\nThe Skid Plate is made of strong laser-cut 1\/8” hot rolled steel and is finished in MetalCloak’s signature black powder coat to protect against the elements when out on the trail. \n\u003cbr\u003e\n\u003cbr\u003e\nThe Combo Bumper Base Skid Plate is part of the MetalCloak modular bumper system; choose your end caps, winch guards, stingers or light bars for a fully customized look.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014 MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\t\t\n\u003cbr\u003e \n\u003cbr\u003e\t\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810657969,"sku":"3105","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3105_1.jpg?v=1793424886"},{"product_id":"metalcloak-sway-bar-ground-clearance-kit-jk-wrangler-jl-wrangler-jt-gladiator","title":"MetalCloak Sway Bar Ground Clearance Kit JK Wrangler | JL Wrangler | JT Gladiator - 3141","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Ships in 3 to 5 Days\u003c\/p\u003e\n\u003cp\u003eThe Sway Bar Ground Clearance Kit allows Rubicon Jeep JK\/JL Wrangler \u0026amp; JT Gladiator owners to increase the ground clearance of the automatic sway bar.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eFits Rubicon JK\/JL Wrangler \u0026amp; JT Gladiator\u003c\/li\u003e\n\u003cli\u003eAutomatic Sway Bar Compatible\u003c\/li\u003e\t\n\u003cli\u003eIncreased Ground Clearance\u003c\/li\u003e\t\t\n\u003cli\u003eCustom Bolt\u003c\/li\u003e\n\u003cli\u003eCustom Washer\u003c\/li\u003e\t\n\u003cli\u003eBolt Finished in Gold Zinc\u003c\/li\u003e\t\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nThe automatic sway bar hangs low behind the front bumper. Move it up and \n    \u003cspan\u003eout of harms way with the sway bar ground clearance kit. The sway bar ground clearance kit improves the approach angle and provides an additional 1 3\/4\" of clearance.\n\u003cbr\u003e\n\u003cbr\u003e\nFinished in gold zinc for a long lasting finish to protect it against the elements.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014 MetalCloak Updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\t\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810690737,"sku":"3141","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3141_1.jpg?v=1793424887"},{"product_id":"metalcloak-jk-wrangler-12-18-vacuum-pump-relocation-kit","title":"MetalCloak JK Wrangler ('12 - '18) Vacuum Pump Relocation Kit - 3150","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Ships in 3 to 5 Days\u003c\/p\u003e\n\u003cp\u003eThe Vacuum Pump Relocation Kit for the 2012 and later models Jeep JK Wranglers, moves the Vacuum Pump \u003cem\u003e(located by your front frame rail)\u003c\/em\u003e up into the engine compartment.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eFits 2012 - 2018 JK Wranglers\u003c\/li\u003e\t\n\u003cli\u003eRelocates Vacuum Pump\u003c\/li\u003e\n\u003cli\u003e1\/8\" Cad Formed \u0026amp; Laser Cut Bracket\u003c\/li\u003e\n\u003cli\u003eSignature Gold Zinc Finish\u003c\/li\u003e\n\u003cli\u003eMetalCloak \"M\" Branding\u003c\/li\u003e\n\u003cli\u003eFitment Into Factory Mount Locations\u003c\/li\u003e\t\n\u003cli\u003eAll Needed Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nRelocating the vacuum pump is a necessary project to allow fitment of the \n    \u003cspan\u003eMetalCloak \u003ca target=\"_blank\" href=\"http:\/\/www.metalcloak.com\/Jeep-Wrangler-JK-Frame-Built-Bumpers-s\/150.htm\"\u003eJK Frame-Built Bumper System\u003c\/a\u003e or any other bumper that allows your winch to sit low between the frame rails.\n\u003cbr\u003e\n\u003cbr\u003e\t\t\nFinished in our signature gold zinc, the bracket will add long lasting custom looks showing a MetalCloak \"M\" cut-out to let other Jeepers know you support USA made products.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAccording to \"sources\" the reason Jeep moved the canister from the engine compartment down to the frame rails is that it makes a slight pumping sound and they wanted that sound as far away from the driver as possible. Moving the canister does not compromise any of your Jeep's systems.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\t\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810723505,"sku":"3150","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3150_1.jpg?v=1793424888"},{"product_id":"metalcloak-jk-wrangler-12-18-spod-mount-vacuum-pump-relocation-kit","title":"MetalCloak JK Wrangler ('12 - '18) sPod Mount \u0026 Vacuum Pump Relocation Kit - 3151","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Ships in 3 to 5 Days\u003c\/p\u003e\n\u003cp\u003eThe \"sPod\" Mount \u0026amp; Vacuum Pump Relocation for the 2012 and later model JK Jeep Wranglers, moves the vacuum pump \u003cem\u003e(located by your front frame rail)\u003c\/em\u003e up into the engine compartment and provides a mount for the popular sPod wiring system.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eFits 2012 - 2018 JK Wranglers\u003c\/li\u003e\t\n\u003cli\u003eRelocates Vacuum Pump\u003c\/li\u003e\t\n\u003cli\u003eProvides Mounting for sPod Wiring System\u003c\/li\u003e\t\n\u003cli\u003e1\/8\" Cad Formed \u0026amp; Laser Cut Bracket\u003c\/li\u003e\n\u003cli\u003eSignature Gold Zinc Finish\u003c\/li\u003e\n\u003cli\u003eMetalCloak \"M\" Branding\u003c\/li\u003e\n\u003cli\u003eFitment Into Factory Mount Locations\u003c\/li\u003e\t\n\u003cli\u003eAll Needed Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nRelocating the vacuum pump is a necessary project to allow fitment of the \n    \u003cspan\u003eMetalCloak \u003ca target=\"_blank\" href=\"http:\/\/www.metalcloak.com\/Jeep-Wrangler-JK-Frame-Built-Bumpers-s\/150.htm\"\u003eJK Frame-Built Bumper System\u003c\/a\u003e or any other bumper that allows your winch to sit low between the frame rails.\n\u003cbr\u003e\n\u003cbr\u003e\nWith the ever-growing popularity of the sPod, our original \u003ca href=\"http:\/\/www.metalcloak.com\/2012-JK-Wrangler-Vacuum-Pump-Relocation-Kit-p\/3150.htm\" target=\"_blank\"\u003eVacuum Pump Relocation Bracket\u003c\/a\u003e could interfere with the sPod mount, so we solved the problem by combining the two! \n\u003cbr\u003e\n\u003cbr\u003e\nFinished in our signature gold zinc, the bracket will add long lasting custom looks showing a MetalCloak \"M\" cut-out to let other Jeepers know you support USA made products.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAccording to \"sources\" the reason Jeep moved the canister from the engine compartment down to the frame rails is that it makes a slight pumping sound and they wanted that sound as far away from the driver as possible. Moving the canister does not compromise any of your Jeep's systems.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\t\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810756273,"sku":"3151","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3151_1.jpg?v=1793424889"},{"product_id":"metalcloak-arb-twin-compressor-mounting-kit-jk-wrangler-07-18","title":"MetalCloak \"ARB Twin Compressor\" Mounting Kit, JK Wrangler ('07 - '18) - 3152","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak ARB Twin Compressor Mount is engineered to provide a mounting location for the ARB twin compressor for the Jeep JK Wrangler.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eDesigned for the Jeep JK Wrangler\u003c\/li\u003e\n\u003cli\u003eMade of 1\/8\" Cold Rolled Steel\u003c\/li\u003e\t\t\n\u003cli\u003ePrecision Fit\u003c\/li\u003e\t\n\u003cli\u003eCAD Designed\u003c\/li\u003e\n\u003cli\u003eCNC Formed\u003c\/li\u003e\t\n\u003cli\u003eGold Zinc Chromate Finish\u003c\/li\u003e\t\n\u003cli\u003eQuick \u0026amp; Easy to Install\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nThe MetalCloak twin compressor mount is laser cut from strong 1\/8\" cold rolled steel and is CNC formed for a perfect fit. The bracket provides a \n    \u003cspan\u003esturdy mounting location for the ARB twin compressor or a similar sized air compressor unit. \n\u003cbr\u003e \u003cbr\u003e\t\t\n\t\tThe mount is finished in MetalCloak’s signature gold zinc for a long lasting finish and to protect it against the elements.\n\u003cbr\u003e \u003cbr\u003e \n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eBracket does not interfere with any of your Jeep’s systems.\u003c\/em\u003e\n\u003cbr\u003e \u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe ARB Twin Compressor Mounting Kit will work with the Brushless ARB Twin Compressor.\u003c\/em\u003e\n\u003cbr\u003e \u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eDesigned to work in unison with the \u003ca target=\"_blank\" href=\"https:\/\/metalcloak.com\/jk-wrangler-12-current-vacuum-pump-relocation-kit.html\"\u003eMetalCloak Vacuum Pump Relocation Bracket\u003c\/a\u003e or the \u003ca target=\"_blank\" href=\"https:\/\/metalcloak.com\/jk-wrangler-12-current-spod-mount-vacuum-pump-relocation-kit.html\"\u003eMetalCloak sPod Mount \u0026amp; Vacuum Pump Relocation Kit\u003c\/a\u003e.\u003c\/em\u003e\n\u003cbr\u003e \n\u003cbr\u003e\n\u003cstrong\u003eNote: \u003c\/strong\u003e\u003cem\u003eThe ARB Twin Compressor Bracket will NOT work with J8 master cylinder.\u003c\/em\u003e\t\n\u003cbr\u003e \n\u003cbr\u003e\t\t\t\n\u003c\/span\u003e\n\u003cbr\u003e\t\t\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810789041,"sku":"3152","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3152_1.jpg?v=1793424897"},{"product_id":"metalcloak-arb-single-compressor-mounting-bracket-jk-wrangler","title":"MetalCloak ARB Single Compressor Mounting Bracket, JK Wrangler - 3153","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak ARB Single Compressor Mount is engineered to provide a mounting location for the ARB single compressor for the Jeep JK Wrangler.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eDesigned for the Jeep JK Wrangler\u003c\/li\u003e\n\u003cli\u003eMade of 3\/16\" Hot Rolled Steel\u003c\/li\u003e\t\t\n\u003cli\u003ePrecision Fit\u003c\/li\u003e\t\n\u003cli\u003eCAD Designed\u003c\/li\u003e\n\u003cli\u003eCNC Formed\u003c\/li\u003e\t\n\u003cli\u003eGold Zinc Chromate Finish\u003c\/li\u003e\n\u003cli\u003eEasy to Install\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nThe MetalCloak single compressor mount is laser cut from strong 3\/16\" hot rolled steel and is \n    \u003cspan\u003eCNC formed for a perfect fit. The bracket provides a sturdy mounting location for the ARB single compressor or a similar sized air compressor unit.\n\t\u003cbr\u003e \u003cbr\u003e \t\nThe mount is finished in MetalCloak’s signature gold zinc for a long lasting finish and to protect it against the elements.\n\u003cbr\u003e \u003cbr\u003e \n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eBracket does not interfere with any of your Jeep’s systems.\u003c\/em\u003e\t\t\n\u003cbr\u003e \n\u003cbr\u003e\t\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe ARB Single Compressor Bracket will NOT work with J8 master cylinder.\u003c\/em\u003e\t\t\n\u003cbr\u003e \n\u003cbr\u003e\t\t\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eDesigned to work in unison with the \u003ca target=\"_blank\" href=\"https:\/\/metalcloak.com\/jk-wrangler-12-current-vacuum-pump-relocation-kit.html\"\u003eMetalCloak Vacuum Pump Relocation Bracket\u003c\/a\u003e or the \u003ca target=\"_blank\" href=\"https:\/\/metalcloak.com\/jk-wrangler-12-current-spod-mount-vacuum-pump-relocation-kit.html\"\u003eMetalCloak sPod Mount \u0026amp; Vacuum Pump Relocation Kit\u003c\/a\u003e.\u003c\/em\u003e\n\u003cbr\u003e \n\u003cbr\u003e\t\t\n\u003c\/span\u003e\n\u003cbr\u003e\t\t\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810821809,"sku":"3153","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3153_1.jpg?v=1793424897"},{"product_id":"metalcloak-46-crawler-caps-jk-jl-jt","title":"MetalCloak 46\" Crawler Caps, JK\/JL\/JT - 3165","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 1-2 Weeks\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak 46\" Crawler Caps for the Jeep JK \u0026amp; JL Wrangler and JT Gladiator provide rugged protection and a customized look for MetalCloak frame-built front bumpers.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Combo Bumper Base\u003c\/li\u003e\n\u003cli\u003eCNC-Formed \u003cem\u003e(Zero Welding)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\/8\" Cold-Rolled Steel\u003c\/li\u003e\n\u003cli\u003eBuilt-In Approach Angles\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eQuick and Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe crawler caps mount directly to the MetalCloak combo bumper base measuring 46\" from \n    \u003cspan\u003eend to end when installed. The crawler caps are made of strong CNC-formed 1\/8\" steel, have built-in approach angles to help slide up and over obstacles, and are finished in MetalCloak's signature Black Powder Coat to help protect them against the elements.\n\u003cbr\u003e\n\u003cbr\u003e\nThe crawler end caps are a modular part for your MetalCloak bumper. Add accessories like a stinger, winch hook, license plate adapter, or fairlead. If you want to customize the look of your front bumper, check out the 46\" crawler caps or any of our other bumper options to change to a fresh configuration for your Jeep.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014, MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810854577,"sku":"3165","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3165_1.jpg?v=1793424898"},{"product_id":"metalcloak-56-light-caps-jk-jl-jt","title":"MetalCloak 56\" Light Caps, JK\/JL\/JT - 3166","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 1-2 Weeks\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak 56\" Light Caps for the Jeep JK \u0026amp; JL Wrangler and JT Gladiator provide rugged protection and a customized look for MetalCloak frame-built front bumpers.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Combo Bumper Base\u003c\/li\u003e\n\u003cli\u003eUses Stock Fog Lights\u003c\/li\u003e\n\u003cli\u003eCNC-Formed\u003c\/li\u003e\n\u003cli\u003e1\/8\" Cold-Rolled Steel\u003c\/li\u003e\n\u003cli\u003eBuilt-In Approach Angles\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eQuick and Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe light caps mount directly to the MetalCloak combo bumper base measuring 56\" from \n    \u003cspan\u003eend to end when installed. The light caps are made of strong 1\/8\" steel, have built-in approach angles to help slide up and over obstacles, use the stock fog lights, and are finished in MetalCloak's signature Black Powder Coat to help protect them against the elements.\n\u003cbr\u003e\n\u003cbr\u003e\nThe 56\" light caps are a modular part for your MetalCloak bumper. Add accessories like a stinger, winch hook, license plate adapter, or fairlead. If you want to customize the look of your front bumper, check out the 56\" light caps or any of our other bumper options to change to a fresh configuration for your Jeep.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014, MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe lights from the JL Wrangler factory equipped \u003cstrong\u003esteel bumper\u003c\/strong\u003e will not fit.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810920113,"sku":"3166","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3166_1.jpg?v=1793424899"},{"product_id":"metalcloak-frame-built-light-bar-jk-jl-jt","title":"MetalCloak Frame-Built Light Bar, JK\/JL\/JT - 3192","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 1-2 Weeks\u003c\/p\u003e\n\u003cp\u003eMetalCloak's JK\/JL Wrangler and JT Gladiator Light Bar for the Frame-Built Bumper is a rugged light bracket that mounts directly on the forward face of your Frame-Built Bumper.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Front Bumper\u003c\/li\u003e\n\u003cli\u003e3\/16\" Laser-Cut Mount\u003c\/li\u003e\n\u003cli\u003eCAD-Formed\u003c\/li\u003e\n\u003cli\u003eMultiple Holes for Light Options\u003c\/li\u003e\n\u003cli\u003eBlack Textured Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nShed a little light on your wheeling by adding your favorite lights to the JK\/JL Wrangler or JT Gladiator Frame-Built Bumper with this \n    \u003cspan\u003eLight Bracket.\n\u003cbr\u003e\n\u003cbr\u003e\nThe rugged 3\/16\" steel light bracket mounts directly on the forward face of your Frame-Built Bumper and is finished in a matching Black Textured Powder Coat. Multiple holes allow for a variety of different lights to be mounted. Made in the USA.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThis bracket is not for use if you are running the JK\/JL\/JT Frame-Built Winch Guard.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014, MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810952881,"sku":"3192","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3192_1.jpg?v=1793424900"},{"product_id":"metalcloak-winch-guard-jk-jl-jt","title":"MetalCloak Winch Guard, JK\/JL\/JT - 3175","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 1-2 Weeks\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak Winch Guard for the Jeep JK \u0026amp; JL Wrangler and JT Gladiator provides rugged protection and a customized look for MetalCloak frame-built front bumpers.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Front Bumper\u003c\/li\u003e\n\u003cli\u003eLow-Profile Design\u003c\/li\u003e\n\u003cli\u003eRemovable\u003c\/li\u003e\n\u003cli\u003eMade of 1.75\" OD x .120\" Wall Steel Tubing\u003c\/li\u003e\n\u003cli\u003e3\/16\" Hot-Rolled Steel Gussets\u003c\/li\u003e\n\u003cli\u003eBlack Textured Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eQuick and Easy Installation\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe winch guard's low-profile design adds protection without \n    \u003cspan\u003eobstructing your line of sight. It is made of strong 3\/16\" hot-rolled steel and 1-3\/4\" steel tubing. The guard protects the winch from damage when out on the trail while providing no loss in approach angle like typical bulky front bumpers.\n\u003cbr\u003e\n\u003cbr\u003e\nThe winch guard bolts directly to the MetalCloak frame-built front bumper system for a quick and easy installation. All hardware is included to secure the winch guard into place. The winch guard comes in MetalCloak's signature Black Powder Coat to protect it against corrosion and rust when being abused out on the trail.\n\u003cbr\u003e\n\u003cbr\u003e\nThe winch guard is a modular part for your MetalCloak bumper. Add accessories like a winch hook, license plate adapter, or fairlead. If you want to customize the look of your front bumper, check out this winch guard or any of our other bumper options to change to a fresh configuration for your Jeep.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014, MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124810985649,"sku":"3175","price":284.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3175_1.jpg?v=1793424900"},{"product_id":"metalcloak-jk-wrangler-evap-canister-concealment-kit","title":"MetalCloak JK Wrangler EVAP Canister Concealment Kit - 3370","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak EVAP Canister Concealment Kit moves the low hanging EVAP Canister up and out of harms way on the Jeep JK Wrangler.\u003c\/p\u003e\nFeatures Include:\n\u003cul\u003e\n\u003cli\u003eFits Jeep JK Wranglers\u003c\/li\u003e\t\t\n\u003cli\u003eRelocates the Low Hanging EVAP Canister\u003c\/li\u003e\t\n\u003cli\u003eMade of 1\/8\" Cold Rolled Steel\u003c\/li\u003e\n\u003cli\u003eComes With Hose Extensions \u0026amp; Hose Clamps\u003c\/li\u003e\t\n\u003cli\u003ePrecision Fit\u003c\/li\u003e\t\n\u003cli\u003eCAD Designed\u003c\/li\u003e\n\u003cli\u003eCNC Formed\u003c\/li\u003e\n\u003cli\u003eGold Zinc Chromate Finish\u003c\/li\u003e\t\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\t\n\u003c\/ul\u003e\nThe factory EVAP canister hangs below the frame rail where it can be smashed by rocks and can \n    \u003cspan\u003einterfere with your stock drive shaft during the extremes of articulation. The MetalCloak concealment kit relocates the EVAP canister above the frame protecting it from damage while out on the trails.\n\u003cbr\u003e \u003cbr\u003e \nThe EVAP canister bracket is made of strong 1\/8\" cold rolled steel, is CAD designed and CNC formed for a perfect fit. The bracket is then finished in MetalCloak’s signature gold zinc chromate to protect it against the elements.\n\u003cbr\u003e \u003cbr\u003e\nThe kit comes with hose extensions and hose clamps to prevent kinking the factory lines. The complete relocation kit works like the original equipment and has been engineered to work with the Jeeps sensors.\n\u003cbr\u003e \u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\t\t\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124811018417,"sku":"3370","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3370_1.jpg?v=1793424900"},{"product_id":"metalcloak-mid-stinger-jk-jl-jt","title":"MetalCloak Mid Stinger, JK\/JL\/JT - 3176","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 1-2 Weeks\u003c\/p\u003e\n\u003cp\u003eThe MetalCloak Mid Stinger for the Jeep JK \u0026amp; JL Wrangler and JT Gladiator provides rugged protection and a customized look for MetalCloak frame-built front bumpers.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007-2018 JK Wrangler, 2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/li\u003e\n\u003cli\u003eMounts to the MetalCloak Frame-Built Front Bumper\u003c\/li\u003e\n\u003cli\u003eLow-Profile Design\u003c\/li\u003e\n\u003cli\u003eRemovable\u003c\/li\u003e\n\u003cli\u003eMade of 1.75\" OD x .120\" Wall Steel Tubing\u003c\/li\u003e\n\u003cli\u003e3\/16\" Hot-Rolled Steel Gussets\u003c\/li\u003e\n\u003cli\u003eBlack Textured Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eQuick and Easy Installation\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe stinger's low-profile design adds protection without \n    \u003cspan\u003eobstructing your line of sight. It is made of strong 3\/16\" hot-rolled steel and 1-3\/4\" steel tubing. The stinger protects the grille, radiator, and winch from damage when out on the trail while providing no loss in approach angle like typical bulky front bumpers.\n\u003cbr\u003e\n\u003cbr\u003e\nThe mid stinger bolts directly to the MetalCloak frame-built front bumper system for a quick and easy installation. All hardware is included, including 1\/8\" aluminum back mounting plates to secure the stinger into place. The stinger comes in MetalCloak's signature Black Powder Coat to protect it against corrosion and rust when being abused out on the trail.\n\u003cbr\u003e\n\u003cbr\u003e\nThe mid stinger is a modular part for your MetalCloak bumper. Add accessories like a winch hook, license plate adapter, or fairlead. If you want to customize the look of your front bumper, check out this mid stinger or any of our other bumper options to change to a fresh configuration for your Jeep.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eAs of May 2014, MetalCloak updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/span\u003e\n\u003cbr\u003e\n\u003cbr\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":48124811051185,"sku":"3176","price":454.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/3176_1.jpg?v=1793424901"}],"url":"https:\/\/wp4x4.com\/collections\/metalcloak-jk.oembed","provider":"WP4x4","version":"1.0","type":"link"}