{"title":"Interior","description":"\u003cp\u003eShop interior parts at WP4x4: seats and harnesses, switch panels, storage, roll cages, seat covers, floor liners, electronics and audio, and interior accessories.\u003c\/p\u003e","products":[{"product_id":"motobilt-jku-roll-cage-kit","title":"MOTOBILT JKU ROLL CAGE KIT","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cdiv class=\"tabbed-content--tabs tabs-left\"\u003e\u003cbutton class=\"active\"\u003eDESCRIPTION\u003c\/button\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\n\u003cp\u003eRollovers and flops are a very real possibility to anyone that uses their Jeep off road. The factory jeep cage is constructed using stamped steel to simulate a cage look, but is no stronger than any other vehicle you see on the road today. The sport cages do increase the stiffness of the factory cage, but still rely on the factory mounting points.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Motobilt MB3033 JKU cage kit replaces the factory stamped steel cage with 1-3\/4” DOM 0.120” wall tubing. The Motobilt cage adds A-pillars where the only support in the front was the windshield. Another set of support is added behind the rear seats that include a C-Pillar and optional X-bar bracing.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Motobilt JKU cage is precision cut on a fiber laser then CNC bent to provide a consistent and tight fit to your jeep. All the tubes are 1-3\/4” DOM 0.120 wall tubes and come pre-notched and labeled to allow you to fit the cage together. All the cage mounting points are 3\/16” steel and are bent and formed to the factory tub and we have doubled the cage mounting points for four to eight allowing the load to be spread out even more in the event of a rollover. All of the hardware necessary to install the cage is grade 8 and is included with the kit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Motobilt JKU is a replacement of the factory cage. The Motobilt cage requires the removal of the factory cage and the new cage welded in. Every cage comes with a set of assembly instructions that will guide you how to cut out the factory cage and assemble the new Motobilt cage. We recommend assembling the cage inside the jeep then it can be removed after assembly to be powder coated or painted.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Motobilt JKU cage was designed for the user to be able to retain all the factory seats and seat belts, while also allowing for the factory hard top to be used. Factory and aftermarket soft tops can still be used with some modification. This cage is also designed to be used with the factory doors or any aftermarket half doors.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAn optional B-pillar harness bar can be added to the cage to add mounting points for a seat belt harness for the front seats. Behind the rear seat passengers, you can add the optional C-pillar harness and X-bar which will add a seat belt harness mounting location for the rear passengers while also significantly increasing the stiffness of the Motobilt JKU cage. The mentioned optional tubes are included with this kit.  They are considered optional as the installer could opt to leave them out if needed. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** Does NOT qualify for free shipping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIMPORTANT NOTES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cage kit does NOT prevent injury or death when off-roading.  There are many factors leading to safety.  Even the most highly engineered and built race cage or chassis cannot prevent serious injury from occurring.  This part is for use Off-Road Only. Just because you install a cage does not mean you are 100% protected.  This cage kit should be installed by a qualified welder \/ fabricator. \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44077028835505,"sku":"MB3033","price":3059.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MB3033-view-1_1220x_crop_center_045be3d6-255c-4fae-b8ac-1ff6675917e4.webp?v=1715966653"},{"product_id":"motobilt-rear-seat-mounts-bare","title":"MOTOBILT REAR SEAT MOUNTS - BARE","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eAftermarket rear bucket seat installation is a breeze with this kit. Our unique design has many benefits \u0026amp; features to make your rear bucket seat install fast \u0026amp; easy.\u003c\/p\u003e\n\n\u003cp\u003eThese seat mounts are designed specifically for aftermarket bucket seats with vertical tabs for a mounting hole pattern measuring 14\" wide x 18\" deep. This is a very common hole mounting pattern for many aftermarket seat manufacturers. NOTE: Bench seats will not work with this product because their bolt patterns vary depending on manufacturer, seat width \u0026amp; seat depth. We did design this product using PRP brand rear bucket seats.  \u003c\/p\u003e\n\n\u003cp\u003eThe front of the seats are securely anchored to the factory seat mounts with our heavy duty C shaped supports. The front face of these supports are designed with a built in MOLLE pattern that allows you to quickly fasten any MOLLE compatible accessory. This is the perfect place to store a flashlight, storage bags, first aid kits, firearms or anything else you can think of.\u003c\/p\u003e\n\n\u003cp\u003eWe intentionally left the ends of the rear seat mounts open. With the rear doors open, you gain quick access to several cubic feet of previously unused storage space for your tools, spare parts, recovery gear, jumper cables or more.\u003c\/p\u003e\n\n\u003cp\u003e5 point harness mounting points for the lap belt \u0026amp; submarine belt are all built in. All parts are constructed from heavy duty 3\/16\" high grade steel which is precision laser cut \u0026amp; CNC formed.\u003c\/p\u003e\n\n\u003cp\u003eThese seat mounts will work on BOTH Jeep JLU and Jeep JKU. \u003c\/p\u003e\n\n\u003cp\u003eThere is no drilling required. The complete kit bolts directly into all factory seat mounting locations \u0026amp; will reuse your factory hardware. All assembly fasteners are included.\u003c\/p\u003e\n\n\u003cp\u003eAll parts are shipped as raw steel, ready for your favorite custom paint or powder coat color. Kit includes all fasteners. Detailed step-by-step installation instructions are available on this page.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNote: Does not work with factory seats.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582477488305,"sku":"MB2153","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/stgmz9dk39qiez11lmke.jpg?v=1768188218"},{"product_id":"motobilt-switch-panel-housing-top-surface-mounted","title":"MOTOBILT SWITCH PANEL HOUSING - TOP SURFACE MOUNTED","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eNeed more switches for your custom rig? Need to install custom cutouts for your switches? We have the answer! Formed using 16 gauge Aluminum, this MB5023 Switch Panel is designed to mount on the topside or underside of any flat surface. This product ships with two (2) removable aluminum cover plates. One cover plate has cutouts for seven (7) standard Contura switches. The second cover plate is blank so you can add your own cutouts for any custom application.\u003c\/p\u003e\n\n\u003cp\u003eThe cover plate fastens to the front face of the formed panel housing using the supplied fasteners. We have preinstalled rivnuts in the panel housing to make assembly \u0026amp; access both quick \u0026amp; easy.\u003c\/p\u003e\n\n\u003cp\u003e8.3\"W x 3.1\"H x 4.3\"D\u003c\/p\u003e\n\n\u003cp\u003eThis product ships as bare aluminum. Fasteners for attaching cover plate included.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582477914289,"sku":"MB5023","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/o0lzo1tho1eyhxawpuqh.jpg?v=1768188235"},{"product_id":"motobilt-molle-bed-panel-passenger-side","title":"MOTOBILT MOLLE BED PANEL - PASSENGER SIDE","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eThe Motobilt MB1119-03 Passenger MOLLE Panel is a stylistic \u0026amp; functional addition to the bed area of a Jeep Gladiator to easily mount MOLLE (Modular Lightweight Load-carrying Equipment) accessories.  Our MOLLE rectangular slot pattern is designed to securely fasten nearly any type of aftermarket MOLLE compatible product.  This panel includes 110 rectangular openings \u0026amp; 179 mounting holes to quickly bolt-on our new line of rack compatible accessories.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 11 Ga (0.120”) high grade steel that is laser cut \u0026amp; precision CNC press brake formed,  the Passenger MOLLE Panel can be quickly installed to the bed of any model of Jeep Gladiator, with or without the Jeep Gladiator’s Trail Rail System.  The upper portion of the passenger side panel bolts on to existing threaded mounting holes, while the lower portion requires drilling through the bed \u0026amp; the installation of three (3) bolts (fasteners included).  The passenger panel also include large cut outs for your stock rear bed tie downs \u0026amp; access to the 120 volt receptacle.\u003c\/p\u003e\n\n\u003cp\u003eWe designed the upper shape of our MOLLE bed racks to easily add a Trail Rail system in future or work with your stock Trail Rail system, if so equipped, allowing the sliding tie downs of the Jeep Trail Rail system to fully function in any of their stock positions.  Each bed rack is a one-piece multiple bend design which add extra strength \u0026amp; rigidity.  The dozens of open slots also double as tie down points for nearly any type of off-the-shelf ratcheting tie down strap, giving you any infinite amount of tie down points \u0026amp; combinations to secure virtually any size \u0026amp; shape of cargo.\u003c\/p\u003e\n\n\u003cp\u003eShips bare steel so that the installer can powdercoat or paint to the color of their choice, as some people may want to paint system to match their vehicle.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582478995633,"sku":"MB1119-03","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/enn9oydabqfjzcie5nzi.jpg?v=1768188264"},{"product_id":"motobilt-large-mounting-panel-for-milwaukee-packout","title":"MOTOBILT LARGE MOUNTING PANEL FOR MILWAUKEE PACKOUT","description":"\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e This item ships directly from the manufacturer and may be built to order. Lead times vary and are not guaranteed; contact us for a current estimate.\u003c\/p\u003e\u003cp\u003eGet organized with our MotoMount Panels for Milwaukee PACKOUT Boxes. Constructed from 11 Ga (0.125”) 5052 Aluminum that is laser cut \u0026amp; precision CNC press brake formed, can be quickly installed to a variety of applications.  The slotted holes allow you to mount the Packout Panels in multiple orientations to build the storage system of your dreams.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eMade in the USA\u003cbr\u003e\n\tDimensions H\/W\/D =  1.22\" x 19.47\" x 16.93\" \u003cbr\u003e\n\tWeight = 3 lbs\u003cbr\u003e\n\tFinish = Bare Aluminum\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNOTE: Does not work with packout tumblers cups. \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582479257777,"sku":"MB5073-01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/w86s1t8lgiswzboumti1.jpg?v=1768188271"},{"product_id":"motobilt-molle-bed-panel-front-only","title":"MOTOBILT MOLLE BED PANEL - FRONT ONLY","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eThe Motobilt MB1119-01 Front MOLLE Panel for the JT Gladiator is a stylistic \u0026amp; functional addition to the front bed area of your Jeep Gladiator to easily mount MOLLE (Modular Lightweight Load-carrying Equipment) accessories.  Our MOLLE rectangular slot pattern is designed to securely fasten nearly any type of aftermarket MOLLE compatible product.  This panel includes 105 rectangular openings \u0026amp; 198 mounting holes to quickly bolt-on our new line of rack compatible accessories.\u003cbr\u003e\n \u003cbr\u003e\nConstructed from 11 Ga (0.120”) high grade steel that is laser cut \u0026amp; precision CNC press brake formed,  our MOLLE bed rack system can be quickly installed to the bed of any model of Jeep Gladiator, with or without the Jeep Gladiator’s Trail Rail System.  The front portion of the bed rack is a 100% bolt-on installation which utilizes existing four (4) upper threaded mounting holes along with the stock two (2) lower bed tie down hooks.\u003c\/p\u003e\n\n\u003cp\u003eWe designed the upper shape of our MOLLE bed racks to easily add a Trail Rail system in future or work with your stock Trail Rail system, if so equipped, allowing the sliding tie downs of the Jeep Trail Rail system to fully function in any of their stock positions.  The Front MOLLE Panel is a one-piece multiple bend design which add extra strength \u0026amp; rigidity.  The dozens of open slots also double as tie down points for nearly any type of off-the-shelf ratcheting tie down strap, giving you any infinite amount of tie down points \u0026amp; combinations to secure virtually any size \u0026amp; shape of cargo.\u003c\/p\u003e\n\n\u003cp\u003eShips bare steel so that the installer can powdercoat or paint to the color of their choice, as some people may want to paint system to match their vehicle. \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582480306353,"sku":"MB1119--01","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hodju4a2lfvqezj0icbh_ed0beb02-ca70-476e-b7ab-ab13cf0a6276.jpg?v=1768188303"},{"product_id":"motobilt-molle-bed-panel-driver-side","title":"MOTOBILT MOLLE BED PANEL - DRIVER SIDE","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eThe Motobilt MB1119-02 Driver MOLLE Panel is a stylistic \u0026amp; functional addition to the bed area of a Jeep Gladiator to easily mount MOLLE (Modular Lightweight Load-carrying Equipment) accessories.  Our MOLLE rectangular slot pattern is designed to securely fasten nearly any type of aftermarket MOLLE compatible product.  This panel includes 104 rectangular openings \u0026amp; 171 mounting holes to quickly bolt-on our new line of rack compatible accessories.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 11 Ga (0.120”) high grade steel that is laser cut \u0026amp; precision CNC press brake formed,  the Driver MOLLE Panel can be quickly installed to the bed of any model of Jeep Gladiator, with or without the Jeep Gladiator’s Trail Rail System.  The upper portion of the driver side panel bolts on to existing threaded mounting holes, while the lower portion requires drilling through the bed \u0026amp; the installation of three (3) bolts (fasteners included).  The driver panel also include large cut outs for your stock rear bed tie downs.\u003c\/p\u003e\n\n\u003cp\u003eWe designed the upper shape of our MOLLE bed racks to easily add a Trail Rail system in future or work with your stock Trail Rail system, if so equipped, allowing the sliding tie downs of the Jeep Trail Rail system to fully function in any of their stock positions.  Each bed rack is a one-piece multiple bend design which add extra strength \u0026amp; rigidity.  The dozens of open slots also double as tie down points for nearly any type of off-the-shelf ratcheting tie down strap, giving you any infinite amount of tie down points \u0026amp; combinations to secure virtually any size \u0026amp; shape of cargo.\u003c\/p\u003e\n\n\u003cp\u003eShips bare steel so that the installer can powder coat or paint to the color of their choice, as some people may want to paint system to match their vehicle.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582480961713,"sku":"MB1119-02","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/lm2xhwcgopivvhg0yew3.jpg?v=1768188320"},{"product_id":"motobilt-adjustable-front-prp-seat-mounts","title":"MOTOBILT ADJUSTABLE FRONT PRP SEAT MOUNTS","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eInstalling aftermarket front bucket seats into your 2 door Jeep JL or 4 door Jeep JLU is quick, easy \u0026amp; secure using the Motobilt MB2152 JL\/JLU Adjustable Front Seat Mounts. (Offroad Use Only. See Note Below)\u003c\/p\u003e\n\n\u003cp\u003eThese seat mounts are designed specifically for aftermarket bucket seats with a mounting hole pattern measuring 14\" wide x 18\" deep. This is a very common hole mounting pattern for many aftermarket seat manufacturers. We designed the seat mounts using PRP brand seats, but they mounts are not just limited to the PRP brand.\u003c\/p\u003e\n\n\u003cp\u003eNo two drivers are the same size, thus, we built in a lot of adjustability.\u003cbr\u003e\nIncluded are a pair of heavy duty spring loaded adjustable seat sliders which provide 7\" of fore-aft seat travel. You can install your aftermarket seats up to 2\" lower than your factory seats set in their lowest position. This is a great feature for tall drivers \u0026amp; for those with aftermarket cages. We also include seat riser\/recline angle adjuster plates. These plates rise the seat 2\" in the front while allowing you to adjust to 3 different fixed recline angles.\u003c\/p\u003e\n\n\u003cp\u003eAll parts are constructed using strong 3\/16\" thick high grade steel that is laser cut \u0026amp; CNC formed throughout. The lower brackets were precision designed to fit the unique contours of the Jeep JL floor \u0026amp; bolt directly into the factory seat mounts reusing the factory hardware.\u003c\/p\u003e\n\n\u003cp\u003eWe've even included a submarine belt mounting point for those choosing to use a 5 point harness. And the submarine belt mounting point moves with the seat sliders, which eliminates the need to readjust the belt when you slide the seat forwards or backwards.\u003c\/p\u003e\n\n\u003cp\u003eAll parts are shipped as raw steel, ready for your favorite custom paint or powder coat color. Kit includes all fasteners. Detailed step-by-step installation instructions are available on this page.\u003c\/p\u003e\n\n\u003cp\u003eInstallation Note:\u003c\/p\u003e\n\n\u003cp\u003eBecause aftermarket seats alter the sensors in the front seats and can effect air bag deployment this product is considered an offroad use only product.  This type of product is typically used in more extreme builds.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582483222705,"sku":"MB2152","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rbf5svufl9kkissws2j7.jpg?v=1768188385"},{"product_id":"motobilt-small-mounting-panel-for-milwaukee-packout","title":"MOTOBILT SMALL MOUNTING PANEL FOR MILWAUKEE PACKOUT","description":"\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e This item ships directly from the manufacturer and may be built to order. Lead times vary and are not guaranteed; contact us for a current estimate.\u003c\/p\u003e\u003cp\u003eGet organized with our MotoMount Panels for Milwaukee PACKOUT Boxes. Constructed from 11 Ga (0.125”) 5052 Aluminum that is laser cut \u0026amp; precision CNC press brake formed, can be quickly installed to a variety of applications.  The slotted holes allow you to mount the Packout Panels in multiple orientations to build the storage system of your dreams.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eMade in the USA\u003cbr\u003e\n\tDimensions H\/W\/D =  1.22\" x 9.46\" x 16.93\"\u003cbr\u003e\n\tWeight = 1.5 lbs\u003cbr\u003e\n\tFinish = Bare Aluminum\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNote: Does not work with packout tumblers cups. \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582483615921,"sku":"MB5073-02","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/nwtzugmhzmmee1e1asdq.jpg?v=1768188399"},{"product_id":"motobilt-roll-cage-bracket-kit-bare","title":"MOTOBILT ROLL CAGE BRACKET KIT - BARE","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eBuild your own custom JKU 4 Door tubular cage!\u003c\/p\u003e\n\n\u003cp\u003eThis premium Builder Kit includes 28 specially designed plates that precisely set all of the difficult starting points for fabricating your own tubular cage. All connections allow you to design \u0026amp; build your cage then unbolt it from the vehicle using our unique machined threaded weld nuts. This allows you to completely remove your cage for final welding, powder coating or painting.\u003c\/p\u003e\n\n\u003cp\u003eA-Pillar:\u003cbr\u003e\nThe lower A-Pillar connections bolt into the existing substructure behind the dash. We provide plates that bolt to these hidden connections to provide mounts for a lower windshield dash tube. The lower A-Pillar connections reuse some factory hardware \u0026amp; we also provide all of the necessary new grade 8 fastener hardware to make installation fast. Our lower A-Pillar connections also bolt through the factory reinforced areas of the door openings.\u003c\/p\u003e\n\n\u003cp\u003eThe upper A-Pillar connections bolt into existing factory mounting locations \u0026amp; include cut outs that allow you to reuse your factory sun visors. The upper A-Pillar connections provide you with locations to mount driver \u0026amp; passenger side upper tubes. These connections also allow you to still fold your windshield down.\u003c\/p\u003e\n\n\u003cp\u003eB-Pillar:\u003cbr\u003e\nThe lower B-Pillar connections make use of some factory mounts while also drilling through the floor. We provide machined weld nuts that allow you to bolt on our Tubing Foot Plates making for a complete lower bolted connection. Our lower B-Pillar connections include cut outs allowing you to reuse your factory seat belts.\u003c\/p\u003e\n\n\u003cp\u003eWe provide plates that make a bolted connection for fastening the upper B-Pillars to your cage. These plates simply bolt into existing factory mounting locations. Fasteners included.\u003c\/p\u003e\n\n\u003cp\u003eC-Pillar:\u003cbr\u003e\nThe lower C-Pillar connections are located off existing factory mounts with some additional drilling required through the body. We include plates that fit over the existing studs that secure the rear seat. This still allows you to remove your rear seats, if desired. The lower C-Pillar connections also include machined weld nuts \u0026amp; our Tubing Foot Plates making for secure bolted connections. Fasteners included.\u003c\/p\u003e\n\n\u003cp\u003eD-Pillar:\u003cbr\u003e\nOur lower D-Pillar connections fit over the existing D-Pillar locations. Our D-Pillar connections get welded to the body \u0026amp; include our weld nuts \u0026amp; Tube Foot Plates for yet another strong bolted connection. Fasteners included.\u003c\/p\u003e\n\n\u003cp\u003eIf you have always wanted to build your own roll cage but didn't know where to start, we have the solution for you!\u003c\/p\u003e\n\n\u003cp\u003eWe recommend using a minimum of 1.75\" OD x 0.120\" wall DOM tubing when building your cage (tubing not included). This kit will work with 2.0\" OD x 0.120\" wall DOM tubing as well.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\t\u003cp\u003eNotes:\u003cbr\u003e\n\tThis kit is designed for 2007-2018 Jeep JKU 4 Door models. There are factory variations in the dash \u0026amp; substructure for different model years. Some modification to parts of this kit may be required. This kit will NOT fit 2 door models.\u003cbr\u003e\n\tThis is a Builder Kit, thus, it goes without saying that extensive fabrication \u0026amp; disassembly of the vehicle is required. This kit does NOT tie the tubular cage into the frame.\u003cbr\u003e\n\tWe do NOT show you how to build a tubular cage. The intent of this kit is to provide you with all of the major connection points for you to design \u0026amp; install your own custom tubular cage.\u003cbr\u003e\n\tAll plates are shipped as bare steel. All weld nuts \u0026amp; fasteners are shipped loose. Welding is required.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582484336817,"sku":"MB3032","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dtrio4fgcucv99nuatt4.jpg?v=1768188419"},{"product_id":"motobilt-tailgate-accessory-mount-bare-steel","title":"MOTOBILT TAILGATE ACCESSORY MOUNT - BARE STEEL","description":"\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e This item ships directly from the manufacturer and may be built to order. Lead times vary and are not guaranteed; contact us for a current estimate.\u003c\/p\u003e\u003cp\u003eThe Motobilt Tail Gate Accessory Mount is designed to replace your factory spare tire carrier on a Jeep tailgate to provide multiple mounting locations for bolt-on accessories.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 1\/8” thick high strength steel, this mount is CNC laser cut \u0026amp; CNC precision press brake formed.  The shape of the mount adds extra strength, rigidity, ease of adding bolt-on parts, clears the hinges of the Jeep and gives you peace of mind knowing your accessories are securely positioned for even the toughest of off-road driving.\u003c\/p\u003e\n\n\u003cp\u003eOur mounting bolt pattern fits the Factory tire carrier bolt hole locations on the tailgates of the Jeep. We have included long slots which match the bolt pattern for Rotopax Pack Mounts allowing you bolt-on a huge selection of Rotopax’s patented rotoformed gasoline, diesel, water \u0026amp; storage containers to place them in multiple mounting positions, including double stacking containers for additional fuel, water or storage capacity.  You can easily add up to 8 gallons of fuel for extended driving range or add extra drinking water storage for camping\/overlanding trips with your friends.\u003c\/p\u003e\n\n\u003cp\u003eWe have also included 50 bolt holes for adding other types of bolt-on accessories including Quick Fist clamps, Cube Lights, Light bars or anything else you can think of.  You can easily bolt-on a license plate\/tag and add an aftermarket LED license plate\/tag light like those offered from ORO (Off Road Only).  We have included cut outs to pass wiring through for lights or CB antenna coaxial cables.\u003c\/p\u003e\n\n\u003cp\u003eThis Accessory Mount is not just limited to Jeeps.  It can be installed on just about any flat surface.  It can be mounted inside the bed of a truck, installed on a pick-up truck tailgate, attached to a roll cage, installed in a UTV, mounted in boats, mounted inside or outside of a cargo trailer, emergency vehicles, first aid stations or bolted to wall.  The mounting possibilities are limited only by your imagination.\u003c\/p\u003e\n\n\u003cp\u003eThe types of accessories \u0026amp; products you can attach include shovels, axes, fire extinguishers, flags, fishing rods, lights, license plate\/tag, bottle opener, recovery rope, cooler, Hi-Lift Jack, fuel\/water\/storage containers, camping\/overlanding accessories, plus more!\u003c\/p\u003e\n\n\u003cp\u003eWeight = 8.2 lbs\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582486368433,"sku":"MB1115","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rgrxhwwooupuvr3rc4dr.jpg?v=1768188465"},{"product_id":"motobilt-universal-rear-seat-mounts-for-prp-seats","title":"Motobilt Universal Rear Seat Mounts for PRP Seats","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eMounting Seats like the PRP Rear Bench Seat does not have to be difficult.  The Universal Rear Seat Bracket Kit is a quick way to mount your seat to a flat surface.  The the bracket set can be installed angled in or out depending on your application.  The brackets are laser cut from 3\/16” steel plate.  We ship them raw steel.  The Universal Bench Seat Mounts can be welded on or bolted on. This kit includes a left and right side bracket.  No hardware is included.\u003c\/p\u003e\n\n\u003cp\u003eThe seat bracket bolt holes measure 15” center to center where thea bolt to the seat and 14” center where they would attach to the floor. The forward mount is 3” off the floor while the rear is 1.50” off the floor providing a slight rack to the seat for added comfort. \u003c\/p\u003e\n\n\u003cp\u003eNote: Does NOT work with individual seats from PRP as they have a different mounting dimension.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582486532273,"sku":"MB2164","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/y6tvglackwqbb1ratg6q.jpg?v=1768188468"},{"product_id":"motobilt-windshield-corner-roll-cage-tie-in-plate-bare","title":"MOTOBILT WINDSHIELD CORNER ROLL CAGE TIE IN PLATE - BARE","description":"\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e This item ships directly from the manufacturer. Typical lead time is 12-15 business days before shipping. Lead times are estimates and not guaranteed.\u003c\/p\u003e\u003cp\u003eThe Motobilt Jeep YJ \u0026amp; TJ\/LJ Windshield Corner Roll Cage Tie In Plate allows you to integrate your roll cage into the factory windshield mount. The factory Jeep YJ \u0026amp; TJ\/LJ roll bar ties into the top corners of the windshield frame. These Motobilt Jeep YJ \u0026amp; TJ\/LJ roll cage plates are laser cut to bolt directly to the corner of your windshield frame. They are made out of heavy-duty laser cut steel plate that is 3\/16 inch thick. The Motobilt plates are large enough to weld up to a 2-inch diameter DOM tube to them.\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eJeep YJ \u0026amp; TJ\/LJ Windshield Corner Roll Cage Tie In Plate\u003cbr\u003e\n\tLaser cut steel plate that is 3\/16 inch thick\u003cbr\u003e\n\tTies into the top corners of the windshield frame\u003cbr\u003e\n\tSold as each\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNote:\u003c\/p\u003e\n\n\n\t\u003cp\u003ePlates are large enough to weld up to a 2-inch diameter DOM tube to them\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582486696113,"sku":"MB3021","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/l4b6r2ccklvmqbbvmep4.jpg?v=1768188473"},{"product_id":"dv8-offroad-tailgate-reinforcement-molle-panel","title":"DV8 Offroad Tailgate Reinforcement Molle Panel","description":"\u003cp\u003eOur Wrangler JL Tailgate Reinforcement Molle Panel takes the load off your factory hinges and spreads weight evenly across the entire rear door, giving your Jeep the backbone it needs, especially when you’re running 35s. It keeps your tire and wheel fitment exactly the same as stock while adding a rugged, clean look that adds storage capabilities.\u003c\/p\u003e\n\n\u003cp\u003eThe integrated molle panel gives you mounting room for trail gear, recovery tools, comms, and other essentials, keeping everything secure. Installation is simple and fully bolt-on, and it’s fully compatible with DV8 tire delete kits (TSJL-02 and TSJL-04). Finished in a durable micro-texture black powder coat, this reinforcement panel blends strength, utility, and style.\u003c\/p\u003e\n\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\n\n\t\u003cp\u003eReduces strain on factory door hinges\u003cbr\u003e\n\tDistributes weight more evenly across the entire door\u003cbr\u003e\n\tOffers a rugged and complete look\u003cbr\u003e\n\tProvides reassurance when running 35\" tires\u003cbr\u003e\n\tTire and wheel\/offset fitment will remain the same as factory options\u003cbr\u003e\n\tProvides molle mounting for gear and other offroad necessary accessories\u003cbr\u003e\n\tSimple and straight forward install\u003cbr\u003e\n\tWill work with DV8 tire deletes (TSJL-02 and TSJL-04)\u003cbr\u003e\n\tMicro-Texture Black Powder Coat Finish\u003cbr\u003e\n\tBolt-On Installation\u003c\/p\u003e","brand":"DV8","offers":[{"title":"Default Title","offer_id":46631404634289,"sku":"TCJL-04","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/njpnr59ukipc8x5gaube.jpg?v=1770012754"},{"product_id":"bxmod84b-spod-universal-bantamx-modular-w-blue-leds-84in-cable","title":"sPOD Universal BantamX Modular w\/ Blue LEDs (84in Cable)","description":"\u003cp\u003eThe BantamX will save hours of wiring \u0026amp; installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection \u0026amp; reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity \u0026amp; field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained \u0026amp; controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eAluminum lid\u003c\/li\u003e\n\u003cli\u003eVehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile APP (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach switch can be programmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series App:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable “Latch” or “Momentary” actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExternal Controller Options\u003c\/strong\u003e (not included with system and can only be used in conjunction with an sPOD controller)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThird party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers \u0026amp; more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with eight dual lit LED Amber switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot CAT-6 Ethernet, can be extended up to 25-feet from BantamX)\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available\u003c\/li\u003e\n\u003cli\u003eAbility to daisy chain panels for remote operations (ie: panel in cab and panel at rear of truck)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003eCan run in conjunction with another 8-Switch panel, HD \u0026amp; Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Blue LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115885637809,"sku":"BXMOD84B","price":923.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fcflrqbkz6yob5ea5lae.jpg?v=1793279620"},{"product_id":"phc-jl-jt-rugged-radios-power-and-antenna-cable-harness","title":"Rugged Radios Power and Antenna Cable Harness","description":"\u003cp\u003eRugged Radios Power and Antenna Cable Harness for Jeep JT\/JL simplify radio kit installation. Engineered for Jeep JL and JT, ensures a hassle-free installation. A custom fit grommet included and fits into the existing firewall hole for a clean, finished look. An adapter accommodates old style T-power connector.\u003c\/p\u003e\n\u003cp\u003eCable length is designed for driver side antenna mounting on Jeep JL\/JT with Rugged Radios \u003cstrong\u003eDriver Side Antenna Mount\u003c\/strong\u003e and radio installed using the Mobile Radio Mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The center conductor inside the NMO antenna stud is not solid metal and can be damaged if overtightened. As shown in the photo above, when installing the NMO nut, we recommend holding the wrench vertically to reduce torque and overtightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JT\/JL\u003c\/p\u003e","brand":"Rugged Radios","offers":[{"title":"Default Title","offer_id":48115887014065,"sku":"PHC-JL-JT","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RRPPHCJLJT.jpg?v=1793279627"},{"product_id":"70957-rough-country-mlc-6-multiple-light-controller","title":"Rough Country MLC-6 Multiple Light Controller","description":"\u003cp\u003eTake command of your electronic devices with Rough Country’s MLC-6 Multiple Light Controller. This easy and reliable electrical upgrade allows you to control six auxiliary LED lights or electrical devices with the push of a button. Each kit features a power distribution block, mounting hardware, and high-temperature, abrasion-resistant wiring cables.\u003c\/p\u003e\n\u003cp\u003eRough Country’s MLC-6 is a professional quality power distribution system and switchboard for 2021+ Ford Bronco models, allowing you to add professional control for your electronic devices. This innovative system uses an in-line fused relay allowing you to safely connect up to 6 devices to one of the factory switches with no mess and no fuss. The MLC-6 Power Distribution Block features an integrated LVCO (Low-Voltage Cut-Off) Circuit that detects the battery voltage and will cut off each accessory when the battery falls below operating voltage, ensuring you always have enough power to turn over your engine. This distribution system also features a 12-position terminal block for hooking up accessories, six plug-in style 40-amp cube relays, and 6 ATO style 30-amp automotive fuses for superior power and protection.\u003c\/p\u003e\n\u003cp\u003eRough Country's MLC-6 Multiple Light Controller comes with 1-year Limited Manufacturer's Warranty. As such, the product is protected from structural and workmanship damage after the date of purchase.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12 position terminal block for accessory attachment.\u003c\/li\u003e\n\u003cli\u003e6 40-amp cube style relays. (plug-in style) 6 Diodes to prevent LED \"field collapse\".\u003c\/li\u003e\n\u003cli\u003e6 30-amp ATO style automotive fuses.\u003c\/li\u003e\n\u003cli\u003eInline 50amp manual resetting circuit breaker.\u003c\/li\u003e\n\u003cli\u003e8 gauge power leads with crimped and soldered terminal for connection to the battery.\u003c\/li\u003e\n\u003cli\u003eIntegrated LVCO (Low-Voltage-Cut-Off) circuit.\u003c\/li\u003e\n\u003cli\u003eHigh-temp, abrasion-resistant wiring cables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNOTES - IMPORTANT: Requires splicing for the installation process.\u003c\/p\u003e\n\u003cp\u003eONLY fits models equipped with factory auxiliary switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Bronco 2021+\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115890585777,"sku":"70957","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/lut0whl4trqpzy46q6sd.jpg?v=1793279654"},{"product_id":"slmod84g-spod-sourcelt-modular-switch-panel-w-green-led-84in-battery-cables","title":"sPOD SourceLT Modular Switch Panel  w\/Green LED - 84in Battery Cables","description":"\u003cp\u003e\u003cstrong\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• 6 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 12-position terminal block (easily attach accessories)\u003cbr\u003e\n• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• Self-healing fault protection circuits (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003cbr\u003e\n• 100amp in-line fuse\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity and field collapse\u003cbr\u003e\n• On-demand wireless software updates\/upgrades \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003cbr\u003e\n• Universal \u0026amp; vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEach switch can be programmed for:\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On-Road and Off-Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Green LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115890716849,"sku":"SLMOD84G","price":551.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/jf1cvop4a05nzmcfvpqi.jpg?v=1793279656"},{"product_id":"slmod84b-spod-sourcelt-modular-w-led-switch-panel-and-84in-battery-cables-blue","title":"sPOD SourceLT Modular w\/ LED Switch Panel and 84in Battery Cables - Blue","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Blue LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115890880689,"sku":"SLMOD84B","price":551.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPDSLMOD84B.jpg?v=1793279656"},{"product_id":"slmod84a-spod-universal-sourcelt-modular-w-amber-leds-84in-cable","title":"sPOD Universal SourceLT Modular w\/ Amber LEDs (84in Cable)","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Available through sPOD Mobile APP (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach switch can be programmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn-Road and Off-Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app\u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible\u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later\u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini\u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Amber LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115890978993,"sku":"SLMOD84A","price":551.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/lgtvl8qa8jzu64zajr5i.jpg?v=1793279657"},{"product_id":"slmod36r-spod-universal-sourcelt-modular-w-red-leds-36in-cable","title":"sPOD Universal SourceLT Modular w\/ Red LEDs (36in Cable)","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available through sPOD Mobile APP (free):\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEach switch can be programmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn-Road and Off-Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Red LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891175601,"sku":"SLMOD36R","price":535.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/upoknp1udznsltpcgwvu.jpg?v=1793279657"},{"product_id":"873125-spod-sourcelt-w-genesis-adapter-and-amber-led-switch-panel","title":"sPOD SourceLT w\/Genesis Adapter and Amber LED Switch Panel","description":"\u003cp\u003e\u003cstrong\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• 6 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 12-position terminal block (easily attach accessories)\u003cbr\u003e\n• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• Self-healing fault protection circuits (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003cbr\u003e\n• 50amp auto-resetting circuit breaker\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity and field collapse\u003cbr\u003e\n• On-demand wireless software updates\/upgrades \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003cbr\u003e\n• Universal \u0026amp; vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEach switch can be programmed for:\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On-Road and Off-Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThis panel has an empty space for the Genesis Adapter. NOTE: G Screen not included!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2009-2018\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891273905,"sku":"873125","price":605.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD873125.jpg?v=1793279658"},{"product_id":"873120-spod-sourcelt-w-genesis-adapter-and-amber-led-switch-panel","title":"sPOD SourceLT w\/Genesis Adapter and Amber LED Switch Panel","description":"\u003cp\u003e\u003cstrong\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• 6 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 12-position terminal block (easily attach accessories)\u003cbr\u003e\n• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• Self-healing fault protection circuits (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003cbr\u003e\n• 50amp auto-resetting circuit breaker\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity and field collapse\u003cbr\u003e\n• On-demand wireless software updates\/upgrades \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003cbr\u003e\n• Universal \u0026amp; vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003cbr\u003e\nEach switch can be programmed for:\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On-Road and Off-Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis panel has an empty space for the Genesis Adapter. \u003c\/strong\u003e\u003cstrong\u003eNOTE: G Screen not included!\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2007-2008\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891372209,"sku":"873120","price":605.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD873120.jpg?v=1793279658"},{"product_id":"873110-spod-source-lt-w-blue-led-switch-panel","title":"sPOD Source LT w\/ Blue LED Switch Panel","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 07-08\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891470513,"sku":"873110","price":598.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD873110.jpg?v=1793279659"},{"product_id":"873050-spod-sourcelt-w-green-led-switches","title":"sPOD SourceLT w\/ Green LED Switches","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless!\u003c\/p\u003e\n\u003cp\u003eNo cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Green LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e LJ\/TJ\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891568817,"sku":"873050","price":640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/wifskdczhryzfvgnqvqt.jpg?v=1793279660"},{"product_id":"873035-spod-sourcelt-w-red-led-switches","title":"sPOD SourceLT w\/ Red LED Switches","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base with built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile APP (free):\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEach switch can be programmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn-Road and Off-Road mode of operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e TJ 1997-2002\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891798193,"sku":"873035","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rdmljhrge7uasyle1jh7.jpg?v=1793279661"},{"product_id":"873025-spod-sourcelt-w-blue-led-switch-panel","title":"sPOD SourceLT w\/Blue LED Switch Panel","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e TJ 1997-02\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115891994801,"sku":"873025","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD873025.jpg?v=1793279661"},{"product_id":"870060-spod-bantamx-w-led-switch-panel-blue","title":"sPOD BantamX w\/LED Switch Panel, Blue","description":"\u003cp\u003eThe BantamX will save hours of wiring \u0026amp; installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection \u0026amp; reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity \u0026amp; field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained \u0026amp; controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHARDWARE:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel base w\/built-in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eAluminum lid\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach switch can be programmed for:\u003c\/li\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe following features are only available through the purchase of our Pro-Series App:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eThe initial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable “Latch” or “Momentary” actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThird-party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers \u0026amp; more\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSWITCH PANEL\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with eight dual-lit LED Blue switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion-resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10-foot CAT-6 Ethernet, which can be extended up to 25 feet from BantamX)\u003c\/li\u003e\n\u003cli\u003eEach switch has 2 programmable modes: strobe or flash\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded, and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available\u003c\/li\u003e\n\u003cli\u003eAbility to daisy chain panels for remote operations (ie: panel in cab and panel at rear of truck)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when the panel is unplugged\u003c\/li\u003e\n\u003cli\u003eCan run in conjunction with another 8-Switch panel, HD \u0026amp; Touchscreen \u003c\/li\u003e\n\u003cli\u003eTwo RJ45 ports available integrated into the CAN-Bus controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Blue LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2007-08\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892060337,"sku":"870060","price":898.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD870060.jpg?v=1793279662"},{"product_id":"bxmod84g-spod-bantamx-modular-switch-panel-w-green-led-84in-battery-cables","title":"sPOD BantamX Modular Switch Panel w\/Green LED - 84in Battery Cables","description":"\u003cp\u003e\u003cstrong\u003eThe BantamX will save hours of wiring \u0026amp; installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Fully programmable, digital controlled system\u003cbr\u003e\n• 8 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 16-position terminal block (easily attach accessories)\u003cbr\u003e\n• 2 controller ports (RJ45) for Ethernet cables\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• One ATM mini-style fuse for LVCO protection \u0026amp; reset\u003cbr\u003e\n• Failsafe self-healing fault protection system (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; relays)\u003cbr\u003e\n• 100amp in-line fuse\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC or 24VDC\u003cbr\u003e\n• 8-position input terminal block for controlling outputs\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity \u0026amp; field collapse\u003cbr\u003e\n• Ignition control and safety lock-out for switches 1 and 2 (optional)\u003cbr\u003e\n• Up to 4 BantamX units can be daisy chained \u0026amp; controlled by one Touchscreen\u003cbr\u003e\n• On-demand wireless software updates\/upgrades\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Aluminum lid\u003cbr\u003e\n• Vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach switch can be programmed for:\u003c\/strong\u003e\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On Road and Off Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series App:\u003c\/strong\u003e\u003cbr\u003e\n• Circuit timers\u003cbr\u003e\n• Switch lockout\u003cbr\u003e\n• Initial startup current for each circuit is raised to 65amps for 5 seconds\u003cbr\u003e\n• Program any circuit to be always on while still maintaining fault protection\u003cbr\u003e\n• Option to disable deep sleep mode\u003cbr\u003e\n• Selectable auto restart after circuit shuts down from over current\/short\u003cbr\u003e\n• Programmable Current Limiting (in 2amp increments up to 30amps)\u003cbr\u003e\n• Selectable auto restart for current limiting shut down\u003cbr\u003e\n• Selectable “Latch” or “Momentary” actions for inputs\u003cbr\u003e\n• Programmable ignition control for all 8 circuits\u003cbr\u003e\n• Variable strobe function to create custom flash\/strobe patterns\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Third party switches\u003cbr\u003e\n• Computers\u003cbr\u003e\n• Arduino\u003cbr\u003e\n• Raspberry Pi\u003cbr\u003e\n• Alpine Audio systems KAC-001 head unit controller\u003cbr\u003e\n• Sensors, thermostats, pressure switches, fan controllers \u0026amp; more\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with eight dual lit LED Amber switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot CAT-6 Ethernet, can be extended up to 25-feet from BantamX)\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available\u003c\/li\u003e\n\u003cli\u003eAbility to daisy chain panels for remote operations (ie: panel in cab and panel at rear of truck)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003eCan run in conjunction with another 8-Switch panel, HD \u0026amp; Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Green LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892191409,"sku":"BXMOD84G","price":923.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dfxnjh22z92iyjkjhsyd.jpg?v=1793279663"},{"product_id":"bxmod36r-spod-bantamx-modular-switch-panel-w-red-led-36in-battery-cables","title":"sPOD BantamX Modular Switch Panel w\/Red LED - 36in Battery Cables","description":"\u003cp\u003e\u003cstrong\u003eThe BantamX will save hours of wiring \u0026amp; installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Fully programmable, digital controlled system\u003cbr\u003e\n• 8 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 16-position terminal block (easily attach accessories)\u003cbr\u003e\n• 2 controller ports (RJ45) for Ethernet cables\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• One ATM mini-style fuse for LVCO protection \u0026amp; reset\u003cbr\u003e\n• Failsafe self-healing fault protection system (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; relays)\u003cbr\u003e\n• 100amp in-line fuse\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC or 24VDC\u003cbr\u003e\n• 8-position input terminal block for controlling outputs\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity \u0026amp; field collapse\u003cbr\u003e\n• Ignition control and safety lock-out for switches 1 and 2 (optional)\u003cbr\u003e\n• Up to 4 BantamX units can be daisy chained \u0026amp; controlled by one Touchscreen\u003cbr\u003e\n• On-demand wireless software updates\/upgrades\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Aluminum lid\u003cbr\u003e\n• Vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach switch can be programmed for:\u003c\/strong\u003e\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On Road and Off Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series App:\u003c\/strong\u003e\u003cbr\u003e\n• Circuit timers\u003cbr\u003e\n• Switch lockout\u003cbr\u003e\n• Initial startup current for each circuit is raised to 65amps for 5 seconds\u003cbr\u003e\n• Program any circuit to be always on while still maintaining fault protection\u003cbr\u003e\n• Option to disable deep sleep mode\u003cbr\u003e\n• Selectable auto restart after circuit shuts down from over current\/short\u003cbr\u003e\n• Programmable Current Limiting (in 2amp increments up to 30amps)\u003cbr\u003e\n• Selectable auto restart for current limiting shut down\u003cbr\u003e\n• Selectable “Latch” or “Momentary” actions for inputs\u003cbr\u003e\n• Programmable ignition control for all 8 circuits\u003cbr\u003e\n• Variable strobe function to create custom flash\/strobe patterns\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Third party switches\u003cbr\u003e\n• Computers\u003cbr\u003e\n• Arduino\u003cbr\u003e\n• Raspberry Pi\u003cbr\u003e\n• Alpine Audio systems KAC-001 head unit controller\u003cbr\u003e\n• Sensors, thermostats, pressure switches, fan controllers \u0026amp; more\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with eight dual lit LED Amber switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot CAT-6 Ethernet, can be extended up to 25-feet from BantamX)\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available\u003c\/li\u003e\n\u003cli\u003eAbility to daisy chain panels for remote operations (ie: panel in cab and panel at rear of truck)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003eCan run in conjunction with another 8-Switch panel, HD \u0026amp; Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Red LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892289713,"sku":"BXMOD36R","price":908.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/cjih0mlfhbkb9nsfr1o0.jpg?v=1793279664"},{"product_id":"bxmod36g-spod-universal-bantamx-modular-w-green-leds-36in-cables","title":"sPOD Universal BantamX Modular w\/ Green LEDs (36in Cables)","description":"\u003cp\u003eThe BantamX will save hours of wiring \u0026amp; installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully programmable, digital controlled system\u003c\/li\u003e\n\u003cli\u003e8 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e16-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003e2 controller ports (RJ45) for Ethernet cables\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eOne ATM mini-style fuse for LVCO protection \u0026amp; reset\u003c\/li\u003e\n\u003cli\u003eFailsafe self-healing fault protection system (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; relays)\u003c\/li\u003e\n\u003cli\u003e100amp in-line fuse\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC or 24VDC\u003c\/li\u003e\n\u003cli\u003e8-position input terminal block for controlling outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity \u0026amp; field collapse\u003c\/li\u003e\n\u003cli\u003eIgnition control and safety lock-out for switches 1 and 2 (optional)\u003c\/li\u003e\n\u003cli\u003eUp to 4 BantamX units can be daisy chained \u0026amp; controlled by one Touchscreen\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eAluminum lid\u003c\/li\u003e\n\u003cli\u003eVehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile APP (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach switch can be programmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn Road and Off Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe following features are only available through the purchase of our Pro-Series App:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCircuit timers\u003c\/li\u003e\n\u003cli\u003eSwitch lockout\u003c\/li\u003e\n\u003cli\u003eInitial startup current for each circuit is raised to 65amps for 5 seconds\u003c\/li\u003e\n\u003cli\u003eProgram any circuit to be always on while still maintaining fault protection\u003c\/li\u003e\n\u003cli\u003eOption to disable deep sleep mode\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart after circuit shuts down from over current\/short\u003c\/li\u003e\n\u003cli\u003eProgrammable Current Limiting (in 2amp increments up to 30amps)\u003c\/li\u003e\n\u003cli\u003eSelectable auto restart for current limiting shut down\u003c\/li\u003e\n\u003cli\u003eSelectable “Latch” or “Momentary” actions for inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable ignition control for all 8 circuits\u003c\/li\u003e\n\u003cli\u003eVariable strobe function to create custom flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExternal Controller Options\u003c\/strong\u003e (not included with system and can only be used in conjunction with an sPOD controller)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThird party switches\u003c\/li\u003e\n\u003cli\u003eComputers\u003c\/li\u003e\n\u003cli\u003eArduino\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eAlpine Audio systems KAC-001 head unit controller\u003c\/li\u003e\n\u003cli\u003eSensors, thermostats, pressure switches, fan controllers \u0026amp; more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with eight dual lit LED Amber switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot CAT-6 Ethernet, can be extended up to 25-feet from BantamX)\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available\u003c\/li\u003e\n\u003cli\u003eAbility to daisy chain panels for remote operations (ie: panel in cab and panel at rear of truck)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003eCan run in conjunction with another 8-Switch panel, HD \u0026amp; Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Green LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892420785,"sku":"BXMOD36G","price":908.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ixbqto2huabtoccdyhfq.jpg?v=1793279664"},{"product_id":"slmod36g-spod-sourcelt-modular-led-switch-panel-w-36in-battery-cables-green","title":"sPOD SourceLT Modular LED Switch Panel w\/ 36in Battery Cables - Green","description":"\u003cp\u003e\u003cstrong\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• 6 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 12-position terminal block (easily attach accessories)\u003cbr\u003e\n• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• Self-healing fault protection circuits (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003cbr\u003e\n• 100amp in-line fuse\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity and field collapse\u003cbr\u003e\n• On-demand wireless software updates\/upgrades \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003cbr\u003e\n• Universal \u0026amp; vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEach switch can be programmed for:\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On-Road and Off-Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 6-Circuit Control System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892519089,"sku":"SLMOD36G","price":535.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/alylmiroegrdgli2sps0.jpg?v=1793279665"},{"product_id":"slmod36b-spod-sourcelt-modular-w-led-switch-panel-and-36in-battery-cables-blue","title":"sPOD SourceLT Modular w\/ LED Switch Panel and 36in Battery Cables - Blue","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Blue LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892715697,"sku":"SLMOD36B","price":535.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPDSLMOD36B.jpg?v=1793279665"},{"product_id":"860360-spod-switch-rocker-backup-lights","title":"sPOD Switch Rocker Backup Lights","description":"\u003cp\u003e\u003cspan\u003eBackup Lights Contura V Rocker.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese rockers are recommended for use with 6 and 8-switch Dual LED systems!. If added to our standard single light system the bottom of the rocker will not light up and will not display color. The rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 day\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892814001,"sku":"860360","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/pzgemuydjyxvsgix30ck.jpg?v=1793279666"},{"product_id":"860600-spod-tail-lights-rocker-switch-cover","title":"sPOD Tail Lights Rocker Switch Cover","description":"\u003cp\u003eThese rockers are recommended for use with our 6 and 8-switch Dual LED systems! Please be sure your selected system's part number ends in LT-LED. Example: 600-07LT-LED. If added to our standard single light system the bottom of the rocker will not light up and will not display color.\u003cbr\u003e\n\u003cbr\u003e\nThe rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\u003c\/ul\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115892977841,"sku":"860600","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/zvkwvu8ckmznjygwiry8.jpg?v=1793279667"},{"product_id":"sl-a0708-jk-a-spod-sourcelt-w-air-gauge-and-amber-led-switch-panel","title":"sPOD SourceLT w\/Air Gauge and Amber LED Switch panel","description":"\u003cp\u003e\u003cstrong\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• 6 circuits rated at 30 amps at 12.5 VDC per circuit\u003cbr\u003e\n• 12-position terminal block (easily attach accessories)\u003cbr\u003e\n• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003cbr\u003e\n• Integrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003cbr\u003e\n• Self-healing fault protection circuits (from 1.5 to 30amps)\u003cbr\u003e\n• Current-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003cbr\u003e\n• 50amp auto-resetting circuit breaker\u003cbr\u003e\n• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003cbr\u003e\n• Operates on 12VDC\u003cbr\u003e\n• Built-in Bluetooth capabilities for remote control\u003cbr\u003e\n• Protection against: overheating, over-current, shorts, reverse polarity and field collapse\u003cbr\u003e\n• On-demand wireless software updates\/upgrades \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDWARE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Powder coated steel base w\/ built in hardware\u003cbr\u003e\n• Silicone gasket for weatherproofing\u003cbr\u003e\n• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003cbr\u003e\n• Universal \u0026amp; vehicle specific mounting options\u003cbr\u003e\n• Robust insulated base and cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEach switch can be programmed for:\u003cbr\u003e\n• Dimming\u003cbr\u003e\n• Strobe\u003cbr\u003e\n• Flash\u003cbr\u003e\n• Momentary\u003cbr\u003e\n• Switch Linking\u003cbr\u003e\n• On-Road and Off-Road mode of operation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWITCH PANEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated \u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003cli\u003eComplete Air Gauge kit: 0-200 PSI Air Gauge w\/ Quick Release Camozzi fittings and 10 feet of high pressure connection line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app \u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible \u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later \u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini \u003c\/li\u003e\n\u003cli\u003eMust have existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 07-08\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893010609,"sku":"SL-A0708-JK-A","price":615.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPDSLA0708JKA.jpg?v=1793279667"},{"product_id":"860445-spod-headlights-rocker-switch-cover","title":"sPOD Headlights Rocker Switch Cover","description":"\u003cp\u003eThe rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\u003c\/ul\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893076145,"sku":"860445","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ealmzoebxzshx9wjh3is.jpg?v=1793279667"},{"product_id":"860465-spod-jk-a-pillar-lights-rocker-switch","title":"sPOD JK A-Pillar Lights Rocker Switch","description":"\u003cp\u003eThe rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 Day Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893174449,"sku":"860465","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/zwgoya9texgyzhv7jeko.jpg?v=1793279669"},{"product_id":"860490-spod-jk-rear-lights-rocker-switch","title":"sPOD JK Rear Lights Rocker Switch","description":"\u003cp\u003eThe rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 Day Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893305521,"sku":"860490","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ogjic77etsm0ume82qjd.jpg?v=1793279669"},{"product_id":"860495-spod-rock-lights-rocker-switch","title":"sPOD Rock Lights Rocker Switch","description":"\u003cp\u003e\u003cspan\u003eRock Lights Contura V Rocker.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese rockers are recommended for use with 6 and 8-switch Dual LED systems!. If added to our standard single light system the bottom of the rocker will not light up and will not display color. The rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 day\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893403825,"sku":"860495","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/cdztcu7opburodir3gbd.jpg?v=1793279668"},{"product_id":"860515-spod-jk-windshield-lights-rocker-switch","title":"sPOD JK Windshield Lights Rocker Switch","description":"\u003cp\u003eThe rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 Day Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893567665,"sku":"860515","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fiybltkmobwprdnw2so3.jpg?v=1793279670"},{"product_id":"860565-spod-rear-lights-middle-finger-rocker-switch","title":"sPOD Rear Lights (Middle Finger) Rocker Switch","description":"\u003cp\u003e\u003cspan\u003eRear Lights Contura V Rocker.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese rockers are recommended for use with 6 and 8-switch Dual LED systems!. If added to our standard single light system the bottom of the rocker will not light up and will not display color. The rocker is made from an opaque white plastic and then coated in a black finish. The laser only removes the black finish and leaves the opaque white plastic exposed. Light passes through the laser etched areas (such as the symbol and text). The LED in the switch body is what gives the color accents and not the rocker itself.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 90 day\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893665969,"sku":"860565","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/laujwxofv6a0tekohvy0.jpg?v=1793279670"},{"product_id":"873115-spod-sourcelt-w-blue-led-switch-panel","title":"sPOD SourceLT w\/Blue LED Switch Panel","description":"\u003cp\u003eThe SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories.\u003c\/p\u003e\n\u003cp\u003eDue to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab, or tapping into the vehicle's electrical system. It's the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSourceLT w\/ Blue LED Switch panel for JK 2009-2018\u003c\/li\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 feet) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity, and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel base w\/built-in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle-specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach switch can be programmed for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming\u003c\/li\u003e\n\u003cli\u003eStrobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn-Road and Off-Road Modes of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual-lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion-resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eIt comes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when the panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app\u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible\u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later\u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini\u003c\/li\u003e\n\u003cli\u003eMust have an existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method:\u003c\/strong\u003e Thumb Screw Fastening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Blue LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-Year Limited Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893797041,"sku":"873115","price":598.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD873115.jpg?v=1793279670"},{"product_id":"873190-spod-sourcelt-w-red-led-switch-panel","title":"sPOD SourceLT w\/Red LED Switch Panel","description":"\u003cp\u003eThe SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories.\u003c\/p\u003e\n\u003cp\u003eDue to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab, or tapping into the vehicle's electrical system. It's the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSourceLT w\/ Red LED Switch panel for JK 2009-2018\u003c\/li\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 feet) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses and no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity, and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel base w\/built-in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal and vehicle-specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures Available Through sPOD Mobile App (free):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach switch can be programmed for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming Strobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn-Road and Off-Road Modes of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual-lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion-resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eIt comes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder-coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when the panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to iTunes or Google Play Store to download the sPOD app\u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible\u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later\u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini\u003c\/li\u003e\n\u003cli\u003eMust have an existing sPod system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-Year Limited Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115893928113,"sku":"873190","price":598.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPD873190.jpg?v=1793279671"},{"product_id":"slmod36a-spod-sourcelt-modular-w-led-switch-panel-and-36in-battery-cables-amber","title":"sPOD SourceLT Modular w\/ LED Switch Panel and 36in Battery Cables - Amber","description":"\u003cp\u003eThe sPOD SourceLT - Amber is the ideal solution for any of your aftermarket electrical accessories. The 6-circuit control system is small and can be placed in many different locations. The sPOD is simple, neat, and a safe way to power and control your 12VDC accessories. There is simply one cable that goes into the cab, and during installation, there are no cutting or fishing wires in the cab, and you never have to tap into your vehicle’s electrical system.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSix circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 feet) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs are controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against: overheating, over-current, shorts, reverse polarity, and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHardware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel base with built-in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silk screened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFeatures Available Through sPOD Mobile App (\u003cstrong\u003eFree\u003c\/strong\u003e):\u003c\/p\u003e\n\u003cp\u003eEach switch can be programmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimming Strobe\u003c\/li\u003e\n\u003cli\u003eFlash\u003c\/li\u003e\n\u003cli\u003eMomentary\u003c\/li\u003e\n\u003cli\u003eSwitch Linking\u003c\/li\u003e\n\u003cli\u003eOn-Road and Off-Road mode of operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSwitch Panel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual-lit\u003c\/li\u003e\n\u003cli\u003eLED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion-resistant nylon braided sleeving\u003c\/li\u003e\n\u003cli\u003eComes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded, and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when the panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBluetooth Requirements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess iTunes or Google Play Store to download the sPOD app\u003c\/li\u003e\n\u003cli\u003eBluetooth 4.0 compatible\u003c\/li\u003e\n\u003cli\u003eCompatible with Android devices running 8.0 Oreo (API 26) or later\u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini\u003c\/li\u003e\n\u003cli\u003eMust have an existing sPOD system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method:\u003c\/strong\u003e Thumb Screw Fastening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Amber LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-Year Limited Warranty\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115894091953,"sku":"SLMOD36A","price":535.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/SPDSLMOD36A.jpg?v=1793279672"},{"product_id":"42060-pressure-switch-sealed-85psi-on-105psi-off","title":"Bulldog Winch Pressure Switch Sealed 85psi ON - 105psi OFF","description":"\u003cp\u003e\u003cstrong\u003eBulldog Winch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Switch, Sealed 85 PSI ON - 105 PSI OFF\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor mounting to On-Board Air Tanks\u003c\/li\u003e\n\u003cli\u003eSealed for protecting the switch from the under-body vehicle environment!\u003c\/li\u003e\n\u003cli\u003eThree different ON\/OFF ratings are available\u003c\/li\u003e\n\u003cli\u003e1\/4in NPT threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 85-105psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bulldog Winch","offers":[{"title":"Default Title","offer_id":48115894157489,"sku":"42060","price":17.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/artjksp06dmn2koghsuu.jpg?v=1793279672"},{"product_id":"sl-97-tj-a-spod-sourcelt-w-led-switch-panel-amber","title":"sPOD SourceLT w\/ LED Switch Panel - Amber","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10 foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Amber LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e TJ\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115894714545,"sku":"SL-97-TJ-A","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rcmotxxuqoyvll60mypj.jpg?v=1793279675"},{"product_id":"sl-0918-jk-r-spod-source-lt-w-led-switch-panel-red","title":"sPOD Source LT w\/ LED Switch Panel - Red","description":"\u003cp\u003eThe SourceLT will save hours of wiring \u0026amp; installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 circuits rated at 30 amps at 12.5 VDC per circuit\u003c\/li\u003e\n\u003cli\u003e12-position terminal block (easily attach accessories)\u003c\/li\u003e\n\u003cli\u003eController cable (10 foot) for simple plug-n-play connectivity to the switch controller\u003c\/li\u003e\n\u003cli\u003eIntegrated low voltage cutoff (LVCO) battery protection w\/ optional override\u003c\/li\u003e\n\u003cli\u003eSelf-healing fault protection circuits (from 1.5 to 30amps)\u003c\/li\u003e\n\u003cli\u003eCurrent-sensing MOSFETs controlled by a microprocessor (no fuses \u0026amp; no relays)\u003c\/li\u003e\n\u003cli\u003e50amp auto-resetting circuit breaker\u003c\/li\u003e\n\u003cli\u003eNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket\u003c\/li\u003e\n\u003cli\u003eOperates on 12VDC\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth capabilities for remote control\u003c\/li\u003e\n\u003cli\u003eProtection against overheating, over-current, shorts, reverse polarity and field collapse\u003c\/li\u003e\n\u003cli\u003eOn-demand wireless software updates\/upgrades  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated steel base w\/ built in hardware\u003c\/li\u003e\n\u003cli\u003eSilicone gasket for weatherproofing\u003c\/li\u003e\n\u003cli\u003eSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends\u003c\/li\u003e\n\u003cli\u003eUniversal \u0026amp; vehicle specific mounting options\u003c\/li\u003e\n\u003cli\u003eRobust insulated base and cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSwitch Panel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch panel with six dual lit LED switches (installed and pre-wired)\u003c\/li\u003e\n\u003cli\u003eAll wires are wrapped in high-temp abrasion resistant nylon braided sleeving.\u003c\/li\u003e\n\u003cli\u003eComes with a 10-foot control cable\u003c\/li\u003e\n\u003cli\u003eAluminum panels are formed, welded and powder coated\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Contura switches (certified to IP66\/68 - marine\/harsh environment)\u003c\/li\u003e\n\u003cli\u003eControlled lower pilot light (push button)\u003c\/li\u003e\n\u003cli\u003eCustom laser-etched rockers are available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAuto safe system shutdown when panel is unplugged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Illumination:\u003c\/strong\u003e Red LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Power Distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2009+\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48115894812849,"sku":"SL-0918-JK-R","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/pmj6ovj0ebf2gawnodvy.jpg?v=1793279675"},{"product_id":"56046264ae-mopar-locker-and-sway-bar-switch-panel","title":"Mopar Locker and Sway Bar Switch Panel","description":"\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2011+ Rubicon\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":48115895435441,"sku":"56046264AE","price":111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/bh3nsvdhptn3nddsqjw6.jpg?v=1793279678"},{"product_id":"4602937ac-mopar-oem-swaybar-switch-pod","title":"Mopar OEM Swaybar Switch Pod","description":"\u003cp\u003e\u003cstrong\u003e***Note: Part can be found as reference #4 in image.***\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 Switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Switches:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Lower Dash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2008-09 Rubicon\/Sahara\/X Models\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":48115895533745,"sku":"4602937AC","price":80.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/jwx5pnmln80zndzterow.jpg?v=1793279679"}],"url":"https:\/\/wp4x4.com\/collections\/interior.oembed","provider":"WP4x4","version":"1.0","type":"link"}