{"title":"Fenders","description":null,"products":[{"product_id":"motobilt-high-clearance-rear-inner-fender-for-jl-jlu","title":"MOTOBILT HIGH CLEARANCE REAR INNER FENDER FOR JL\/JLU","description":"\u003cp\u003eDESCRIPTION\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe MB1254 High Clearance Rear Inner Fender is the perfect addition to your Jeep, offering a blend of style and protection. Designed to fit seamlessly with the JL and JLU models, this fender provides more tire clearance then our previous model for bigger 40” to 42” tall tires that we run on our off-road adventures while protecting vital components from damage. \u003c\/p\u003e\n\u003cp\u003eIts sleek design not only enhances the look of your Jeep, but it also provides practical benefits by shielding fuel lines and other important parts from rocks, debris, and trail hazards. The fender bolts in with no trimming required but optional rear fender trimming ensures maximum clearance.\u003c\/p\u003e\n\u003cp\u003eFor a comprehensive upgrade, pair this inner fender with our steel or aluminum rear fender flares, further boosting your vehicle’s resilience and aesthetic appeal.\u003c\/p\u003e\n\u003cp\u003e*Note: Tire fitment will depend on suspension height, bump stops, axle width, and wheel offset. Modify fenderwell opening as needed for your application.\u003c\/p\u003e\n\u003cp\u003eHighlights:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIncreased Tire Clearance:  By installing the new high line fenders it allows for larger 40-42” tall tires to clear the inner fender! The new inner fenders are moved up higher, and further back to provide additional clearance under articulation. For the most tire clearance trimming is recommended. \u003cbr\u003eRear Fender Trimming: Ensure a precise fit by trimming the rear fender opening and allowing for a the maximum tire clearance possible. Trimming is not required but allows for the most clearance.\u003cbr\u003eStock Flare: These can be used with stock outer flares and smaller tires as well allowing you to upgrade to a larger setup in the future.\u003cbr\u003eProtection Against Debris: Safeguards fuel lines from rocks and debris, providing peace of mind on rugged trails.\u003cbr\u003eAttractive Design: Enhances the overall look of your vehicle, adding a sleek and functional aesthetic.\u003cbr\u003eCompatibility: Works seamlessly with our steel rear fenders MB1102 and MB1199 highline or our aluminum rear fenders MB1102-A and MB1199-A highline. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFits:\u003cbr\u003eJeep JL\u003cbr\u003eJeep JLU\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003eMade in the USA: Manufactured in the USA for exceptional quality and durability.\u003cbr\u003eDimensions: Height: 12.5 inches, Width: 36.75 inches, Depth: 8.5 inches.\u003cbr\u003eWeight: 8.5 lbs, providing sturdy protection without adding excessive bulk.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOrder Now:\u003cbr\u003eUpgrade your Jeep’s protection and style with the MB1254 High Clearance Rear Inner Fender. Add it to your cart today, and enjoy the enhanced off-road performance and rugged aesthetic that it brings to your JL or JLU.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44076654887089,"sku":"MB1254","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MB1254-Cob-assembled_1220x_crop_center_b6f6989a-3fba-4e6c-91a9-c2403aa4e7a8.webp?v=1715961498"},{"product_id":"motobilt-crusher-4-front-fenders-for-jeep-jk-jku","title":"MOTOBILT CRUSHER 4\" FRONT FENDERS FOR JEEP JK \/ JKU","description":"\u003cdiv class=\"tabbed-content--tabs tabs-left\"\u003e\u003cbutton class=\"active\"\u003eDESCRIPTION\u003c\/button\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\n\u003cp\u003e\u003cspan\u003eTired of those huge extra wide fenders?  Then set your Jeep JK apart from the rest with these 4 inch wide Jeep JK Front Fenders.  Made from 3\/16” laser cut steel plate they are ready for the toughest trails on earth.  The cutting edge design allows these fenders to fit perfectly and their raw finish means you can match them to your specific needs.  No need to hope they match your setup as you can customize them for the perfect look.  The Motobilt Jeep JK Crusher series front fenders give you that ultra high clearance that you need for big tires but still have the look and protection of a heavy duty steel fender flare.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Motobilt Jeep JK front Crusher fenders are a bolt on design.  Their design does allow an extra 1 ½ inches to be removed from the factory fender well opening to accommodate larger tires if you choose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded are a passenger and driver side front fender flare and all of the necessary mounting hardware for the front of your 2007-2018 Jeep Wrangler JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003cspan mce-data-marked=\"1\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMaterial 3\/16 steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 inch flare\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInner fender not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits 2007-2018 Jeep Wrangler JK or JKU front\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 44lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRelated Products:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFront inner fenders part number MB1070\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44076751945905,"sku":"MB1075-4","price":639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MB1075-4-front-fenders-view-1_1220x_crop_center_3f5b5674-3b60-4800-b6cc-4ffff25eb669.webp?v=1715962955"},{"product_id":"motobilt-rear-inner-fenders-aluminum-for-jeep-jk-jku","title":"MOTOBILT REAR INNER FENDERS ALUMINUM FOR JEEP JK \/ JKU","description":"\u003cdiv class=\"tabbed-content--tabs tabs-left\"\u003e\u003cbutton class=\"active\"\u003eDESCRIPTION\u003c\/button\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\n\u003cp\u003eThe new Motobilt Jeep JK rear aluminum fenders will clean up your Jeep. When you remove the rear plastic inner liner of your Jeep JK you will see your left with large open voids that will pack full of dirt and look horrible. Now the new Motobilt rear inner fenders will install into the rear wheel well of your Jeep JK giving it a clean custom look. These inner fenders are made from 16 guage aluminum that is cnc laser cut and formed in house. The fenders come with the necessary mounting hardware. The are a 3 piece design.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK rear aluminum inner fenders\u003c\/li\u003e\n\u003cli\u003e16 guage aluminum\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and formed in house\u003c\/li\u003e\n\u003cli\u003e3 piece design\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight = 15lbs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44077173735601,"sku":"MB1071","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mb1071-3_1220x_crop_center_d1026435-f446-4826-9223-d75e8d9f246d.webp?v=1715973338"},{"product_id":"motobilt-crusher-2-front-fenders-for-jeep-jk-jku","title":"MOTOBILT CRUSHER 2\" FRONT FENDERS FOR JEEP JK \/ JKU","description":"\u003cdiv class=\"tabbed-content--tabs tabs-left\"\u003e\u003cbutton class=\"active\"\u003eDESCRIPTION\u003c\/button\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\n\u003cp\u003e\u003cspan\u003eTired of those huge extra wide fenders?  Then set your Jeep JK apart from the rest with these 2 inch wide Jeep JK Front Fenders.  Made from 3\/16” laser cut steel plate they are ready for the toughest trails on earth.  The cutting edge design allows these fenders to fit perfectly and their raw finish means you can match them to your specific needs.  No need to hope they match your setup as you can customize them for the perfect look.  The Motobilt Jeep JK Crusher series front fenders give you that ultra high clearance that you need for big tires but still have the look and protection of a heavy duty steel fender flare.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Motobilt Jeep JK front Crusher fenders are a bolt on design.  Their design does allow an extra 1 ½ inches to be removed from the factory fender well opening to accommodate larger tires if you choose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded are a passenger and driver side front fender flare and all of the necessary mounting hardware for the front of your 2007-2018 Jeep Wrangler JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003cspan mce-data-marked=\"1\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMaterial 3\/16 steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 inch flare\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInner fender not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits 2007-2018 Jeep Wrangler JK or JKU front\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 44lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRelated Products:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFront inner fenders part number MB1070\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44077177471153,"sku":"MB1075-2","price":639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MB1075-Pair-1_1220x_crop_center_896292be-c5c9-4b90-915a-3fd7d51681ed.webp?v=1715973640"},{"product_id":"motobilt-crusher-2-rear-fenders-for-jeep-jk-jku","title":"MOTOBILT CRUSHER 2\" REAR FENDERS FOR JEEP JK \/ JKU","description":"\u003cdiv class=\"tabbed-content--tabs tabs-left\"\u003e\u003cbutton class=\"active\"\u003eDESCRIPTION\u003c\/button\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\n\u003cp\u003e\u003cspan\u003eTired of those huge extra wide fenders?  Then set your Jeep JK apart from the rest with these 2 inch wide Jeep JK Rear Fenders.  Made from 3\/16” laser cut steel plate they are ready for the toughest trails on earth.  The cutting edge design allows these fenders to fit perfectly and their raw finish means you can match them to your specific needs.  No need to hope they match your setup as you can customize them for the perfect look.  The Motobilt Jeep JK Crusher Series front fenders give you that ultra high clearance that you need for big tires but still have the look and protection of a heavy duty steel fender flare.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eThe Motobilt Jeep JK Rear Crusher Series Fenders are a bolt on design.  Their design does allow an extra 1 ½ inches to be removed from the factory fender well opening to be removed from the front and another 1 1\/2 inches in the back to accommodate larger tires if you choose.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded are a passenger and driver side rear fender flare and all of the necessary mounting hardware for the front of your 2007-2018 Jeep Wrangler JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMaterial 3\/16 steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 inch flare\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInner fender not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits 2007-2018 Jeep Wrangler JK or JKU rear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 40lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRelated Parts:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eJK rear inner fenders part number MB1071\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44077181042865,"sku":"MB1076-2","price":639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MB1076-Pair-1_1220x_crop_center_cc8375ed-8227-4545-af21-3ae2d02e15eb.webp?v=1715973884"},{"product_id":"motobilt-front-inner-fenders-aluminum-for-jeep-jk-jku","title":"MOTOBILT FRONT INNER FENDERS ALUMINUM FOR JEEP JK \/ JKU","description":"\u003cdiv class=\"tabbed-content--tabs tabs-left\"\u003e\u003cbutton class=\"active\"\u003eDESCRIPTION\u003c\/button\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tabbed-content--content rte text-left active\"\u003e\n\u003cp\u003eThe Motobilt Jeep JK aluminum inner front fenders look amazing. The new inner fenders provide a great way to protect the engine compartment of your Jeep. They also are a great way to customize your ride. These fenders are laser cut and CNC formed in house for a precise fit. They come with the necessary mounting hardware and work with most aftermarket fenders. They are made from 16 guage aluminum so they will not rust and are extremely light weight. The main structure is a 2 piece design with a 3rd vented panel. The fenders come un painted so you can paint them the color of your choice or leave them raw.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK front inner aluminum fenders\u003c\/li\u003e\n\u003cli\u003elaser cut and CNC formed in house for a precise fit\u003c\/li\u003e\n\u003cli\u003e16 guage aluminum\u003c\/li\u003e\n\u003cli\u003e2 piece design with a 3rd vented panel\u003c\/li\u003e\n\u003cli\u003ethey will not rust and are extremely light weight\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnpainted so you can paint them the color of your choice or leave them raw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44077218627761,"sku":"MB1070","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/MB1070-COB-2_1220x_crop_center_4584626e-9316-4963-b6a9-aa2d1d65eb05.webp?v=1715974261"},{"product_id":"rugged-ridge-max-terrain-fender-flares-jl","title":"Rugged Ridge Max Terrain Fender Flares | JL","description":"\u003cdiv data-v-f1cca2b5=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed out of durable injection-molded thermoplastic\u003c\/li\u003e\n\u003cli\u003eBlack dual-textured finish\u003c\/li\u003e\n\u003cli\u003eClassic flat-style profile\u003c\/li\u003e\n\u003cli\u003eProvides extra-wide tire coverage \u0026amp; increased clearance\u003c\/li\u003e\n\u003cli\u003eProtects your Jeep from flying debris\u003c\/li\u003e\n\u003cli\u003eResistant to cracking, warping, \u0026amp; impact\u003c\/li\u003e\n\u003cli\u003eIncludes integrated two-color daytime running light tubes\u003c\/li\u003e\n\u003cli\u003eComes in set of 4 for front \u0026amp; rear coverage\u003c\/li\u003e\n\u003cli\u003eEasy, bolt-on installation\u003c\/li\u003e\n\u003cli\u003eFive-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"description\" data-v-f1cca2b5=\"\"\u003e\n\u003cdiv data-v-f1cca2b5=\"\"\u003e\n\u003cp\u003eThe Rugged Ridge Max-Terrain Fender Flares find inspiration from the classic flat-fender styling featured on Jeeps’ earliest models and blend it with a refined rendition of the current JL factory flare to take your JL’s off-road capability to the MAX!\u003c\/p\u003e\n\u003cp\u003eThe Max-Terrain Fender Flares are constructed from a durable injection-molded thermoplastic, chosen for its flexibility and impact-resistant qualities. The flares mount in a position that is high-to-the-body, delivering greater tire clearance for maximum suspension travel while off-road. The rear mating surface of the flares have been carefully contoured to help alleviate the inherent trapping of stones and debris against those delicate painted surfaces.\u003c\/p\u003e\n\u003cp\u003eThe Max-Terrain Flares feature a distinct dual-textured finish that blends nicely with JL factory trim, or can even be prepped \u0026amp; painted for those who prefer a color-matched theme. Integrated two-color DRL tubes (Daytime Running Lights) are cradled inside the front support brace and highlight the flares leading edge, adding visual appeal while also improving on-road visibility. Installation is simplified with the included hardware and requires no drilling.\u003c\/p\u003e\n\u003cp\u003eGet on the trails today with the Rugged Ridge Max-Terrain Fender Flares!\u003c\/p\u003e\n\u003cdiv class=\"tab-section -hideTitle\" id=\"scrollTarget-description\" data-v-7055c5df=\"\"\u003e\n\u003cdiv data-v-f1cca2b5=\"\"\u003e\n\u003cdiv class=\"prop-65 relative inline-block font-bold mt-4 mb-3 group\" data-v-f1cca2b5=\"\"\u003eCalifornia Residents: \u003cspan class=\"font-normal underline cursor-pointer\" data-v-f1cca2b5=\"\"\u003eProp 65 Warning\u003c\/span\u003e\n\u003cdiv class=\"absolute left-0 right-0 bottom-full hidden group-hover:block\" data-v-f1cca2b5=\"\"\u003e\u003cimg src=\"https:\/\/realtruck.com\/images\/prop65.svg\" width=\"271\" height=\"56\" alt=\"May cause cancer\" loading=\"lazy\" data-v-f1cca2b5=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-section\" id=\"scrollTarget-install\" data-v-7055c5df=\"\"\u003e\n\u003ch2 class=\"sectionTitle text-gray-darkest capitalize\" data-v-7055c5df=\"\"\u003eInstall\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Max Terrain Fender Flares by Rugged Ridge have an easy, bolt-on installation that can be done in your garage. All of the hardware is included in the package, along with the installation guide. Only basic tools are needed. For additional information please give us a call.\u003c\/p\u003e\n\u003cdiv class=\"overflow-hidden leading-5 my-3\"\u003e\n\u003cp\u003e\u003cimg class=\"float-left mr-3\" src=\"https:\/\/realtruck.com\/images\/file-pdf.svg\" alt=\"pdf\" width=\"16\" height=\"16\" loading=\"lazy\"\u003e\u003ca href=\"https:\/\/static.thiecommerce.com\/assets\/production\/rugged-ridge-11640_51_pdf\/1cef61cd0616e356b71179f4b1d43a58.pdf\" target=\"_blank\"\u003e\u003cspan\u003eRugged Ridge 11640.51 Installation Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":44245107212465,"sku":"11640.51","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fe93c1ec7d11833a3900390b72ba9bff.webp?v=1718293532"},{"product_id":"rugged-ridge-front-inner-fender-liners-aluminum-black-jl","title":"Rugged Ridge Front Inner Fender Liners, Aluminum - Black  - JL","description":"\u003cdiv class=\"[\u0026amp;_table]:mb-[15px] [\u0026amp;_table]:mt-[15px] [\u0026amp;_table]:bg-white [\u0026amp;_table]:border [\u0026amp;_table]:border-black [\u0026amp;_table]:p-[6px] [\u0026amp;_th]:bg-[#eee] [\u0026amp;_th]:border [\u0026amp;_th]:border-black [\u0026amp;_th]:p-[6px] [\u0026amp;_td]:bg-white [\u0026amp;_td]:border [\u0026amp;_td]:border-black [\u0026amp;_td]:p-[6px]\"\u003e\n\u003ch2 id=\"scrollTarget-description\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eRugged Ridge Aluminum Inner Fender Liners are a crucial element to building your off-road beast. Crafted from lightweight 1\/16-inch aluminum, CNC laser cut and bent for a perfect fit, these inner fenders protect your engine compartment from mud and debris and look phenomenal doing it. Designed to work with trimmed OE flares and most aftermarket fenders, these inner fenders give you that additional clearance you’re looking for when running bigger tires. Integrated splash shields offer full coverage that surpasses the flimsy factory liner, while a durable black powder coated finish makes sure things remain stunning, even under layers of mud \u0026amp; muck. Rugged Ridge Aluminum Inner Fender Liners install easily using factory mounting locations with no drilling required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed out of lightweight aluminum plate\u003c\/li\u003e\n\u003cli\u003eBrake formed and engineered for precise fit\u003c\/li\u003e\n\u003cli\u003eAvailable in corrosion resistant black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eFive-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":44909662830769,"sku":"11615.61","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/f6547e79ab2785177e4dbcfea79047e2.jpg?v=1732129428"},{"product_id":"rugged-ridge-rear-aluminum-inner-fender-liners-black-jl","title":"Rugged Ridge Rear Aluminum Inner Fender Liners - Black - JL","description":"\u003cdiv class=\"[\u0026amp;_table]:mb-[15px] [\u0026amp;_table]:mt-[15px] [\u0026amp;_table]:bg-white [\u0026amp;_table]:border [\u0026amp;_table]:border-black [\u0026amp;_table]:p-[6px] [\u0026amp;_th]:bg-[#eee] [\u0026amp;_th]:border [\u0026amp;_th]:border-black [\u0026amp;_th]:p-[6px] [\u0026amp;_td]:bg-white [\u0026amp;_td]:border [\u0026amp;_td]:border-black [\u0026amp;_td]:p-[6px]\"\u003e\n\u003ch2 id=\"scrollTarget-description\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eRugged Ridge Aluminum Inner Fender Liners are a crucial element to building your off-road beast. Crafted from lightweight 14-gauge aluminum, CNC laser cut and bent for a perfect fit, these inner fenders protect your Jeep from mud and debris and look phenomenal doing it. Designed to work with trimmed OE flares and most aftermarket fenders, these inner fender liners offer maximum coverage while giving you that additional clearance you’re looking for when running bigger tires. Engineered to offer protection that far surpasses those flimsy factory liners with a durable satin black powder coated finish makes sure things remain stunning, even under layers of mud \u0026amp; muck. Rugged Ridge Aluminum Inner Fender Liners install easily using factory mounting locations with no drilling required. Stainless Steel mounting hardware is included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed out of lightweight aluminum plate\u003c\/li\u003e\n\u003cli\u003eBrake formed and engineered for precise fit\u003c\/li\u003e\n\u003cli\u003eAvailable in corrosion resistant black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eFive-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":44909770604721,"sku":"11615.62","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/6e45ae2692d5348b27916748d10e78de.jpg?v=1732130743"},{"product_id":"motobilt-front-fender-flares-bare","title":"MOTOBILT FRONT FENDER FLARES - BARE","description":"\u003cp\u003eMotobilt Front Fenders  are the answer to flimsy factory plastic fenders. The Motobilt fenders are made from 3\/16” laser cut and formed steel plate providing a fender flare ready for the toughest trails on earth. The cutting edge design allows the fenders to fit perfectly and their raw finish means you can match them to your specific color needs. The Motobilt Rear fenders for your Jeep give you more clearance needed for larger tires providing protection and looks to set your Jeep JL apart from others. \u003c\/p\u003e\n\n\u003cp\u003eThe Motobilt Front fenders are a bolt on design fitting both the 4 door and 2 door Jeep JL 2018-current. Keep in mind the JK was also manufactured in 2018 and the fenders will not fit the JK. The design of the front fender includes a small LED turn signal light.  The factory front fenders extend far out on the front corners of the Jeep often times making them prone to hit trees and other obstacles when off-roading. The Motobilt design tapers the fenders in as they go forward on the Jeep keeping them tighter to the Jeep. \u003c\/p\u003e\n\n\u003cp\u003eIncluded are a passenger and driver side front fender flare and all of the necessary mounting hardware for the front of your Jeep.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eInstallation Note: The fender flares require drilling holes and trimming factory tabs on the front of the Jeep to install.  You will need to repaint the areas where you trim.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eincludes driver and passenger side fenders\u003cbr\u003e\n\tIncludes Qty (2) LED turn signal lights\u003cbr\u003e\n\tIncludes mounting hardware\u003cbr\u003e\n\tIncludes Motobilt aluminum vent trim panels \u003cbr\u003e\n\tMade in house at Motobilt in the USA\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":46582478373041,"sku":"MB1101","price":639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/kxp8c8nnuh2aa9zbpcey.jpg?v=1768188247"},{"product_id":"quake-led-slim-drl-fender-chop-kit-w-rgb","title":"QUAKE LED SLIM DRL FENDER CHOP KIT W\/RGB","description":"\u003cp\u003eProviding enhanced visibility for a safer driving experience with a plug and play installation. These premium DRL lights provide a bulb-free design that is waterproof and extremely durable against potential trail damage. Constructed with a military grade, fiberglass reinforced plastic housing and polycarbonate lenses that will not yellow. Giving optimum protection against the abuse of road debris, and impact from branches on the trail. Sealed with reinforcement grade epoxy that protects the innards from corrosion and moisture. Engineered with advanced circuitry to protect against voltage spikes. Quake offers a quality that is built to last.\u003c\/p\u003e\n\n\u003cp\u003eGain additional tire clearance while adding style and upper fender flare support to your Jeep Wrangler JL Sahara or Gladiator JT Overland with the Quake LED Slim Chop DRL Kit with Sequential Turn Signals and RGB Accenting. Providing for a safer driving experience while turning heads at the same time.\u003c\/p\u003e\n\n\u003cp\u003eThese premium DRL lights are waterproof and their extremely durable all metal construction design provides against potential trail damage. Over-engineered with highly advanced circuitry to protect against voltage spikes. Installs without any dash errors or hyper flashing.\u003c\/p\u003e\n\n\u003cp\u003eA simple, complete plug and play installation with all necessary hardware and instructions. Quake offers an off-road construction and quality that is built to last. No cutting or splicing required. Sold as a pair. Designed for Sahara\/Overland fender flares only.\u003c\/p\u003e\n\n\u003cp\u003eFITS\u003c\/p\u003e\n\n\n\t\u003cp\u003e2018+ JL Sahara\u003cbr\u003e\n\t2018-2019 JL Moab\u003cbr\u003e\n\t2020+ JT Overland\u003cbr\u003e\n\t2020+ JT Sport S Max Tow\u003c\/p\u003e\n\n\n\u003cp\u003eDetails:\u003c\/p\u003e\n\n\u003cp\u003eSequential Switchback Turn Signal: The amber sequential turn signals mark the direction of your turn signal for others to follow. It has three phases of amber lights that enlarge as they flash. Then, all the lights extinguish at the same time and the sequence is repeated over again. This unique feature will make your Jeep stand out and creates a safer driving experience.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eLow Profile DRL Chop Kit with Sequential Switchback Turn Signals, Amber Side Markers \u0026amp; RGB\u003cbr\u003e\n\tDeletes lower Fender while adding upper Fender support\u003cbr\u003e\n\t100% Plug in Play design! (No cutting or splicing required)\u003cbr\u003e\n\tWill fit both Halogen or LED Jeep JL or JT models\u003cbr\u003e\n\tNo 3D printed lens which are easy to crack and fade yellow\u003cbr\u003e\n\tExtremely strong steel bracket design\u003cbr\u003e\n\tNo Dashboard Messages, Errors or Hyper-flashing\u003cbr\u003e\n\tOperating voltage of 12VDC\u003cbr\u003e\n\tDOT and SAE Compliant\u003cbr\u003e\n\tVery low power consumption\u003cbr\u003e\n\tBracket Material: Laser Cut Precision Steel\u003cbr\u003e\n\tLens Material: Impact Resistant Poly-Carbonate\u003cbr\u003e\n\tIP67 Rating (protection against dust\/water ingress)\u003cbr\u003e\n\tLong life expectancy of over 50,000+ hours\u003cbr\u003e\n\tQuake Construction for the Ultimate Performance On \u0026amp; Off-road\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Quake LED","offers":[{"title":"Default Title","offer_id":46631395164337,"sku":"Part # QTE1180We price match! Call 866-601-5340!\n\n    We Price Match","price":527.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fdxafhpo3vsjd2j7mfo7.jpg?v=1770011544"},{"product_id":"rugged-ridge-max-terrain-front-and-rear-fender-flare-set","title":"Rugged Ridge Max Terrain Front and Rear Fender Flare Set","description":"\u003cp\u003eThe Rugged Ridge Max-Terrain Fender Flares find inspiration from the classic flat-fender styling featured on Jeeps’ earliest models and blend it with a refined rendition of the current Jeep factory flare, combining to take your JL’s off-road capability to the MAX! Max-Terrain Fender Flares are constructed from a durable injection-molded thermoplastic, chosen for its flexibility and impact-resistant qualities. The flares mount in a position that is high-to-the-body, delivering greater tire clearance for maximum suspension travel while off-road.\u003c\/p\u003e\n\n\u003cp\u003eThe rear mating surface of the flares have been carefully contoured to help alleviate the inherent trapping of stones and debris against those delicate painted surfaces. The Max-Terrain Flares feature a distinct dual-textured finish that blends nicely with JL factory trim or can even be prepped \u0026amp; painted for those who prefer a color-matched theme. Integrated two-color DRL tubes (Daytime Running Lights) are cradled inside the front support brace and highlight the flares leading edge, adding visual appeal while also improving on-road visibility. Installation is simplified with the included hardware and requires no drilling.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631395197105,"sku":"Part # 11640.51We price match! Call 866-601-5340!\n\n    We Price Match","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/bdcuoqbbvtfruedtozjk.jpg?v=1770011545"},{"product_id":"artec-industries-front-inner-fenders-vented","title":"ARTEC INDUSTRIES FRONT INNER FENDERS - VENTED","description":"\u003cp\u003eArtec Industries is excited to announce our new Front Inner Fenders for 3.0L DIESEL JL Wrangler, 392 Wrangler and 3.0L DIESEL JT Gladiators. These aluminum fenders not only protect your engine compartment from dirt and debris but do it in style. Our proprietary process of stamping our logo not only adds an additional element of style not seen in the industry but also increases the rigidity of the whole inner fender. In addition, the laser cut vents keep your engine compartment cool and don't require you to bolt on an extra piece of mesh material. All this at a PHENOMENAL PRICE and manufactured in-house which means it’s MADE IN THE USA! \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFeatures:       \u003c\/p\u003e\n\n\n\t\u003cp\u003eDesigned specifically for 3.0L ECODIESEL JL and JT*\u003cbr\u003e\n\tFits 392 Hemi JL Wrangler\u003cbr\u003e\n\tAllows use of tires up to 37\" with suspension lift*\u003cbr\u003e\n\tLightweight 1\/16\" Aluminum construction\u003cbr\u003e\n\tCNC laser cut and CNC bent for precise fit\u003cbr\u003e\n\tCan easily be trimmed for use with coilovers or bumpstops without ruining the vented area\u003cbr\u003e\n\tCompatible with Trimmed OEM fenders\u003cbr\u003e\n\tLaser cut venting means no extra pieces of material to bolt on\u003cbr\u003e\n\tTwo main piece construction for lower cost of shipping\u003cbr\u003e\n\tPressed PEM nuts on seam between pieces for easy installation\u003cbr\u003e\n\tCovers gap between outer body sheetmetal and inner body sheetmetal\u003cbr\u003e\n\tExtra bottom flange directly behind wheel prevents grime from getting inside the gaps in the undercarriage sheetmetal\u003cbr\u003e\n\tIncludes Passenger and Driver side inner fenders\u003cbr\u003e\n\tShipped bare unfinished aluminum for decreased cost and ability for you to paint or powder coat to fit your style**\u003c\/p\u003e\n\n\n\u003cp\u003e*FOR VEHICLES WITH LARGE TIRES (39\"+), WE RECOMMEND USING NORMAL INNER FENDERS AND RELOCATING THE WINDOW WASHER FLUID TANK IN THE DRIVER SIDE WHEEL WELL. THIS TANK PREVENTS USING LARGER TIRES AND ACHIEVING FULL AXLE ARTICULATION. WE RECOMMEND UP TO 37\" TIRES USING THESE FENDERS.\u003c\/p\u003e\n\n\n\u003cp\u003eNOTE: While all precautions are made to ensure the aluminum surface is protected, small scratches from either the raw material from the factory, the manufacturing process, or the shipping process may be present in this UNFINISHED product. We recommend you finish this product with either painting, powder coating or another similar process and prepare the surface prior to finishing as you would normally to remove any minor blemishes.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eMounts to OEM holes on subframe plus additional holes to be drilled. See instructions for hole locations to determine if modification will be necessary to install with aftermarket fenders.\u003c\/p\u003e\n\n\u003cp\u003e**While aluminum is rust resistant, it is recommended to have some type of coating for long term corrosion protection.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46631395262641,"sku":"Part # JL5113We price match! Call 866-601-5340!\n\n    We Price Match","price":362.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ufouus2fqelrnvwuynqb.jpg?v=1770011547"},{"product_id":"fabtech-rear-tube-fenders-steel","title":"FABTECH REAR TUBE FENDERS - STEEL","description":"\u003cp\u003eFabtech’s Jeep JL Rear Steel Tube Fenders have been designed to allow the installation of oversized tires for offroad use while providing additional protection to the vehicle. The Tube Fenders directly replace the factory fenders bolting into the same mounting holes for an easy installation.\u003c\/p\u003e\n\n\u003cp\u003eThese rugged Tube Fenders are constructed of 1.50 OD x .095 wall steel tubing with a .060 thick steel top plate. This construction is extremely durable in absorbing side impacts from large objects when driving in tight offroad conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe JL Tube Fenders are a narrow design compared to the factory fender. The rear fenders measure 4.5\" wide.\u003c\/p\u003e\n\n\u003cp\u003eFabtech Jeep JL Tube Fenders come finished with a textured black powdercoat.\u003cbr\u003e\nThese high quality fenders are American made with the proper fit and finish that you have come to expect from Fabtech.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":46631395295409,"sku":"Part # FTS24213We price match! Call 866-601-5340!\n\n    We Price Match","price":723.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mi4lpdlul12ogb9i9r7w.jpg?v=1770011548"},{"product_id":"fabtech-front-inner-fender-kit","title":"FabTech Front Inner Fender Kit","description":"\u003cp\u003eThese inner Jeep fenders have been designed to replace the factory plastic liners and mate to Fabtech Tube Fenders for a complete fender upgrade. The mill finish 6061 aluminum is formed to cover the entire inner wheel well opening of Wranglers and Gladiators, eliminating gaps where mud or debris can enter. They allow clearance for 37\" tires with a 3\" lift and 40\" tires with a 5\" lift.\u003c\/p\u003e\n\n\u003cp\u003eThey come with a perforated vent panel that allows engine bay heat to escape to help keep your Jeep running cool on those hot summer trail days.\u003c\/p\u003e\n\n\u003cp\u003eEach fender comes with removable plastic film to protect the striking mill finish during installation. The included nut tabs allow for an easy install with no rivenuts required.\u003c\/p\u003e\n\n\u003cp\u003eThe appearance of these inner fenders is just stunning and will complement your Jeep with Fabtech Tube Fenders for a complete custom look that’s sure to get some attention.\u003c\/p\u003e\n\n\n\t\u003cp\u003eMill Finish 6061 Aluminum\u003cbr\u003e\n\tForm fitted for use with Fabtech Tube Fenders\u003cbr\u003e\n\tAllows use of 37\" tires with 3\" lifts and 40\" tires with 5\" lifts\u003cbr\u003e\n\tPerforated vent panel on fronts help reduce engine bay heat\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":46631395328177,"sku":null,"price":410.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ureuvgiljayiuqhhcmme.jpg?v=1770011549"},{"product_id":"evo-manufacturing-rear-kspec-highline-tube-fenders-bare","title":"EVO MANUFACTURING REAR KSPEC HIGHLINE TUBE FENDERS - BARE","description":"\u003cp\u003eThe EVO Manufacturing KSPEC Highline Tube Fenders ideally complement and match the Jeep Wrangler JL bodylines with a fully rolled tube fender, structural gusseting and increased tire clearance.\u003c\/p\u003e\n\n\u003cp\u003eStyle and Function\u003c\/p\u003e\n\n\u003cp\u003eThe EVO MFG KSPEC Highline Tube Fenders give a clean finished look to your JL while raising and widening the fender openings. Keeping with the bodylines, the tubing is fully rolled with virtually no straight sections to accurately follow the body fender depression, giving a seamless and finished appearance. No bump bending or offset plate transitions. Just clean flowing bodylines. 3.5\" wide from the body for tire coverage. Larger wheel opening gives increased tire clearance for larger tires and lower lift requirements. The bottom of the fenders are 3.25\" higher than stock Rubicon flares and 5\" higher than stock sport flares. Able to fit 40s with 2.5\" lift. Yep.\u003c\/p\u003e\n\n\u003cp\u003eConstruction\u003c\/p\u003e\n\n\u003cp\u003eThe EVO MFG KSPEC Highline Tube Fenders are constructed of a combination of 3\/16” and 1\/8” Steel Plate with fully radius rolled 1.5” x .120” steel tubing for optimal strength and bodyline contouring. To increase structural integrity, the fenders include bracing to insure a rigid and structural fender set. Stainless steel mounting hardware included.\u003c\/p\u003e\n\n\n\t\u003cp\u003eAvailable in raw steel for prep and paint.\u003cbr\u003e\n\t3\/4\" LED Turn Signal Included (Installer Wired)\u003cbr\u003e\n\tAlways test fit parts before finishing\/painting.\u003cbr\u003e\n\tWorks in combination with or without all EVO MFG Inner Fender Liners.\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631395360945,"sku":"Part # 3199We price match! Call 866-601-5340!\n\n    We Price Match","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hktczyckf7zjs0xapmvz.jpg?v=1770011550"},{"product_id":"combat-off-road-black-aluminum-fender-kit-front","title":"COMBAT OFF ROAD BLACK ALUMINUM FENDER KIT - FRONT","description":"\u003cp\u003eIf you're looking for front-only fenders for your 2018+ Jeep Wrangler JL\/JLU, Combat Off Road also offers the Full Assault Fenders in a front-only configuration. These fenders provide the same strength, functionality, and style as the full set, but are designed specifically for the front of your Jeep.\u003c\/p\u003e\n\n\u003cp\u003eLike the full set, the front-only fenders are constructed from 6063 aluminum and feature the thickest tube wall and top plate on the market, providing the same durability and corrosion resistance. They also offer the same extra clearance for bigger tires and more flex, and have a narrower profile for better trail navigation.\u003c\/p\u003e\n\n\u003cp\u003eThe front-only fenders come equipped with three wire LED marker lights, stainless steel hardware, and a removable, customizable logo. They are also available in black high UV load powder coat.\u003c\/p\u003e","brand":"Combat Off Road","offers":[{"title":"Default Title","offer_id":46631395393713,"sku":"Part # 25-1076We price match! Call 866-601-5340!\n\n    We Price Match","price":624.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/vhiiys47vpwskka1zhg7.jpg?v=1770011551"},{"product_id":"evo-manufacturing-front-kspec-highline-tube-fenders-bare","title":"EVO MANUFACTURING FRONT KSPEC HIGHLINE TUBE FENDERS - BARE","description":"\u003cp\u003eThe EVO Manufacturing KSPEC Highline Tube Fenders ideally complement and match the Jeep Gladiator JT bodylines with a fully rolled tube fender, structural gusseting and increased tire clearance.\u003c\/p\u003e\n\n\u003cp\u003eStyle and Function\u003c\/p\u003e\n\n\u003cp\u003eThe EVO MFG KSPEC Highline Tube Fenders give a clean finished look to your JT while raising and widening the fender openings. Keeping with the bodylines, the tubing is fully rolled with virtually no straight sections to accurately follow the body fender depression, giving a seamless and finished appearance. No bump bending or offset plate transitions. Just clean flowing bodylines. 3.5\" wide from the body for tire coverage. Larger wheel opening gives increased tire clearance for larger tires and lower lift requirements. The bottom of the fenders are 3.25\" higher than stock Rubicon flares and 5\" higher than stock sport flares. Able to fit 40s with 2.5\" lift. Yep.\u003c\/p\u003e\n\n\u003cp\u003eConstruction\u003c\/p\u003e\n\n\u003cp\u003eThe EVO MFG KSPEC Highline Tube Fenders are constructed of a combination of 3\/16” and  1\/8” Steel Plate with fully radius rolled 1.5” x .120” steel tubing for optimal strength and bodyline contouring. To increase the structural integrity, the fenders include bracing to insure a rigid and structural fender set. Stainless steel mounting hardware included.\u003c\/p\u003e\n\n\n\t\u003cp\u003e3\/4\" LED Turn Signal Included (Installer Wired)\u003cbr\u003e\n\tAvailable in raw steel for prep and paint.\u003cbr\u003e\n\tAlways test fit parts before finishing\/painting.\u003cbr\u003e\n\tWorks in combination with or without all EVO MFG Inner Fender Liners.\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631395426481,"sku":"Part # 3198We price match! Call 866-601-5340!\n\n    We Price Match","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/tgtanjuuqns4xrl6cuoh.jpg?v=1770011553"},{"product_id":"evo-manufacturing-front-vented-aluminum-inner-fenders-for-coilover-suspensions-black-powder-coat","title":"EVO MANUFACTURING FRONT VENTED ALUMINUM INNER FENDERS FOR COILOVER SUSPENSIONS – BLACK POWDER COAT","description":"\u003cp\u003eEVO MFG’s front vented inner fender liners for standard coil spring suspension lifts clean up the wheel wells while also protecting vital parts in the engine bay from foreign debris. Made in the USA from raw 16 gauge aluminum alloy offers strength, protection and a very low weight. The incorporation of vented backing plates allow heat to escape the engine bay for when you are pushing your Jeep to its limits while also allowing for custom painting options. Using brake formed, precision laser cut panels achieves a premium fitment and appearance for all JL\/JLU and JT Gladiator models. Engineered for quick and easy install and complete with all parts necessary for both driver and passenger inner fender liners, you will be back on the trails in no time!\u003c\/p\u003e\n\n\u003cp\u003eNOTE: Due to the Diesel\/392 Washer fluid reservoir location and variables of tire size, axle width wheel backspacing etc. Tire size clearance may be limited with the install of these liners.  Vehicles with air\/hydraulic\/speed bumpstops may require trimming to liners \u003c\/p\u003e\n\n\u003cp\u003eSome reservoir shocks may require minor trimming to liners.\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631395459249,"sku":"Part # 3098VBWe price match! Call 866-601-5340!\n\n    We Price Match","price":430.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/xcmxzx2pxhnlmp3csjlz.jpg?v=1770011554"},{"product_id":"bushwacker-fender-flares-hyperform-4pc-set","title":"BUSHWACKER FENDER FLARES HYPERFORM, 4PC SET","description":"\u003cp\u003eBushwacker drives you to push the boundaries with the forceful presence of HyperForm Fender Flares, a fearless new design conceived to blend the style of a flat fender with the intensity of a high clearance flare to take your Jeep’s off-road abilities to another level.\u003c\/p\u003e\n\n\u003cp\u003eHyperForm Fender Flares are constructed from a unique thermoplastic compound that offers the same exceptional flexibility that’s made Bushwacker famous. And while durability is good, it’s even better when it accompanies capability. So we made sure to mount the HyperForm flare high \u0026amp; tight to the body and out of harms way, with a refined contour to the flares back edge- no more trapped stones and debris grinding against your precious paint!\u003c\/p\u003e\n\n\u003cp\u003eWhile the HyperForm was built to perform on the trail, it’s got the looks that make it at home on the streets just as well, with a sharp, dual-textured finish that combines well with the Wrangler’s OE trim and cutting-edge DRLs with dual-output LEDs that provide a cool, classy accent that adds visibility and enhances safety. And with a simple, no-drill installation and 5-year warranty, HyperForm Fender Flares are engineered to perform.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":46631395492017,"sku":"Part # 11950-07We price match! Call 866-601-5340!\n\n    We Price Match","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/xcsfn2fm5lr9y2bs0zqc.jpg?v=1770011556"},{"product_id":"bushwacker-flat-style-fender-flares-black","title":"BUSHWACKER FLAT STYLE FENDER FLARES, BLACK","description":"\u003cp\u003eBe ready for anything - equip your Jeep Wrangler JL with Bushwacker Flat Style Fender Flares. They're the first and only flat style flares made to absorb impact, using our proprietary Dura-Flex® 2000 TPO - the thickest, most flexible material available. Flat Style Fender Flares maximize your tire coverage and wheel articulation for severe off-road use. Yet they're carefully engineered to install with a minimum of extra tools and bodywork. For example, our mounting brackets bolt straight onto your Jeep for added strength and simpler fitting.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":46631395524785,"sku":"Part # 10923-07We price match! Call 866-601-5340!\n\n    We Price Match","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/wnizeaxljvap5kffn2ln.jpg?v=1770011558"},{"product_id":"go-rhino-front-inner-fender-liners","title":"GO RHINO FRONT INNER FENDER LINERS","description":"\u003cp\u003eJeep Front Inner Fender Liners, Black Textured Powder coated Aluminum, Pair. Wheel well liners feature hex mesh vents to allow airflow to engine while protecting vehicle from rocks and debris inside the wheel well.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eManufactured from high grade aluminum\u003cbr\u003e\n\tInstallation Hardware Included\u003cbr\u003e\n\tBlack textured powder coat finish with a 5 year warranty\u003c\/p\u003e","brand":"Go Rhino","offers":[{"title":"Default Title","offer_id":46631395557553,"sku":"Part # 702011TWe price match! Call 866-601-5340!\n\n    We Price Match","price":344.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/m56bxzxc40aa4baqa3zh.jpg?v=1770011559"},{"product_id":"evo-manufacturing-front-vented-aluminum-inner-fenders-black","title":"EVO MANUFACTURING FRONT VENTED ALUMINUM INNER FENDERS - BLACK","description":"\u003cp\u003eEVO MFG’s front vented inner fender liners for standard coil spring suspension lifts clean up the wheel wells while also protecting vital parts in the engine bay from foreign debris. Made in the USA from raw 16 gauge aluminum alloy offers strength, protection and are very low weight. The incorporation of vented backing plates allow heat to escape the engine bay for when you are pushing your Jeep to its limits while also allowing for custom painting options.\u003c\/p\u003e\n\n\u003cp\u003eUsing brake formed, precision laser cut panels achieves a premium fitment and appearance for all JL\/JLU and JT Gladiator models. Engineered for quick and easy install and complete with all parts necessary for both driver and passenger inner fender liners, you will be back on the trails in no time!  Vehicles with air\/hydraulic\/speed bump stops may require trimming to liners.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eFor Double Throwdown Suspensions\u003cbr\u003e\n\tBlack powder coated\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631395590321,"sku":"Part # 3099VBWe price match! Call 866-601-5340!\n\n    We Price Match","price":430.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hvr3xke6vwdadsml4vcv.jpg?v=1770011561"},{"product_id":"evo-manufacturing-front-vented-inner-fenders-coilover-suspensions-black","title":"EVO MANUFACTURING FRONT VENTED INNER FENDERS (COILOVER SUSPENSIONS) - BLACK","description":"\u003cp\u003eEVO MFG’s front vented inner fender liners for standard coil spring suspension lifts clean up the wheel wells while also protecting vital parts in the engine bay from foreign debris. Made in the USA from raw 16 gauge aluminum alloy offers strength, protection and a very low weight. The incorporation of vented backing plates allow heat to escape the engine bay for when you are pushing your Jeep to its limits while also allowing for custom painting options. Using brake formed, precision laser cut panels achieves a premium fitment and appearance for all JL\/JLU and JT Gladiator models. Engineered for quick and easy install and complete with all parts necessary for both driver and passenger inner fender liners, you will be back on the trails in no time!\u003c\/p\u003e\n\n\u003cp\u003eNote: For Coil Over Suspensions.\u003c\/p\u003e\n\n\u003cp\u003eNote: Due to the Diesel\/392 Washer fluid reservoir location and variables of tire size, axle width wheel backspacing etc. Tire size clearance may be limited with the install of these liners.  Vehicles with air\/hydraulic\/speed bumpstops may require trimming to liners  \u003c\/p\u003e\n\n\u003cp\u003eNote: Some reservoir shocks may require minor trimming to liners. \u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631395623089,"sku":"Part # 3098VDBWe price match! Call 866-601-5340!\n\n    We Price Match","price":430.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/bf7bkjm44izdj6svf07x.jpg?v=1770011563"},{"product_id":"bushwacker-hyperform-rear-fender-flares-2pc","title":"Bushwacker Hyperform Rear Fender Flares - 2pc","description":"\u003cp\u003eBushwacker drives you to push the boundaries with the forceful presence of HyperForm Fender Flares, a fearless new design conceived to blend the style of a flat fender with the intensity of a high clearance flare to take your Jeep’s off-road abilities to another level. \u003c\/p\u003e\n\n\u003cp\u003eHyperForm Fender Flares are constructed from a unique thermoplastic compound that offers  the same exceptional flexibility that’s made Bushwacker famous. And while durability is good, it’s even better when it accompanies capability. So, we made sure to mount the HyperForm flare high \u0026amp; tight to the body and out of harm’s way, with a refined contour to the flares back edge- no more trapped stones and debris grinding against your precious paint!  \u003c\/p\u003e\n\n\u003cp\u003eWhile the HyperForm was built to perform on the trail, it’s got the looks that make it at home on the streets just as well, with a sharp, dual-textured finish that combines well with the Wrangler’s OE trim and cutting-edge DRLs with dual-output LEDs that provide a cool, classy accent that adds visibility and enhances safety. And with a simple, no-drill installation and 5-year warranty, HyperForm Fender Flares are engineered to perform.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eHigh-Clearance Tire Coverage - High clearance flare to take your Jeep’s off-road abilities to another level.\u003cbr\u003e\n\tDurable Rugged Style - Built from durable, impact-resistant thermoplastic.\u003cbr\u003e\n\tUV Resistant Dual-Textured Finish - Resists chalking and designed to perfectly complement factory trim.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":46631395655857,"sku":"Part # 11051-07We price match! Call 866-601-5340!\n\n    We Price Match","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/yfbhbb1sbnsoplmt5kkm.jpg?v=1770011564"},{"product_id":"mopar-oem-passenger-side-rear-quarter-panel","title":"MOPAR OEM PASSENGER SIDE REAR QUARTER PANEL","description":"\u003cp\u003eAuthentic OEM passenger side rear quarter panel replacement for Wrangler two-door models.\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631395688625,"sku":"Part # 68302724AEWe price match! Call 866-601-5340!\n\n    We Price Match","price":226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mtctqei5yhx1rsvpzlny.jpg?v=1770011565"},{"product_id":"rugged-ridge-rear-aluminum-inner-fender-liners-black","title":"RUGGED RIDGE REAR ALUMINUM INNER FENDER LINERS - BLACK","description":"\u003cp\u003eRugged Ridge Aluminum Inner Fender Liners are a crucial element to building your off-road beast. Crafted from lightweight 14-gauge aluminum, CNC laser cut and bent for a perfect fit, these inner fenders protect your Jeep from mud and debris and look phenomenal doing it. Designed to work with trimmed OE flares and most aftermarket fenders, these inner fender liners offer maximum coverage while giving you that additional clearance you’re looking for when running bigger tires. Engineered to offer protection that far surpasses those flimsy factory liners with a durable satin black powder coated finish makes sure things remain stunning, even under layers of mud \u0026amp; muck. Rugged Ridge Aluminum Inner Fender Liners install easily using factory mounting locations with no drilling required. Stainless Steel mounting hardware is included.\u003c\/p\u003e\n\n\n\t\u003cp\u003eCNC laser cut \u0026amp; bent for perfect fit\u003cbr\u003e\n\tLightweight 1\/16-inch Aluminum\u003cbr\u003e\n\tDurable black powder coat finish\u003cbr\u003e\n\tCompatible with trimmed OE \u0026amp; most aftermarket fenders\u003cbr\u003e\n\tMounts to factory holes- No Drilling Required\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631395721393,"sku":"Part # 11615.62We price match! Call 866-601-5340!\n\n    We Price Match","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/zq77wa03auvafjbaup19.jpg?v=1770011566"},{"product_id":"mopar-oem-driver-side-rear-quarter-panel","title":"MOPAR OEM DRIVER SIDE REAR QUARTER PANEL","description":"\u003cp\u003eAuthentic OEM driver side rear quarter panel for two-door Wrangler JLs.\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631395754161,"sku":"Part # 68302725AEWe price match! Call 866-601-5340!\n\n    We Price Match","price":226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fvcycezbupdtndxyhnin.jpg?v=1770011568"},{"product_id":"mopar-oem-front-fender-u-bracket-passenger-side","title":"MOPAR OEM FRONT FENDER U-BRACKET - PASSENGER SIDE","description":"\u003cp\u003eAuthentic OEM replacement u-bracket for the front passenger fender on Wrangler JLs and Gladiator JTs.\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631395786929,"sku":"Part # 68302702AAWe price match! Call 866-601-5340!\n\n    We Price Match","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/er92dfdbt1mpinonhhny.jpg?v=1770011569"},{"product_id":"rough-country-rear-inner-fenders","title":"Rough Country Rear Inner Fenders","description":"\u003cp\u003eClean up the look of your inner fenders when using aftermarket flares with Rough Country’s Jeep Front and Rear Inner Fender Liners. These eye-catching inner fender upgrades help protect sensitive areas from dust, mud, and debris, and can be easily installed in no-time flat!\u003c\/p\u003e\n\n\u003cp\u003eAftermarket fenders are a huge improvement for most Jeeps wanting to get the best clearance and articulation possible, but when removing the stock fenders many people also remove the stock fender liners. Regain protection in this crucial area and protect your engine bay from the elements with Rough Country’s innovative Front and Rear Inner Fender Liners. With a unique 3-piece construction, these liners cover more areas than other liners on the market, giving more protection to your engine bay and body panels. Each Rough Country liner features a corrosion-resistant powder coat for long-lasting durability. Additionally, these liners mount firmly to the body for quiet operation, free of rattling or vibration noise.\u003c\/p\u003e\n\n\u003cp\u003eThe solid-steel, angular design with “RC” and “Rough Country” logo cutouts give an aggressive look to this now more visible area on your Jeep. An included, removable logo plate for the front liner can be custom painted to any color you wish for a pop of extra color, while the rear liner lines up perfectly to show the painted body color behind it. Rough Country Inner Fender Liners feature a bolt-on installation process with minor drilling for an easy upgrade you can do with common tools in a home garage. Includes Rough Country’s Lifetime Replacement Warranty.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003e3-piece construction for total protection\u003cbr\u003e\n\tKeeps mud and debris out of engine bay\u003cbr\u003e\n\tEasy installation\u003cbr\u003e\n\tIncludes optional configuration for reservoir shocks\u003cbr\u003e\n\tCorrosion-resistant black powder coat\u003cbr\u003e\n\tImproves the look of inner-fender area\u003c\/p\u003e\n\n\n\u003cp\u003eNotes - Important\u003c\/p\u003e\n\n\n\t\u003cp\u003eRequires minor drilling and grinding\u003cbr\u003e\n\tUses OE hole locations\u003cbr\u003e\n\tWorks with Rough Country Tube Fenders\u003cbr\u003e\n\tMay require modification to work with aftermarket \/ OE fenders\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":46631395819697,"sku":"Part # 10498AWe price match! Call 866-601-5340!\n\n    We Price Match","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/eqg46qebevhkwwecge5e.jpg?v=1770011570"},{"product_id":"mopar-front-sill-cover-passenger-side","title":"MOPAR FRONT SILL COVER - PASSENGER SIDE","description":"\u003cp\u003e**While Supplies Last**   **All Sales are Final, No Returns**\u003cbr\u003e\nAuthentic OEM passenger side sill cover for Jeep Wrangler JLs and Gladiator JTs\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631395852465,"sku":"Part # 68394596AAWe price match! Call 866-601-5340!\n\n    We Price Match","price":11.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dguc4km3rgaktvu1cwfe.jpg?v=1770011571"},{"product_id":"mopar-oem-driver-side-sill-cover","title":"MOPAR OEM DRIVER SIDE SILL COVER","description":"\u003cp\u003eAuthentic OEM door sill cover replacement for Wrangler JLs and Gladiator JTs.\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631395885233,"sku":"Part # 68394597AAWe price match! Call 866-601-5340!\n\n    We Price Match","price":11.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/jmo8msq1uawb5wkcizgx.jpg?v=1770011572"},{"product_id":"fabtech-rear-inner-fender-liners","title":"FABTECH REAR INNER FENDER LINERS","description":"\u003cp\u003eThese inner Jeep fenders have been designed to replace the factory plastic liners and mate to Fabtech Tube Fenders for a complete fender upgrade or can be used with stock fenders. The mill finish 6061 aluminum is formed to cover the entire inner wheel well opening of Wranglers, eliminating gaps where mud or debris can enter. They allow clearance for 37\" tires with a 3\" lift kit or 40\" tires with a 5\" lift.\u003c\/p\u003e\n\n\u003cp\u003eEach fender comes with removable plastic film to protect the striking mill finish during installation. The included nut tabs allow for an easy install with no rivenuts required.\u003c\/p\u003e\n\n\u003cp\u003eThe appearance of these inner fenders is just stunning and will complement your Jeep for a complete custom look that’s sure to get some attention.\u003c\/p\u003e\n\n\n\t\u003cp\u003eMill Finish 6061 Aluminum\u003cbr\u003e\n\tForm fitted\u003cbr\u003e\n\tAllows use of 37” tires with 3” kits and 40” tires with 5” kits\u003cbr\u003e\n\tFitted around fuel filler hose and EVAPE canister for maximum tire clearance\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":46631395983537,"sku":"Part # FTS24272We price match! Call 866-601-5340!\n\n    We Price Match","price":334.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ar86ot2w0epi8nzczi9s.jpg?v=1770011575"},{"product_id":"evo-manufacturing-front-vented-aluminum-inner-fenders-for-double-throwdown-suspensions","title":"EVO MANUFACTURING FRONT VENTED ALUMINUM INNER FENDERS FOR DOUBLE THROWDOWN SUSPENSIONS","description":"\u003cp\u003eEVO MFG Double Throwdown Suspension system vented front inner fender liners clean up the wheel wells while also protecting vital parts in the engine bay from foreign debris. Made in the USA from raw 16 gauge aluminum alloy offers strength, protection and a very low weight. The incorporation of vented backing plates allow heat to escape the engine bay for when you are pushing your Jeep to its limits while also allowing for custom painting options. Using brake formed, precision laser cut panels achieves a premium fitment and appearance for all JL\/JLU and JT Gladiator models. Engineered for quick and easy install and complete with all parts necessary for both driver and passenger inner fender liners, you will be back on the trails in no time!\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e*NOTE* Does not work with diesel models \u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631396049073,"sku":"Part # 3099VWe price match! Call 866-601-5340!\n\n    We Price Match","price":325.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/okxmowj5dmg0marsenc8.jpg?v=1770011577"},{"product_id":"mopar-forward-fender-bracket-driver-side","title":"MOPAR FORWARD FENDER BRACKET - DRIVER SIDE","description":"","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631396081841,"sku":"Part # 68308923AAWe price match! Call 866-601-5340!\n\n    We Price Match","price":4.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/gsnriefbe28ko6qcbnzj.jpg?v=1770011578"},{"product_id":"rugged-ridge-metal-max-front-fender-flares","title":"RUGGED RIDGE METAL MAX FRONT FENDER FLARES","description":"\u003cp\u003eThe Metal Max Fender Flares from Rugged Ridge combines classic flat fender styling, forged in steel, with a touch of modern lighting technology to catch the eye. Together they form a ground-pounding flare design guaranteed to make a scene, on-road and off.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eTubular steel frame with welded steel exterior skin\u003cbr\u003e\n\tGreater clearance for larger tires and optimized approach angles\u003cbr\u003e\n\tWrap around dual-color DRL lights\u003cbr\u003e\n\tCompatible with OE wheel liners (Requires minor trimming).\u003c\/p\u003e\n\n\n\u003cp\u003eNotes\u003c\/p\u003e\n\n\n\t\u003cp\u003eRear Steel Tube Fender Flares sold separately.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631396114609,"sku":"Part # 11641.13We price match! Call 866-601-5340!\n\n    We Price Match","price":959.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/aj6pgoiyjetomw8nlna7.jpg?v=1770011579"},{"product_id":"body-armor-front-fender-flares","title":"BODY ARMOR FRONT FENDER FLARES","description":"\u003cp\u003e3\/16″ steel plate\u003cbr\u003e\n\tFront flare set\u003cbr\u003e\n\tHigh clearance flat design\u003cbr\u003e\n\tProvides 7″ of coverage\u003cbr\u003e\n\tIncludes dot approved switch back driving light\u003cbr\u003e\n\tTwo-stage powder coat light texture finish in black\u003c\/p\u003e","brand":"Body Armor","offers":[{"title":"Default Title","offer_id":46631396147377,"sku":"Part # JL-6102We price match! Call 866-601-5340!\n\n    We Price Match","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/oul1aawjr3mw5pqhcwpx.jpg?v=1770011580"},{"product_id":"nemesis-industries-notorious-dovetail-rear-flares-textured-black","title":"NEMESIS INDUSTRIES NOTORIOUS DOVETAIL REAR FLARES - TEXTURED BLACK","description":"\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eNemesis's superior construction\u003cbr\u003e\n\tBuilt from high strength 3\/16\" aluminum\u003cbr\u003e\n\tSeamless finish  - textured black powder coat\u003cbr\u003e\n\tIncreases clearance for larger tires\u003cbr\u003e\n\tInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003cbr\u003e\n\tSold as a pair\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eHeavy-Duty Trail Ready Flares\u003c\/p\u003e\n\n\u003cp\u003eReplace your flimsy plastic flares with the Nemesis Industries Notorious Dovetail Rear Flares. Built from robust 3\/16\" aluminum, these flares are designed to fend off trail impacts while safeguarding your Jeep's body panels. Their high-clearance design makes it easier to accommodate larger tires, giving your Jeep enhanced off-road capability. Finished with a textured black powder coat, these flares deliver rugged style and long-lasting protection against the elements.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNotes\u003c\/p\u003e\n\n\n\t\u003cp\u003eImage shown may not be an exact representation of the product.\u003cbr\u003e\n\tCheck local lift laws for rules on tire coverage\u003c\/p\u003e","brand":"Nemesis Industries","offers":[{"title":"Default Title","offer_id":46631396180145,"sku":"Part # 146502We price match! Call 866-601-5340!\n\n    We Price Match","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/sbqllhchbgf1ahsodq8v.jpg?v=1770011581"},{"product_id":"evo-manufacturing-front-vented-inner-fenders-coil-spring-suspensions-black","title":"EVO MANUFACTURING FRONT VENTED INNER FENDERS (COIL SPRING SUSPENSIONS) - BLACK","description":"\u003cp\u003eEVO MFG’s front vented inner fender liners for standard coil spring suspension lifts clean up the wheel wells while also protecting vital parts in the engine bay from foreign debris. Made in the USA from raw 16 gauge aluminum alloy offers strength, protection and a very low weight. The incorporation of vented backing plates allow heat to escape the engine bay for when you are pushing your Jeep to its limits while also allowing for custom painting options. Using brake formed, precision laser cut panels achieves a premium fitment and appearance for all JL\/JLU and JT Gladiator models. Engineered for quick and easy install and complete with all parts necessary for both driver and passenger inner fender liners, you will be back on the trails in no time!\u003c\/p\u003e\n\n\u003cp\u003eNote: For Coil Spring Suspensions.\u003c\/p\u003e\n\n\u003cp\u003eNote: Due to the Diesel\/392 Washer fluid reservoir location and variables of tire size, axle width wheel backspacing etc. Tire size clearance may be limited with the install of these liners.  Vehicles with air\/hydraulic\/speed bumpstops may require trimming to liners  \u003c\/p\u003e\n\n\u003cp\u003eSome reservoir shocks may require minor trimming to liners. \u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631396212913,"sku":"Part # 3097VDBWe price match! Call 866-601-5340!\n\n    We Price Match","price":430.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/kl7ooi48f8wy9ce2qas1.jpg?v=1770011582"},{"product_id":"rugged-ridge-hd-front-steel-tube-fenders-pair-black","title":"Rugged Ridge HD Front Steel Tube Fenders, Pair - Black","description":"\u003cp\u003eLeave the pavement far behind, along with your sense of refinement, with a full set of Rugged Ridge Steel Tube Fenders. We engineered these fenders to really shine when there are rocks to climb, so we started with a burly 1.25-inch mandrel-bent steel tube frame. The fenders top skin was die-stamped and laser-cut from 12-gauge steel plate, rugged enough to survive a real-world bashing that would send a plastic fender to the trash pile. Stylized front plates contoured base plates, as well as marker light brackets, are all CNC bent from 3mm thick steel, carrying out the tradition of being tougher than they need to be; while integrated amber LED corner lights keep things highway friendly.\u003c\/p\u003e\n\n\u003cp\u003eSince the elements off-road can be as harsh as the terrain, we finished our JL Steel Tube Fenders with a durable satin black powder coat finish that resists rust and corrosion and looks civilized doing it. Add in Teflon-coated button head hardware with Nylock retainers and it’s hard to find a more potent off-road combination. Plus, you can shake off another load of factory plastic when you add a set of Aluminum Front Inner Fenders (11615.61) to complete the look of your new fenders.\u003c\/p\u003e\n\n\u003cp\u003eNote: Some JL models equipped with LED Lighting package may require Tazer programming to remove a “bulb-out” dash warning.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631396245681,"sku":"Part # 11615.71We price match! Call 866-601-5340!\n\n    We Price Match","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mhcl0p84nmbcijdxkitj.jpg?v=1770011583"},{"product_id":"rugged-ridge-hd-rear-steel-tube-fenders-pair-black","title":"Rugged Ridge HD Rear Steel Tube Fenders, Pair - Black","description":"\u003cp\u003eLeave the pavement far behind, along with your sense of refinement, with a full set of Rugged Ridge Steel Tube Fenders. We engineered these fenders to really shine when there are rocks to climb, so we started with a burly 1.25-inch mandrel-bent steel tube frame. The fenders top skin was die-stamped and laser-cut from 12-gauge steel plate, rugged enough to survive a real-world bashing that would send a plastic fender to the trash pile. Stylized front plates contoured base plates, as well as marker light brackets, are all CNC bent from 3mm thick steel, carrying out the tradition of being tougher than they need to be; while integrated amber LED corner lights keep things highway friendly.\u003c\/p\u003e\n\n\u003cp\u003eSince the elements off-road can be as harsh as the terrain, we finished our JL Steel Tube Fenders with a durable satin black powder coat finish that resists rust and corrosion and looks civilized doing it. Add in Teflon-coated button head hardware with Nylock retainers and it’s hard to find a more potent off-road combination. Plus, you can shake off another load of factory plastic when you add a set of Aluminum Front Inner Fenders (11615.61) to complete the look of your new fenders.\u003c\/p\u003e\n\n\u003cp\u003eNote: Some JL models equipped with LED Lighting package may require Tazer programming to remove a “bulb-out” dash warning.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631396278449,"sku":"Part # 11615.72We price match! Call 866-601-5340!\n\n    We Price Match","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/bpzbylpyykjnrj1lxp1l.jpg?v=1770011584"},{"product_id":"rugged-ridge-front-fender-chop-brackets","title":"Rugged Ridge Front Fender Chop Brackets","description":"\u003cp\u003eModifying JL flares for off-road is easy and the look is nothing short of heroic with the Rugged Ridge Fender Chop Bracket Kit. By removing the bulky factory fender light assembly, you’ll have greater clearance for oversized tires with nothing to get between you and that next obstacle. Sturdy steel chop brackets install easily and lend support for the front of the factory fender flare, adding a fearless, aggressive new look. And since Jeeps don’t live solely off-road, we’ve built-in bullet-style side marker and turn signal lights to ensure safe on-road operation too. Brackets come in pairs and feature a matte black powder coat finish that blends seamlessly with the factory flare finish. All installation hardware and instructions are included for a hassle-free install in record time.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631396311217,"sku":"Part # 11640.92We price match! Call 866-601-5340!\n\n    We Price Match","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fvogr3eswefyidv8djca.jpg?v=1770011585"},{"product_id":"evo-manufacturing-front-vented-aluminum-inner-fenders-coil-spring-suspensions-black","title":"EVO MANUFACTURING FRONT VENTED ALUMINUM INNER FENDERS (COIL SPRING SUSPENSIONS) - BLACK","description":"\u003cp\u003eEVO MFG’s front vented inner fender liners for standard coil spring suspension lifts clean up the wheel wells while also protecting vital parts in the engine bay from foreign debris. Made in the USA from raw 16 gauge aluminum alloy offers strength, protection and are very low weight. The incorporation of vented backing plates allow heat to escape the engine bay for when you are pushing your Jeep to its limits while also allowing for custom painting options. Using brake formed, precision laser cut panels achieves a premium fitment and appearance for all JL\/JLU and JT Gladiator models. Engineered for quick and easy install and complete with all parts necessary for both driver and passenger inner fender liners, you will be back on the trails in no time!  Vehicles with air\/hydraulic\/speed bump stops may require trimming to liners.\u003c\/p\u003e\n\n\u003cp\u003e*Note: For Coil Spring Suspensions.\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":46631396343985,"sku":"Part # 3097VBWe price match! Call 866-601-5340!\n\n    We Price Match","price":430.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/lkct4zczk6izhf2zbzzc.jpg?v=1770011586"},{"product_id":"fishbone-offroad-legacy-series-rear-inner-fenders-aluminum-raw","title":"Fishbone Offroad Legacy Series Rear Inner Fenders - Aluminum Raw","description":"\u003cp\u003eIf you have Tube Fenders, you need a set of Aluminum Inner Fenders to finish the look. Once installed these offer protection from rocks and debris entering the engine compartment. These are stamped from Aluminum with the Fishbone Offroad Logo.\u003c\/p\u003e\n\n\n\t\u003cp\u003eMade from Raw Aluminum\u003cbr\u003e\n\tFishbone logo laser cut on all 4 inners\u003cbr\u003e\n\tREAR SET ONLY\u003cbr\u003e\n\tThese are only the inner panels\u003cbr\u003e\n\tRemovable Cooling Vents \u0026amp; Accent Plates for Custom Paint\u003c\/p\u003e","brand":"Fishbone Offroad","offers":[{"title":"Default Title","offer_id":46631396376753,"sku":"Part # FB33108RWe price match! Call 866-601-5340!\n\n    We Price Match","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/kmleiu6keb3k4vf2mp6f.jpg?v=1770011587"},{"product_id":"rough-counrty-front-inner-fenders","title":"Rough Counrty Front Inner Fenders","description":"\u003cp\u003eClean up the look of your inner fenders when using aftermarket flares with Rough Country’s Jeep Front and Rear Inner Fender Liners. These eye-catching inner fender upgrades help protect sensitive areas from dust, mud, and debris, and can be easily installed in no-time flat!\u003c\/p\u003e\n\n\u003cp\u003eAftermarket fenders are a huge improvement for most Jeeps wanting to get the best clearance and articulation possible, but when removing the stock fenders many people also remove the stock fender liners. Regain protection in this crucial area and protect your engine bay from the elements with Rough Country’s innovative Front and Rear Inner Fender Liners. With a unique 3-piece construction, these liners cover more areas than other liners on the market, giving more protection to your engine bay and body panels. Each Rough Country liner features a corrosion-resistant powder coat for long-lasting durability. Additionally, these liners mount firmly to the body for quiet operation, free of rattling or vibration noise.\u003c\/p\u003e\n\n\u003cp\u003eThe solid-steel, angular design with “RC” and “Rough Country” logo cutouts give an aggressive look to this now more visible area on your Jeep. An included, removable logo plate for the front liner can be custom painted to any color you wish for a pop of extra color, while the rear liner lines up perfectly to show the painted body color behind it. Rough Country Inner Fender Liners feature a bolt-on installation process with minor drilling for an easy upgrade you can do with common tools in a home garage. Includes Rough Country’s Lifetime Replacement Warranty.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003e3-piece construction for total protection\u003cbr\u003e\n\tKeeps mud and debris out of engine bay\u003cbr\u003e\n\tEasy installation\u003cbr\u003e\n\tIncludes optional configuration for reservoir shocks\u003cbr\u003e\n\tFront Inner Fenders feature a paintable logo plate\u003cbr\u003e\n\tCorrosion-resistant black powder coat\u003cbr\u003e\n\tImproves the look of inner-fender area\u003c\/p\u003e\n\n\n\u003cp\u003eNotes - Important\u003c\/p\u003e\n\n\n\t\u003cp\u003eRequires minor drilling and grinding\u003cbr\u003e\n\tUses OE hole locations\u003cbr\u003e\n\tWorks with Rough Country Tube Fenders\u003cbr\u003e\n\tMay require modification to work with aftermarket \/ OE fenders\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":46631396409521,"sku":"Part # 10497AWe price match! Call 866-601-5340!\n\n    We Price Match","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/vfhfcfldtlfm7smdrarn.jpg?v=1770011588"},{"product_id":"mopar-fender-support-beam-rear-bracket","title":"MOPAR FENDER SUPPORT BEAM REAR BRACKET","description":"\u003cp\u003e***Note: Part can be found as reference #9 in image.***\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631396442289,"sku":"Part # 68341332ABWe price match! Call 866-601-5340!\n\n    We Price Match","price":5.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/nh7mvnkz2gtizyzvgasv.jpg?v=1770011589"},{"product_id":"artec-industries-front-fender-chop-kit-brackets","title":"ARTEC INDUSTRIES FRONT FENDER CHOP KIT BRACKETS","description":"\u003cp\u003eArtec Industries is excited to announce our new JL Front Fender Chop Kit Brackets which not only reinforce your factory upper half Rubicon fenders after you've removed the lower half, they also give you mounting locations for new turn signal and marker lights. Our brackets are constructed from rigid 1\/8\" thick steel and designed using State-of-the-Art 3D modeling with files directly from the manufacturer for a precise fit. These brackets are hard powdercoated black for direct bolt-on installation and a long life. All this at a PHENOMENAL PRICE and manufactured in-house which means its MADE IN THE USA!  \u003c\/p\u003e\n\n\u003cp\u003eFeatures:       \u003c\/p\u003e\n\n\n\t\u003cp\u003eDesigned for OEM Rubicon fender flares with the lower half of the flare removed (other models to follow)\u003cbr\u003e\n\t1\/8\" steel brackets add rigidity back to upper flare half\u003cbr\u003e\n\tHoles included for mounting Marker\/Turn lights (optional...not included)\u003cbr\u003e\n\tDesigned using original OEM files and CNC laser cut and CNC bent in-house for precise fit\u003cbr\u003e\n\tIncludes new hardware for mounting the brackets\u003cbr\u003e\n\tFully Welded and powdercoated for direct bolt-in installation...5 minute install\u003cbr\u003e\n\tMADE IN USA IN HOUSE FROM USA MATERIALS\u003cbr\u003e\n\tPowdercoat color is black\u003cbr\u003e\n\tAVAILABLE ADD-ON BOLT STYLE LED MARKER AND TURN SIGNAL LIGHTS\u003cbr\u003e\n\tAVAILABLE ADD-ON OEM HARDWARE REPLACEMENT KIT. Replaces all the factory clip style hardware with more rugged bolts, nut and rivnuts.\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNOTE: LED LIGHTS NOT INCLUDED BUT AVAILABLE AS AN ADD-ON (OZ1601 - will need 4), BRACKETS ONLY   -   SOLD IN PAIRS\u003c\/p\u003e\n\n\u003cp\u003eNOTE: While all precautions are made to ensure the powdercoated surface is protected, small scratches from the shipping process may be present upon arrival.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46631396475057,"sku":"Part # JL2112We price match! Call 866-601-5340!\n\n    We Price Match","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/opclt2olwokukuppte9u.jpg?v=1770011590"},{"product_id":"mopar-fender-support-beam-forward-bracket","title":"MOPAR FENDER SUPPORT BEAM FORWARD BRACKET","description":"","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631396507825,"sku":"Part # 68302704ABWe price match! Call 866-601-5340!\n\n    We Price Match","price":5.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/tey0onv01abigu0vndrx.jpg?v=1770011591"},{"product_id":"mopar-inner-quarter-panel-passenger-side","title":"MOPAR INNER QUARTER PANEL - PASSENGER SIDE","description":"\u003cp\u003e***Note: Part can be found as reference #5 in image.***\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":46631396540593,"sku":"Part # 68302794AGWe price match! Call 866-601-5340!\n\n    We Price Match","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/usjzy5ctzbitxbk1p8vb.jpg?v=1770011592"},{"product_id":"rugged-ridge-fender-liner-push-pin","title":"RUGGED RIDGE FENDER LINER PUSH-PIN","description":"\u003cp\u003eRugged Ridge proudly offers high-quality replacement parts so that you can keep your part of the Jeep heritage on the road- parts that always meet or exceed manufacturer's specs for quality you can trust. \u003cbr\u003e\nProduct Details:\u003c\/p\u003e\n\n\u003cp\u003eOE Style\u003cbr\u003e\nDirect Fit\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":46631396573361,"sku":"Part # 11811.36We price match! Call 866-601-5340!\n\n    We Price Match","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dm5irxbpoej8j7wftwds.jpg?v=1770011593"}],"url":"https:\/\/wp4x4.com\/collections\/fenders.oembed?page=6","provider":"WP4x4","version":"1.0","type":"link"}