{"title":"Jeep Death Wobble Fix Parts for JL, JK \u0026 JT","description":"\u003cp\u003eDeath wobble is the violent front-end shake some solid-axle Jeeps get after hitting a bump at speed. It almost always traces back to looseness somewhere in the front end, not to a single bad part. This collection groups the parts that usually get replaced when chasing it down on a Jeep Wrangler JL, Wrangler JK or Gladiator JT: front track bars, tie rods, drag links, ball joints, pitman arms and steering stabilizers, from brands like Steer Smarts, RockJock, Teraflex and Synergy.\u003c\/p\u003e\u003cp\u003eInspect before you buy. Check the track bar ends and mounts first, then ball joints, tie rod and drag link ends, and wheel bearings. Synergy Manufacturing's own \u003ca href=\"https:\/\/www.synergymfg.com\/jeep-jk-jku-death-wobble-checklist.html\" rel=\"nofollow\"\u003edeath wobble checklist\u003c\/a\u003e is built around the same parts: ball joints, track bars and their hardware, tie rods, drag links and stabilizers. On lifted Jeeps, Teraflex notes in its \u003ca href=\"https:\/\/teraflex.com\/blog\/faq\/\" rel=\"nofollow\"\u003eFAQ\u003c\/a\u003e that taller lifts need control arms to correct caster, and that an adjustable track bar lets you re-center the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Jeep Wrangler JL (2018+), Wrangler JK (2007-2018) and Gladiator JT (2020+). Many parts are specific to Rubicon or non-Rubicon axles, so check each product page.\u003c\/p\u003e\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eWill a new steering stabilizer cure death wobble?\u003c\/h3\u003e\u003cp\u003eUsually not. A stabilizer only damps the shake. If a track bar, ball joint or tie rod end is worn, the wobble comes back, so fix the loose part first.\u003c\/p\u003e\u003ch3\u003eWhich part should I check first?\u003c\/h3\u003e\u003cp\u003eThe front track bar. Have a helper rock the steering wheel with the engine running while you watch both ends and mounts for movement.\u003c\/p\u003e\u003ch3\u003eDo I need an alignment after replacing these parts?\u003c\/h3\u003e\u003cp\u003eYes. New steering links and track bars change toe and axle centering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWant it installed?\u003c\/strong\u003e \u003ca href=\"https:\/\/www.wreckless4x4.com\/services\"\u003eBook an install at Wreckless 4x4\u003c\/a\u003e, WP4x4's sister shop serving Nashville and Middle Tennessee.\u003c\/p\u003e","products":[{"product_id":"steer-smarts-yeti-xd-pro-series-adjustable-front-track-bar","title":"Steer Smarts YETI XD™ JK FRONT ADJUSTABLE TRACK BAR (RED) (PART# 75033001)","description":"\u003ctable height=\"9\" width=\"575\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYETI XD™ JK ADJUSTABLE TRACK BAR\u003c\/strong\u003e\u003c\/h2\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e by Steer Smarts\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePart number:\u003cb data-mce-fragment=\"1\"\u003e 75033001\u003c\/b\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e \u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe YETI XD™ Adjustable Track Bar is fully adjustable on the vehicle and is designed to be the strongest track bar available for the Jeep Wrangler JK.\u003c\/strong\u003e\u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003e \u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFEATURES\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eADJUSTABLE TRACK BAR:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy bolt-on installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWorks on stock height (no lift) up to a 6.5\" lift\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eE-coated and powder coated for a long lasting appearance under harsh conditions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eForged from 2\" Steel for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned to correct Track Bar geometry on the Jeep Wrangler JK\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes all necessary installation hardware.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMADE IN THE USA\u003c\/span\u003e\u003c\/strong\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe YETI XD Track Bar fits left-hand drive 2007 to 2018 JK\/JKU Wranglers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e***Track Bar cannot be guaranteed to fit with all aftermarket diff covers***\u003c\/strong\u003e\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":43079988609201,"sku":"75048001","price":285.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/TrackBar_Complete_1024x1024_547a80a3-9b74-45b0-bf80-75cb3acd8121.jpg?v=1700069562"},{"product_id":"steer-smarts-yeti-xd-draglink-and-tie-rod-cap-caps","title":"Steer Smarts YETI XD Draglink and Tie Rod Cap-Caps","description":"\u003cp\u003eThe YETI XD™ Draglink and Tie Rod Cap-Cap covers the spun cap of the draglink or tie rod end.\u003c\/p\u003e\n\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\n\n\t\u003cp\u003eIncludes 2x cap caps\u003cbr\u003e\n\tIncludes 2x gaskets\u003cbr\u003e\n\tMADE IN THE USA\u003c\/p\u003e\n\n\n\u003cp\u003eEasy Install: \u003c\/p\u003e\n\n\u003cp\u003eStep 1: Remove zerk fittings from ends.\u003c\/p\u003e\n\n\u003cp\u003eStep 2: Put gaskets on the forged ends (Thicker gasket goes on the passenger side for tie rod and draglink)\u003c\/p\u003e\n\n\u003cp\u003eStep 3: Place cap cap on rod end tighten zerks back down. \u003c\/p\u003e\n\n\u003cp\u003eRepeat steps for all ends.\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":43079990018225,"sku":"52036002","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/maw1xvz9pvs1kjvuxtmb.jpg?v=1767932106"},{"product_id":"steer-smarts-yeti-xd-ud60-no-mod-bolt-in-steering-kit","title":"Steer Smarts Yeti XD JL\/JT UD60 No Mod Bolt-In Steering Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"https:\/\/steersmarts.com\/cdn\/shop\/files\/SS_Header_350x.png?v=1613505511\" alt=\"Steer Smarts\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/steersmarts.com\/cdn\/shop\/files\/SS_Header_350x.png?v=1613505511\"\u003e\n\u003ctable height=\"9\" width=\"575\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYETI XD™ JL \/ JT DANA UD60 \"NO MOD\" BOLT-IN STEERING KIT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e by Steer Smarts\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePart number:\u003cb data-mce-fragment=\"1\"\u003e DANA-KIT-02-AA\u003c\/b\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan color=\"#444444\" data-mce-fragment=\"1\"\u003eFor those who want a bolt-in, no modification required, heavy-duty steering system for the Jeep Wrangler JL \/ JT, we have the solution for you. This one-click kit includes our YETI XD™ Tie rod, Bottom Mount Drag Link, and 1-5\/8\" Aluminum Damper bracket. You can round out the front end trifecta by adding our YETI XD™ Front Adjustable track bar for the ultimate front end setup. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFEATURES\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eYETI XD TIE ROD + DRAG LINK ASSEMBLIES:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy bolt-on installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMANUFACTURED IN THE USA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eBALL JOINTS:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e30mm 1-1\/2 Ton ball joints are designed specifically for the JL \/ JT with a UD60 (68.5\" wide).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInduction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh-quality seals ensure ball joints' life is long-lived. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFully greaseable.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eTIE ROD + DRAG LINK ENDS:\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePowder coat over E-coat for a long lasting appearance under harsh conditions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eExternal threads are e-coated for durability and long-term serviceability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eForged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLarge 1 ¼ inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUnique “Reverse Pin” technology on the passenger-side ends prevents our linkage from unwanted flopping\/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eADJUSTER TUBES: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTie rod and drag link adjusters are manufactured from large diameter ¼ inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInternal threads and tube are also e-coated for long term serviceability.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eYETI XD™ tie rod and drag link fit all left-hand drive JL Wrangler models 2018+ and JT Gladiator models 2018+ equipped with a UD60 (68.5\" wide).\u003c\/span\u003e\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":43079992213681,"sku":"DANA-KIT-02-AA","price":1075.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dana_no_mod_kit_JK_JL_JT_1024x1024_0931c4f2-5080-45e8-a2e5-e8a70cdf211f.jpg?v=1699858176"},{"product_id":"steer-smarts-jeep-wrangler-jk-yeti-26-hd-no-drill-top-mount-draglink-outer-end","title":"Steer Smarts Jeep Wrangler JK YETI 26 HD ''No Drill'' Top Mount Draglink Outer End","description":"The YETI HD 26 Series linkage was engineered from the ground up with extreme detail to every component. This HD top mounted Draglink end is a direct bolt on for high steer applications. The YETI HD 26 features our patent pending \"No Drill\" REVERSE TAPER MOUNT, making it the easiest way to top mount your draglink. No modifications of the knuckle is required and bolts directly to the factory tapered knuckle and factory draglink adjuster sleeve. Forged from 15v41 medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength. External threads are e-coated for durability and long term serviceability. Cold headed 26mm medium carbon alloy steel ball studs provide incredible impact toughness. Ball studs are also induction heat treated greatly improving their ultimate and fatigue strength, as well as wear resistance for superior off road durability. Steel bearings are also used for exceptional ball joint wear resistance and robustness. Made in the USA.\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003eAttributes\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eGTIN: \u003c\/b\u003e00887753497154\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eBrand Name: \u003c\/b\u003eSteer Smarts\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003eExtended Information\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eCountry of Origin: \u003c\/b\u003eUS\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eEmissions : \u003c\/b\u003eCARB Eligible\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eLife Cycle Status: \u003c\/b\u003eAvailable To Order\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003ePacking Information\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eQuantity of Each: \u003c\/b\u003e1\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003ePackage UOM: \u003c\/b\u003eEA\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eDimension: \u003c\/b\u003e36 x 7 x 6 inches\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eWeight: \u003c\/b\u003e11 lb\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003eVideos\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Yet_Linkage.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Draglink_Fatigue_Testing.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Jeep_JK.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Products.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\r\n\u003cdiv id=\"sema-product-fitment\" class=\"product__accordion accordion fitment\"\u003e\u003c\/div\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":43100287664305,"sku":"77058001","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/products\/77058001_20YETI_2026_20Top_20Mount_20No_20Drill_20Outer_20Draglink.jpg?v=1700354339"},{"product_id":"steer-smarts-jeep-wrangler-jk-yeti-xd-drilled-top-mount-draglink-and-tie-rod-assembly-steering-kit","title":"Steer Smarts Jeep Wrangler JK YETI XD ''Drilled'' Top Mount Draglink And Tie Rod Assembly Steering Kit","description":"The YETI XD Top Mount Draglink and Tie Rod Kit for drilled knuckles is a complete bolt-on for high steer applications and features our anti-flop linkage design. The YETI XD Top Mount is the quickest and easiest draglink flip on the market for drilled knuckles that have the drill knuckle bushing installed. Installation takes just minutes. Ball joint features, 30mm 1 1\/2 Ton ball joints designed specifically for the JK, cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage, induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability, steel on steel bearings provide exceptional ball joint wear resistance and robustness, high quality seals ensure long ball joint life, superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition, fully greaseable joints. Draglink end features; powder coat over E-coat for a long lasting appearance under harsh conditions, forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength, large 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads. Adjuster tube features; Draglink adjuster is manufactured from large diameter 1\/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength, adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts, designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle, Internal threads and tube are also e-coated for long term serviceability. This product is made in the USA.  NOTE:  KIT SHIPS IN 2 BOXES.\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003eAttributes\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eGTIN: \u003c\/b\u003e00887753497062\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eBrand Name: \u003c\/b\u003eSteer Smarts\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003eExtended Information\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eCountry of Origin: \u003c\/b\u003eUS\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eEmissions : \u003c\/b\u003eCARB Eligible\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eLife Cycle Status: \u003c\/b\u003eAvailable To Order\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003ePacking Information\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eQuantity of Each: \u003c\/b\u003e1\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003ePackage UOM: \u003c\/b\u003eEA\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eDimension: \u003c\/b\u003e67 x 9 x 9 inches\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eWeight: \u003c\/b\u003e1 lb\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\t\t\t\t\u003cdiv class=\"product__accordion accordion\"\u003e\n\t\t\t\t\u003cdetails\u003e\n\t\t\t\t  \u003csummary aria-expanded=\"false\"\u003e\n\t\t\t\t\t\u003cdiv class=\"summary__title\"\u003e\u003ch2 class=\"h4 accordion__title\"\u003eVideos\u003c\/h2\u003e\u003c\/div\u003e\n\t\t\t\t\t\u003csvg aria-hidden=\"true\" focusable=\"false\" role=\"presentation\" class=\"icon icon-caret\" viewbox=\"0 0 10 6\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M9.354.646a.5.5 0 00-.708 0L5 4.293 1.354.646a.5.5 0 00-.708.708l4 4a.5.5 0 00.708 0l4-4a.5.5 0 000-.708z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\t\t\t\t  \u003c\/summary\u003e\n\t\t\t\t  \u003cdiv class=\"accordion__content\"\u003e\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Yet_Linkage.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Draglink_Fatigue_Testing.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Jeep_JK.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003cvideo width=\"100%\" controls\u003e\r\n\u003csource src=\"https:\/\/1ddf4b1b856a39e33863-d785dc0e3b62b5e0ef07f55db00b0659.ssl.cf2.rackcdn.com\/Steer%20Smarts\/Steer_Smarts_Products.mp4\" type=\"video\/mp4\"\u003e\u003c\/video\u003e\r\n\u003c\/div\u003e\n\t\t\t\t\u003c\/details\u003e\n\t\t\t\t\u003c\/div\u003e\r\n\r\n\u003cdiv id=\"sema-product-fitment\" class=\"product__accordion accordion fitment\"\u003e\u003c\/div\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":43100288614577,"sku":"78069001","price":769.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/products\/78069001_20Top_20Mount_20Drilled_20Tie_20Rod_20Kit.jpg?v=1700354374"},{"product_id":"rpm-steering-2-5-ton-jl-jt-hd-2-aluminum-steering-kit-rubicon-mojave-max-tow","title":"RPM Steering 2.5 Ton JL\/JT HD 2'' Aluminum Steering Kit (Rubicon\/Mojave\/ Max Tow)","description":"\u003cdiv\u003e\u003cspan\u003e2.5 Ton JL\/JT HD 2\" Aluminum Steering Kit\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e(Rubicon\/Mojave\/JT Max Tow)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMassive 2\" solid USA made 7075 T6 cold finish aluminum link with hexed ends for easy adjustments\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1.25\" forged TREs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnti-flop ends built-in (excludes pitman arm joint)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSerrated Belleville washers (included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTie rod and drag link included in the kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo drilling required for stock location\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrag link flip option\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cspan\u003ePLEASE NOTE:\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTie rod is a direct bolt-on for stock JL\/JT axles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e17\" wheel or 4.75\" backspacing or less required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEV or stock wheels will require a 0.75\" wheel spacer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSelect stock location for up to 4\" lift.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor lifts higher than 4.5\", you may need a flip kit. Please call to confirm prior to ordering.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RPM Steering","offers":[{"title":"Flip Kit \/ No Clamp","offer_id":43114181427377,"sku":"RPM-2001","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Standard Stabilizer Clamp (+79.99)","offer_id":43114181492913,"sku":"RPM-2001SC","price":1079.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Standard Stabilizer Clamp for FOX ATS (+89.99)","offer_id":43114181525681,"sku":"RPM-2001FOX","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Standard Stabilizer Clamp for Falcon (+89.99)","offer_id":43114181558449,"sku":"RPM-2001FAL","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Double Shear Hydro Assist Clamp (+109.99)","offer_id":43114181591217,"sku":"RPM-2001DS","price":1109.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Factory Location Stabilizer Clamp (+99.99)","offer_id":43114181623985,"sku":"RPM-2001FL","price":1099.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location - No Taper Sleeve \/ No Clamp","offer_id":43114181656753,"sku":"RPM-2001","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Stock Location - No Taper Sleeve \/ Standard Stabilizer Clamp (+79.99)","offer_id":43114181689521,"sku":"RPM-2001SC","price":1079.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location - No Taper Sleeve \/ Standard Stabilizer Clamp for FOX ATS (+89.99)","offer_id":43114181722289,"sku":"RPM-2001FOX","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location - No Taper Sleeve \/ Standard Stabilizer Clamp for Falcon (+89.99)","offer_id":43114181755057,"sku":"RPM-2001FAL","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location - No Taper Sleeve \/ Double Shear Hydro Assist Clamp (+109.99)","offer_id":43114181787825,"sku":"","price":1109.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location - No Taper Sleeve \/ Factory Location Stabilizer Clamp (+99.99)","offer_id":43114181820593,"sku":"","price":1099.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ No Clamp","offer_id":43114181853361,"sku":"RPM-2001FNT","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Standard Stabilizer Clamp (+79.99)","offer_id":43114181886129,"sku":"RPM-2001FNTSC","price":1079.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Standard Stabilizer Clamp for FOX ATS (+89.99)","offer_id":43114181918897,"sku":"RPM-2001FNTFOX","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Standard Stabilizer Clamp for Falcon (+89.99)","offer_id":43114181951665,"sku":"RPM-2001FNTFAL","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Double Shear Hydro Assist Clamp (+109.99)","offer_id":43114181984433,"sku":"RPM-2001FNTDS","price":1109.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Factory Location Stabilizer Clamp (+99.99)","offer_id":43114182017201,"sku":"RPM-2001FNTFL","price":1099.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - Add Draper Sleeve (+19.99) \/ No Clamp","offer_id":43114182049969,"sku":"RPM-2001F","price":1019.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - Add Draper Sleeve (+19.99) \/ Standard Stabilizer Clamp (+79.99)","offer_id":43114182082737,"sku":"RPM-2001FSC","price":1099.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - Add Draper Sleeve (+19.99) \/ Standard Stabilizer Clamp for FOX ATS (+89.99)","offer_id":43114182115505,"sku":"RPM-2001FFOX","price":1109.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - Add Draper Sleeve (+19.99) \/ Standard Stabilizer Clamp for Falcon (+89.99)","offer_id":43114182148273,"sku":"RPM-2001FFAL","price":1109.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - Add Draper Sleeve (+19.99) \/ Double Shear Hydro Assist Clamp (+109.99)","offer_id":43114182181041,"sku":"RPM-2001FDS","price":1129.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - Add Draper Sleeve (+19.99) \/ Factory Location Stabilizer Clamp (+99.99)","offer_id":43114182213809,"sku":"RPM-2001FFL","price":1119.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/25tonrpmsteeringfullkit.jpg?v=1700848377"},{"product_id":"rpm-steering-2-5-ton-jl-jt-hd-2-aluminum-steering-kit-non-rubicon-or-narrow-axles","title":"RPM Steering 2.5 Ton JL\/JT HD 2'' Aluminum Steering Kit (Non-Rubicon or Narrow Axles)","description":"\u003cdiv\u003e\u003cspan\u003e2.5 Ton JL\/JT HD 2\" Aluminum Steering Kit\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e(Non-Rubicon or Narrow Axles)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMassive 2\" solid USA made 7075 T6 cold finish aluminum link with hexed ends for easy adjustments\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1.25\" forged TREs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnti-flop ends built-in (excludes pitman arm joint)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSerrated Belleville washers (included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTie rod and drag link included in the kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo drilling required for stock location\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrag link flip option\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cspan\u003ePLEASE NOTE:\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTie rod is a direct bolt-on for stock JL\/JT axles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e17\" wheel or 4.75\" backspacing or less required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAEV or stock wheels will require a 0.75\" wheel spacer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSelect stock location for up to 4\" lift.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor lifts higher than 4.5\", you may need a flip kit. Please call to confirm prior to ordering.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RPM Steering","offers":[{"title":"Flip Kit \/ No Clamp","offer_id":43114310566065,"sku":"RPM-2002","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114310598833,"sku":"RPM-2002SC","price":1079.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114310631601,"sku":"RPM-2002FOX","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114310664369,"sku":"RPM-2002FAL","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114310697137,"sku":"RPM-2002DS","price":1109.98,"currency_code":"USD","in_stock":true},{"title":"Flip Kit \/ Factory Location Stabilizer Clamp (+$99.99)","offer_id":43114310729905,"sku":"RPM-2002FL","price":1099.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location Drag Link - No Taper Sleeve \/ No Clamp","offer_id":43114310762673,"sku":"RPM-2002","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Stock Location Drag Link - No Taper Sleeve \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114310795441,"sku":"RPM-2002SC","price":1079.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location Drag Link - No Taper Sleeve \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114310828209,"sku":"RPM-2002FOX","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location Drag Link - No Taper Sleeve \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114310860977,"sku":"RPM-2002FAL","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location Drag Link - No Taper Sleeve \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114310893745,"sku":"RPM-2002DS","price":1109.98,"currency_code":"USD","in_stock":true},{"title":"Stock Location Drag Link - No Taper Sleeve \/ Factory Location Stabilizer Clamp (+$99.99)","offer_id":43114310926513,"sku":"RPM-2002FL","price":1099.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ No Clamp","offer_id":43114310959281,"sku":"RPM-2002FNT","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114310992049,"sku":"RPM-2002FNTSC","price":1079.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114311024817,"sku":"RPM-2002FNTFOX","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114311057585,"sku":"RPM-2002FNTFAL","price":1089.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114311090353,"sku":"RPM-2002FNTDS","price":1109.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve \/ Factory Location Stabilizer Clamp (+$99.99)","offer_id":43114311123121,"sku":"RPM-2002FNTFL","price":1099.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link Kit - Add Taper Sleeve (+19.99) \/ No Clamp","offer_id":43114311155889,"sku":"RPM-2002F","price":1019.98,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link Kit - Add Taper Sleeve (+19.99) \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114311188657,"sku":"RPM-2002FSC","price":1099.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link Kit - Add Taper Sleeve (+19.99) \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114311221425,"sku":"RPM-2002FFOX","price":1109.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link Kit - Add Taper Sleeve (+19.99) \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114311254193,"sku":"RPM-2002FFAL","price":1109.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link Kit - Add Taper Sleeve (+19.99) \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114311286961,"sku":"RPM-2002FDS","price":1129.97,"currency_code":"USD","in_stock":true},{"title":"Flip Drag Link Kit - Add Taper Sleeve (+19.99) \/ Factory Location Stabilizer Clamp (+$99.99)","offer_id":43114311319729,"sku":"RPM-2002FFL","price":1119.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/25tonrpmsteeringfullkit_77bf0512-a501-4d2e-a2f9-4d0fbec10875.jpg?v=1700849924"},{"product_id":"rpm-steering-2-5-ton-jl-jt-hd-2-aluminum-tie-rod","title":"RPM Steering 2.5 Ton JL\/JT HD 2'' Aluminum Tie Rod","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2.5 Ton JL\/JT HD 2\" Aluminum Tie Rod\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMassive 2'' solid USA made 7075 T6 cold finish aluminum link with hexed ends for easy adjustments\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1.25\" forged TREs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAnti-flop ends built-in (excludes pitman arm joint)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSerrated Belleville washers (included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo drilling required for stock location\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePLEASE NOTE:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTie rod is a direct bolt-on for stock JL\/JT axles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e17\" wheel or 4.75\" backspacing or less required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEV or stock wheels will require a 0.75\" wheel spacer.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"RPM Steering","offers":[{"title":"Rubicon\/Mojave\/Max Tow Package \/ No Clamp","offer_id":43114449698993,"sku":"RPM-2004","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Rubicon\/Mojave\/Max Tow Package \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114449731761,"sku":"RPM-2004SC","price":629.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon\/Mojave\/Max Tow Package \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114449764529,"sku":"RPM-2004FOX","price":639.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon\/Mojave\/Max Tow Package \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114449797297,"sku":"RPM-2004FAL","price":639.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon\/Mojave\/Max Tow Package \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114449830065,"sku":"RPM-2004DS","price":659.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon\/Mojave\/Max Tow Package \/ Factory Location Stabilizer Clamp (+$99.99)","offer_id":43114449862833,"sku":"RPM-2004FL","price":649.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon Axles \/ No Clamp","offer_id":43114449895601,"sku":"RPM-2004N","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon Axles \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114449928369,"sku":"RPM-2004NSC","price":629.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon Axles \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114449961137,"sku":"RPM-2004NFOX","price":639.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon Axles \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114449993905,"sku":"RPM-2004NFAL","price":639.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon Axles \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114450026673,"sku":"RPM-2004NDS","price":659.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon Axles \/ Factory Location Stabilizer Clamp (+$99.99)","offer_id":43114450059441,"sku":"RPM-2004NFL","price":649.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/25tonrpmsteeringtierodjkjl.jpg?v=1700853670"},{"product_id":"rpm-steering-2-5-ton-jl-jt-hd-2-aluminum-drag-link","title":"RPM Steering 2.5 Ton JL\/JT HD 2'' Aluminum Drag Link","description":"\u003cdiv\u003e\u003cspan\u003e2.5 Ton JL\/JT HD 2\" Aluminum Drag Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMassive 2'' solid USA made 7075 T6 cold finish aluminum link with hexed ends for easy adjustments\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1.25\" forged TREs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo drilling required for stock location\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStock location or flip to the top of the knuckle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSerrated Belleville washers (included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrag link is direct bolt-on for stock JL\/JT axles\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003ePLEASE NOTE:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSelect stock location for up to 4\" lift.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor lifts higher than 4.5\", you may need a flip kit. Please call to confirm prior to ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RPM Steering","offers":[{"title":"Stock Location - No Taper Sleeve","offer_id":43114458972337,"sku":"RPM-2006","price":499.99,"currency_code":"USD","in_stock":false},{"title":"Flip Drag Link - I Do Not Need a Taper Sleeve","offer_id":43114459005105,"sku":"RPM-2006FNT","price":499.99,"currency_code":"USD","in_stock":false},{"title":"Flip Drag Link - Add Taper Sleeve (+$19.99)","offer_id":43114459037873,"sku":"RPM-2006F","price":519.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/25tonrpmsteeringdraglinkjkjl.jpg?v=1700854459"},{"product_id":"rpm-steering-jl-jt-yeti-steer-smarts-tie-rod-drag-link-sleeve-replacement-kit","title":"RPM Steering JL\/JT YETI Steer Smarts Tie Rod \u0026 Drag Link Sleeve Replacement Kit","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2'' Yeti Steer Smarts Tie Rod \u0026amp; Drag Link Sleeve Replacement Kit\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTired of bending that pinch sleeve on your Yeti Tie Rod? We have a solution!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur kit features:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(1) Solid 2\" 7075 T6 cold aluminum tie rod replacement center section\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(1) Solid 2\" 7075 T6 cold aluminum drag link replacement center section\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(4) 1.25 x 12 jam nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(4) Belleville lockout washers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetains your Yeti Steer Smarts rod ends\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePLEASE NOTE:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eYou will need a 2\" stabilizer clamp or 2\" PSC clamp to run our tie rod center section.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"RPM Steering","offers":[{"title":"Rubicon \/ No Clamp","offer_id":43114466115761,"sku":"RPM-2013","price":319.99,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114466148529,"sku":"RPM-2013SC","price":399.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114466181297,"sku":"RPM-2013FOX","price":409.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114466214065,"sku":"RPM-2013FAL","price":409.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114466246833,"sku":"RPM-2013DS","price":429.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ No Clamp","offer_id":43114466279601,"sku":"RPM-2013N","price":319.99,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114466312369,"sku":"RPM-2013NSC","price":399.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114466345137,"sku":"RPM-2013NFOX","price":409.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114466377905,"sku":"RPM-2013NFAL","price":409.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114466410673,"sku":"RPM-2013NDS","price":429.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rpm-2010jkyetikit.jpg?v=1700855097"},{"product_id":"rpm-steering-jl-jt-yeti-steer-smarts-tie-rod-sleeve-replacement","title":"RPM Steering JL\/JT YETI Steer Smarts Tie Rod Sleeve Replacement","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2'' Yeti Steer Smarts Tie Rod Sleeve Kit\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eKit features:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(1) Solid 2\" 7075 T6 cold aluminum tie rod replacement center section\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(2) 1.25 x 12 jam nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(2) Belleville lockout washers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetains your Yeti Steer Smarts rod ends\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePLEASE NOTE:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eYou will need a 2\" stabilizer clamp or 2\" PSC clamp to run our tie rod center section.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RPM Steering","offers":[{"title":"Rubicon \/ No Clamp","offer_id":43114478043313,"sku":"RPM-2014","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114478076081,"sku":"RPM-2014SC","price":259.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114478108849,"sku":"RPM-2014FOX","price":269.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114478141617,"sku":"RPM-2014FAL","price":269.98,"currency_code":"USD","in_stock":true},{"title":"Rubicon \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114478174385,"sku":"RPM-2014DS","price":289.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ No Clamp","offer_id":43114478207153,"sku":"RPM-2014N","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Standard Stabilizer Clamp (+$79.99)","offer_id":43114478239921,"sku":"RPM-2014NSC","price":259.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Standard Stabilizer Clamp for FOX ATS (+$89.99)","offer_id":43114478272689,"sku":"RPM-2014NFOX","price":269.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Standard Stabilizer Clamp for Falcon (+$89.99)","offer_id":43114478305457,"sku":"RPM-2014NFAL","price":269.98,"currency_code":"USD","in_stock":true},{"title":"Non Rubicon \/ Double Shear Hydro Assist Clamp (+$109.99)","offer_id":43114478338225,"sku":"RPM-2014NDS","price":289.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rpm-2011jkyetitierod.jpg?v=1700855752"},{"product_id":"rpm-steering-jl-jt-yeti-steer-smarts-drag-link-sleeve-kit","title":"RPM Steering JL\/JT YETI Steer Smarts Drag Link Sleeve Kit","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2'' Yeti Steer Smarts Drag Link Sleeve Kit\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eKit features:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(1) Solid 2\" 7075 T6 cold aluminum drag link center section\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(2) 1.25 x 12 jam nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(2) Belleville lockout washers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetains your Yeti Steer Smarts rod ends\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePLEASE NOTE:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is a complete bolt-in ready kit.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RPM Steering","offers":[{"title":"Default Title","offer_id":43114491740337,"sku":"RPM-2015","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/25draglingreplacementnew.jpg?v=1700856430"},{"product_id":"fox-2-0-ats-steering-stabilizer-1-5-8in-tie-rod-clamp","title":"FOX 2.0 ATS STEERING STABILIZER, 1 5\/8IN TIE ROD CLAMP","description":"\u003cstrong\u003eFOX 2.0 ATS Steering Stabilizer, 1 5\/8in Tie Rod Clamp Features:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cli\u003eAdjustable Through Shaft Stabilizer\u003c\/li\u003e\n\u003cli\u003ePerformance Tuned For Vehicle Specific Application\u003c\/li\u003e\n\u003cli\u003eAluminum Body Dissipates Heat Faster Than Steel\u003c\/li\u003e\n\u003cli\u003eExternal Reservoir With Compression Adjuster\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Cnc Machined Aluminum Components\u003c\/li\u003e\n\u003cspan\u003eThe FOX 2.0 ATS Steering Stabilizer Eliminate Fluid Displacement and Provides Additional Fluid Capacity For a proper off-road steering system, you need to incorporate the FOX 2.0 ATS Steering Stabilizer, 1-5\/8in Tie Rod Clamp into your Jeep Wrangler JK build. This utilizes the Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement all the way throughout the stabilizer's entire travel in either direction. Each stabilizer features a piggy back reservoir that provides additional fluid capacity through an Internal Floating Piston (ISP) which separates the fluid from the nitrogen gas charge eliminating cavitation. For the most customizable and consistent damping, you need this bolt-on stabilizer from FOX Suspension. Unrivaled Steering Control and Striking High-Tech Performance The FOX Factory Race Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX's relocating hardware that moves the steering stabilizer up and out of the way utilizing a new track bar relocation bolt and tie-rod mounting clamp. The ATS represents a revolutionary breakthrough in stabilizer design.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eProduct Specs:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cli\u003eCollapsed Length (IN) - 14.060\u003c\/li\u003e\n\u003cli\u003eExtended Length (IN) - 22.150\u003c\/li\u003e\n\u003cli\u003eTravel Length (IN) - 8.100\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cspan\u003e Jeep Wrangler JK\u003c\/span\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":43263308660913,"sku":"983-02-146","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/J152746-JL.webp?v=1705363538"},{"product_id":"fox-2-0-factory-series-ats-steering-stabilizer-jt-jl","title":"FOX 2.0 FACTORY SERIES ATS STEERING STABILIZER JT\/JL","description":"\u003cp\u003eFOX 2.0 Factory Series ATS Steering Stabilizer Features:\u003cbr data-mce-fragment=\"1\"\u003eRace Series 2.0 ATS Steering Stabilizer\u003cbr data-mce-fragment=\"1\"\u003eImproves handling and road performance\u003cbr data-mce-fragment=\"1\"\u003eCrafted from 6061-T6 hard-anodized aluminum\u003cbr data-mce-fragment=\"1\"\u003eDurable and sleek black finish\u003cbr data-mce-fragment=\"1\"\u003eUtilizes Adjustable Through Shaft (ATS) architecture\u003cbr data-mce-fragment=\"1\"\u003eExternal adjuster for additional fine tuning\u003cbr data-mce-fragment=\"1\"\u003eSold individually\u003cbr data-mce-fragment=\"1\"\u003eBolt-on installation\u003cbr data-mce-fragment=\"1\"\u003e1-Year Limited Warranty\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eFully Functional Steering Stabilizer For better control and handling during both daily driving and off-road applications, equip your jeep with the Fox Factory Race Series 2.0 ATS Steering Stabilizer. This system features an Adjustable Through Shaft (ATS) architecture that cancels opposing steering forces, resulting in increased steering control in any situation. Moreover, it has 24 clicks of adjustment, so you can easily fine tune the stabilizer for feel depending on your terrain. Additionally, the integrated reservoir allows for additional fluid capacity and improves cooling during extreme use and heavy operation. Hard-Anodized Aluminum Construction FOX's steering stabilizer was constructed from 2-inch 6061-T6 hard-anodized aluminum for maximum strength and long-lasting functionality. In addition, the stabilizer was CNC-machined and has undergone an impact extrusion process for the best possible quality and performance. Finally, its body is features a hard-anodized black finish for a high-tech appearance and resistance to rust and corrosion. Installation is made simple and straightforward as this kit was designed for a direct replacement of your stock steering stabilizer. THis kit is also backed by a 1-Year Limited Warranty to help keep your investment protected.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: If you have a 2021 mid-year or newer model Wrangler or Gladiator, with the long square necked mounting bolt, you will need to use the older short square neck mounting bolt, Mopar part number MPR6510774AA.\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":43263324127409,"sku":"983-02-148","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/J152746-JL_ef30a4de-afd2-4615-a3a6-fb6db5eff39c.webp?v=1705363809"},{"product_id":"fox-2-0-ats-steering-stabilizer-stock-1-3-8in-tie-rod-clamp","title":"FOX 2.0 ATS STEERING STABILIZER, STOCK \u0026 1 3\/8IN TIE ROD CLAMP","description":"\u003cp\u003eThe FOX Factory Race Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel.\u003c\/p\u003e\n\u003cp\u003eThe integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX's relocating hardware that moves the steering stabilizer up and out of the way utilizing a new track bar relocation bolt and tie-rod mounting clamp. The ATS represents a revolutionary breakthrough in stabilizer design.\u003c\/p\u003e\n\u003cli\u003eAdjustable Through Shaft Stabilizer\u003c\/li\u003e\n\u003cli\u003ePerformance Tuned For Vehicle Specific Application\u003c\/li\u003e\n\u003cli\u003eAluminum Body Dissipates Heat Faster Than Steel\u003c\/li\u003e\n\u003cli\u003eExternal Reservoir With Compression Adjuster\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Cnc Machined Aluminum Components\u003c\/li\u003e\n\u003cp\u003eCollapsed Length (IN) - 14.060 \u003cbr\u003eExtended Length (IN) - 22.150 \u003cbr\u003eTravel Length (IN) - 8.100 \u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":43263329960113,"sku":"983-02-145","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/J152746-JL_dc529dd6-09a7-4c6f-8fbd-c6f4f601df9e.webp?v=1705363914"},{"product_id":"fox-2-0-ats-steering-stabilizer-1-1-2in-tie-rod-clamp","title":"FOX 2.0 ATS STEERING STABILIZER, 1 1\/2IN TIE ROD CLAMP","description":"\u003cp\u003eThe FOX Factory Race Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel.\u003c\/p\u003e\n\u003cp\u003eThe integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX's relocating hardware that moves the steering stabilizer up and out of the way utilizing a new track bar relocation bolt and  tie-rod mounting clamp. The ATS represents a revolutionary breakthrough in stabilizer design.\u003c\/p\u003e\n\u003cli\u003eAdjustable Through Shaft Stabilizer\u003c\/li\u003e\n\u003cli\u003ePerformance Tuned For Vehicle Specific Application\u003c\/li\u003e\n\u003cli\u003eAluminum Body Dissipates Heat Faster Than Steel\u003c\/li\u003e\n\u003cli\u003eExternal Reservoir With Compression Adjuster\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Cnc Machined Aluminum Components\u003c\/li\u003e\n\u003cp\u003eCollapsed Length (IN) - 14.060 \u003cbr\u003eExtended Length (IN) - 22.150 \u003cbr\u003eTravel Length (IN) - 8.100 \u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":43263335989425,"sku":"983-02-142","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/J152746-JL_325457d0-50ed-4bc9-b92e-025f24895343.webp?v=1705364032"},{"product_id":"fox-2-0-performance-series-ts-steering-stabilizer-1-5-8in-tie-rod","title":"FOX 2.0 PERFORMANCE SERIES TS STEERING STABILIZER - 1 5\/8IN TIE ROD","description":"\u003cp data-mce-fragment=\"1\"\u003eWith conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback. The result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Performance Series 2.0 Stabilizer TS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Body Diameter:\u003c\/strong\u003e 2”\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Body Material:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Body Finish:\u003c\/strong\u003e Clear Hard Anodized\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Component Material:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Component Finish:\u003c\/strong\u003e Black Hard Anodized\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShaft Material:\u003c\/strong\u003e Heat-Treated Steel Alloy\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShaft Finish:\u003c\/strong\u003e Hard Chrome Plating\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePiston:\u003c\/strong\u003e Race-Developed High-Flow Design\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRedundant Valve Seals:\u003c\/strong\u003e Main Seal, Wiper Seal, and Scraper Seal\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Oil:\u003c\/strong\u003e JM92 Advanced Suspension Fluid\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShock Gas:\u003c\/strong\u003e High-Pressure Nitrogen\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBushing Material:\u003c\/strong\u003e Black Nitrile Rubber\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCharge:\u003c\/strong\u003e Neutrally Charged\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eExtended Length:\u003c\/strong\u003e 23.27” (591.06mm)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCollapsed Length:\u003c\/strong\u003e 15.08” (383.03mm)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTravel:\u003c\/strong\u003e 8.19” (208.03mm)\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":43263345885361,"sku":"985-02-122","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/J152755-JL.webp?v=1705364198"},{"product_id":"fox-2-0-performance-series-through-shaft-stabilizer-jt-jl","title":"FOX 2.0 PERFORMANCE SERIES THROUGH SHAFT STABILIZER JT\/JL","description":"\u003cstrong\u003eFOX Performance Series 2.0 TS Steering Stabilizer Features:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cli\u003ePerformance series 2.0 TS steering stabilizer\u003c\/li\u003e\n\u003cli\u003eImproved off-road control and stability\u003c\/li\u003e\n\u003cli\u003eStabilizes vehicle's with oversized tires\u003c\/li\u003e\n\u003cli\u003eThrough shaft design for equal steering pressure\u003c\/li\u003e\n\u003cli\u003eIncludes an internal floating piston\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving technology\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant aluminum body\u003c\/li\u003e\n\u003cli\u003eInstalls quick and easily\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003cli\u003e1-Year Limited warranty\u003c\/li\u003e\n\u003cspan\u003eHigh Performance Through Shaft Stabilizer Mount oversized tires on your Jeep without compromising its handling on bumpy and uneven terrain with this FOX Performance Series 2.0 Through Shaft Steering Stabilizer. Equipped with an internal floating piston, this steering stabilizer will absorb the sudden jolts that are commonly experienced in rugged driving conditions, so you can remain in control no matter how rough the environment becomes. FOX designed this stabilizer with a Through Shaft (TS) feature that provides equal steering pressure in both directions, eliminating the need to install two opposing stabilizers that requires an extra mounting point. The through shaft also helps to keep your vehicle balanced when tackling uneven terrain at a high rate of speed. Moreover, the application-specific valving come with an adjustable feature to help enhance your Jeep's performance for a variety of applications. Heavy-Duty Construction \u0026amp; Warranty Info The FOX Performance Series 2.0 TS Steering Stabilizer was built for a range of aggressive applications, so you can continue tackling trails head on without compromise. Specifically, its body is made out of highly durable aluminum with both a clear anodized and corrosion-resistant finish for fast heat dissipation during harsh driving conditions. It also includes a heavy-duty shaft that is built using 0.62\" hard chrome-plated, and heat-treated steel for remarkable durability. Additionally, the stabilizer's bushings are manufactured from high-quality nitrile rubber for enhanced strength and quiet shock dampening. Installation is simple and straightforward as the stabilizer comes with a bolt-on features and installs using the factory mounting points and included hardware. Best of all, FOX backs this kit with a 1-Year Limited Warranty to help keep your investment protected.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cli\u003eJeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e If you have a 2021 mid-year or newer model Wrangler or Gladiator, with the long square necked mounting bolt, you will need to use the older short square neck mounting bolt, Mopar part number MPR6510774AA.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eBottom Mount: Axle\u003c\/li\u003e\n\u003cli\u003eCollapsed Length: 15.026 in.\u003c\/li\u003e\n\u003cli\u003eColor: Aluminum\u003c\/li\u003e\n\u003cli\u003eExtended Length: 23.220 in.\u003c\/li\u003e\n\u003cli\u003ePosition: N\/A\u003c\/li\u003e\n\u003cli\u003eReservoir Type: Internal Floating Piston (IFP)\u003c\/li\u003e\n\u003cli\u003eSeries: Performance\u003c\/li\u003e\n\u003cli\u003eShock Stroke: 8.194 in.\u003c\/li\u003e\n\u003cli\u003eSize: 2 in.\u003c\/li\u003e\n\u003cli\u003eTop Mount: Eyelet\u003c\/li\u003e\n\u003cli\u003eType: Stabilizer\u003c\/li\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":43263354241201,"sku":"985-02-127","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/J152755-JL_60bb9922-029c-443e-8870-75f5e344d1e9.webp?v=1705364421"},{"product_id":"metalcloak-jeep-jk-wrangler-baller-joints™-hd-ball-joints-full-set","title":"Metalcloak Jeep JK Wrangler Baller Joints™, HD Ball Joints, Full Set","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003e\"BALLER\" Informal adjective:\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eextremely good, impressive or excellent\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eMetalCloak's Baller Joints™ HD Ball Joints for the Jeep JK Wrangler are the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures Include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoad Bearing Upper and Lower Joints\u003c\/li\u003e\n\u003cli\u003eHardened Tool Steel Races\u003c\/li\u003e\n\u003cli\u003eInduction Hardened Chromoly Spindle \u0026amp; Ball\u003c\/li\u003e\n\u003cli\u003eComposite Bushing for Radial Loads\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(Side to Side Movement)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad Rated Composite Bushing at over 23,000lbs-each X2!\u003c\/li\u003e\n\u003cli\u003eFully Sealed top and bottom O-ring AND Shaft Wiper Seals\u003c\/li\u003e\n\u003cli\u003eRecessed Zerk Fittings for Easy Service\/Grease\u003c\/li\u003e\n\u003cli\u003eAdjustable Pre Load for Upper \u0026amp; Lower Joints\u003c\/li\u003e\n\u003cli\u003eIn-JEEP Rebuildable Upper \u0026amp; Lower\u003c\/li\u003e\n\u003cli\u003eGold Zinc, Clear Zinc \u0026amp; Anodized Red Finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":44254410735793,"sku":"1910","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/1910-with-logo.jpg?v=1793547293"},{"product_id":"dynatrac-hd-prosteer-ball-joint-kit-jt-jl","title":"Dynatrac HD ProSteer Ball Joint Kit - JT\/JL","description":"\u003cp\u003e\u003cstrong\u003eDynatrac HD ProSteer Ball Joint Kit Features:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved steering and driver control\u003c\/li\u003e\n\u003cli\u003eCompletely rebuildable\u003c\/li\u003e\n\u003cli\u003eHeat-treated, precision ground stainless steel ball\u003c\/li\u003e\n\u003cli\u003eHigh-strength billet bodies with chromoly stems\u003c\/li\u003e\n\u003cli\u003eSnap ring design eliminates potential movement\u003c\/li\u003e\n\u003cli\u003eDesigned to meet exact OEM quality standards\u003c\/li\u003e\n\u003cli\u003eEngineered to provide reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eHigh-Quality Performance Ball Joint Kit Have you noticed your vehicle wandering on the road, a decreased steering feel, extra wobble, or tire-tread cupping and feathering? If so, it's time to upgrade to the Dynatrac HD ProSteer Ball Joint Kit as it features 4 balljoints, 4 nuts, 4 cotter pins, and 2 safety snap rings. With larger tires, factory balljoints can develop excessive play and movement in as little as 20,00 miles. In order to prevent this from happening, Dynatrac's ProSteer Ball Joint Kit will provide improved steering, strength, and control to your vehicle thanks to the hardcore construction of these ball joints. While the factory balljoints use a nylon insert to house the ball socket in the opening, Dynatrac's HD balljoints use a heat-treated, precision-ground stainless steel ball in a heat-treated, high-strength billet body. This reduces wear to the unit over time to provide impressive durability even during the most extreme applications. Premium Construction \u0026amp; Installation Info Your OEM balljoints often wear quickly with larger off-road tires, so Dynatrac designed their HD Balljoints using high-strength billet bodies and chromoly stems for maximum strength and long-lasting durability. Moreover, these ball joints are completely rebuildable without requiring the balljoint body to be removed from the axle housing. Dynatrac also makes their HD Balljoints with a snap ring to lock the bodies in position as an extra safety provision. Unique seals prevent contamination, and the balljoints have greaseable fittings and Teflon-coated wear points to provide a long, durable life. Installation is made simple an straightforward as these were designed as a direct replacement of your factory components.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Dynatrac","offers":[{"title":"Default Title","offer_id":44312924225713,"sku":"JP44-2X3050-E","price":661.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ilamwit6idqrw0x8um5s.webp?v=1719440756"},{"product_id":"teraflex-falcon-nexus-ef-2-2-adjustable-stabilizer-1-5-8in-tie-rod","title":"TERAFLEX FALCON NEXUS EF 2.2 ADJUSTABLE STABILIZER (1-5\/8IN TIE ROD)","description":"\u003cp\u003e\u003cstrong\u003eTeraflex JK Falcon Nexus EF 2.2 Adjustable Steering Stabilizer Features:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium Adjustable Steering Stabilizer\u003c\/li\u003e\n\u003cli\u003eThree preset stiffness modes: Soft, Medium, and Firm\u003c\/li\u003e\n\u003cli\u003eMaintains smooth movement under rapid turning conditions\u003c\/li\u003e\n\u003cli\u003eNeutrally charged steering stabilization\u003c\/li\u003e\n\u003cli\u003eConstructed using Aircraft-grade 6061-T6 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e5\/8\" Induction hardened chrome plated shaft\u003c\/li\u003e\n\u003cli\u003e2.125\" shock body \u003c\/li\u003e\n\u003cli\u003eInternal hard anodized Billet piston\u003c\/li\u003e\n\u003cli\u003eTeraFlex 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your Wrangler JK's balance and off-road control with the Falcon Nexus Adjustable Steering Stabilizer Improving your Jeep's ride and eliminating steering wander is made easy with the high-performance Teraflex Falcon Nexus EF 2.2 Adjustable Steering Stabilizer. This steering stabilizer comes standard with 3 preset stiffness modes: Soft, Medium, and Firm. Each mode is optimized for either aggressive rock climbing, comfort for daily driving, or highway cruising while using a neutrally charged steering stabilization system. Moreover, these steering stabilizers are designed to meet the exact requirements of your JK Wrangler. This ensures proper weight and balancing for side-to-side steering response and an equal return to center dynamics. Engineered with a focus on fitment and function, these Falcon Steering Stabilizers deliver the best damping characteristics possible. Aircraft grade aluminum construction with corrosion-resistant coating will withstand the tests of time and rugged terrain Teraflex designed their Falcon nexus EF 2.2 Adjustable Steering Stabilizer using 6061-T6 aircraft grade aluminum to resist wear and protect the internal components of the shock. The 2.125\" shock body and 5\/8\" induction hardened chrome plated shaft provides impressive heat dissipation even during extreme off-road applications. An internal hard anodized Billet piston provides even more strength and durability, making this a no-brainer aftermarket mod for any Jeep owner. When it comes to installation, a moderate level of mechanical skills is recommended. Expect this install to take up to 2 hours with a medium degree of difficulty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNOT compatible w\/ TeraFlex High Steer Systems (# 4391000 or # 4390975 or # 4390875).\u003c\/li\u003e\n\u003cli\u003eThe Falcon Nexus EF 2.2 Fast Adjust Steering Stabilizer is also available to fit the stock 1-3\/8” tie rod (# 01-02-22-110-138).\u003c\/li\u003e\n\u003cli\u003eA non-adjustable Falcon Nexus EF 2.1 Steering Stabilizer is available for the stock 1-3\/8” tie rod (# 01-02-21-110-138) or a HD 1-5\/8” (42mm) tie rod (# 01-02-21-110-158).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":44409257689265,"sku":"01-02-22-110-158","price":434.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/uqvjimm7ghthdkgnhbkk.webp?v=1721324382"},{"product_id":"metalcloak-durotrak-track-bar-solid-chromoly-front-jl-wrangler-jt-gladiator","title":"Metalcloak Durotrak Track Bar, Solid Chromoly, Front, JL Wrangler\/JT Gladiator","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJL Wrangler Jeep \u0026amp; JT Gladiator Truck Front Durotrak Heavy Duty Adjustable Track Bar is designed strong to meet the demands of on and off-road driving for your lifted Jeep.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures Include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 4130 1.25 Chromoly\u003c\/li\u003e\n\u003cli\u003ePatented 2 Piece Durotrak Bushings On Both Ends\u003c\/li\u003e\n\u003cli\u003eAdjustable for Length\u003c\/li\u003e\n\u003cli\u003ePrecision Locking Nut\u003c\/li\u003e\n\u003cli\u003eClearance for Factory \u0026amp; Aftermarket Differentials\u003c\/li\u003e\n\u003cli\u003eGold Zinc Plated for Protection Against the Elements\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe Durotrak adjustable front track bar for the \u003c\/span\u003e\u003cspan class=\"extraText\"\u003eJeep JL Wrangler and JT Gladiator is built with Patented Durotrak 2 piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar. The bar is finished in gold zinc for the ultimate in durability against the elements.\u003cbr\u003e\u003cbr\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eThe MetalCloak Front Durotrak Track Bar does not work at stock height.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eWe recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":44852596900017,"sku":"7616","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/7616-with-loddgo.webp?v=1730479313"},{"product_id":"steer-smarts-yeti-xd-double-shear-hydro-assist-6-bolt-tie-rod-clamp-1-5-8in","title":"STEER SMARTS YETI XD DOUBLE SHEAR HYDRO ASSIST 6-BOLT TIE ROD CLAMP 1 5\/8IN","description":"\u003cp\u003eYETI XD™ Machined 1-5\/8\" Double Shear Hydro bracket is designed to give you a double shear mounting solution for your hydro assist ram. All hardware is magnicoated grade 8 hardware. Tabs are 1\/4\" wall that is welded all the way around for maximum strength. The steel bracket is then e-coated for maximum corrosion resistance and chip resistance. \u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572076761265,"sku":"79055001","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/utefvomucon02pzmxszo.jpg?v=1767932086"},{"product_id":"steer-smarts-yeti-xd-bridge-clamp-upgrade-for-1-625in-steel-tie-rod-adjuster-sleeve","title":"STEER SMARTS YETI XD BRIDGE CLAMP UPGRADE FOR 1.625IN STEEL TIE ROD ADJUSTER SLEEVE","description":"\u003cp\u003eThe bridge clamp upgrade kit is designed to improve the strength of our chromoly tie rod assembly but to increase the clamping area to include the tie rod forging as well. This improvement decreases the likelihood of a bend to the tube or the forging due to an impact with an obstacle\/rock while off-roading. This upgrade kit will work for JK, JL, or JT Yeti XD™ Tie Rod assemblies utilizing our 1-5\/8\" chromoly steel adjuster sleeve.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003e CNC Machined Insert\u003cbr\u003e\n\tT6 6061 Clamp\u003cbr\u003e\n\tGrade 8 Magnicoated Hardware\u003cbr\u003e\n\tBolt-on design\u003cbr\u003e\n\t MADE IN THE USA\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBenefits\u003c\/p\u003e\n\n\n\t\u003cp\u003eStrength improvement over over 60%\u003cbr\u003e\n\tImproved strength means decreased chances of bending tube \/ forging\u003cbr\u003e\n\tLow torque requirement - 85 lb-ft\u003cbr\u003e\n\tEasy bolt-on installation with minimal modification needed\u003cbr\u003e\n\t1\/4\" Wall steel laser-cut bracket\u003cbr\u003e\n\t1\/2\" steel Sector Support with Sealed Roller Bearing\u003cbr\u003e\n\tAll upgraded fasteners included\u003cbr\u003e\n\tE-coated for corrosion resistance that won't chip when torqued\u003cbr\u003e\n\tMADE IN THE USA\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572076859569,"sku":"43044001","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/kloquw2okrzl3b3y3wbg.jpg?v=1767932095"},{"product_id":"steer-smarts-yeti-xd-pro-series-aluminum-tie-rod-for-dynatrac-prorock-xd60-72-5in-width-axle","title":"STEER SMARTS YETI XD PRO SERIES ALUMINUM TIE ROD FOR DYNATRAC PROROCK XD60 72.5IN WIDTH AXLE","description":"\u003cp\u003eSTEER SMARTS presents our most EXTREME steering linkage “The YETI XD™ Pro-Series” linkage for your Jeep. We applied our 85 years of steering “lessons learned” to develop the strongest most durable linkage ever built for the Wrangler. \u003c\/p\u003e\n\n\u003cp\u003eThe YETI XD Tie Rod is a direct bolt-on for any vehicle running the Dynatrac Pro Rock XD60 72.5\" wide axle.  The YETI XD Tie Rod is a quick and easy install and there is no need to modify or alter Jeep.\u003c\/p\u003e\n\n\u003cp\u003eYETI XD TIE ROD ASSEMBLY:\u003c\/p\u003e\n\n\n\t\u003cp\u003eEasy bolt-on installation.\u003cbr\u003e\n\tEngineered for proper clearance to other chassis components to eliminate interferences.\u003cbr\u003e\n\tMADE IN THE USA\u003c\/p\u003e\n\n\n\u003cp\u003eBALL JOINTS:\u003c\/p\u003e\n\n\n\t\u003cp\u003e30mm 2 1\/2 Ton ball joints.\u003cbr\u003e\n\tCold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.\u003cbr\u003e\n\tInduction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability.\u003cbr\u003e\n\tSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003cbr\u003e\n\tHigh-quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals, which greatly improves our ball joint reliability over our competition.\u003cbr\u003e\n\tFully greaseable.\u003c\/p\u003e\n\n\n\u003cp\u003eTIE ROD ENDS:\u003c\/p\u003e\n\n\n\t\u003cp\u003ePowder coat over E-coat for a long-lasting appearance under harsh conditions.\u003cbr\u003e\n\tExternal threads are e-coated for durability and long-term serviceability.\u003cbr\u003e\n\tForged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength.\u003cbr\u003e\n\tLarge 1 ¼ inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003cbr\u003e\n\tUnique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages.\u003c\/p\u003e\n\n\n\u003cp\u003eADJUSTER SLEEVE: \u003c\/p\u003e\n\n\n\t\u003cp\u003eEasy bolt-on installation.\u003cbr\u003e\n\tEngineered for proper clearance to other chassis components to eliminate interferences.\u003cbr\u003e\n\tTie Rod adjuster is manufactured from large 1-3\/4\" diameter solid high strength 7075 Aluminum for maximum strength.\u003cbr\u003e\n\tPro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003cbr\u003e\n\tDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003cbr\u003e\n\tHard coated for long term serviceability and durability.\u003c\/p\u003e\n\n\n\u003cp\u003eTORQUE SPECS:\u003c\/p\u003e\n\n\n\t\u003cp\u003eClamps need to be torqued to 80-85 ft lbs, and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling\/off-roading. \u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNotes\u003c\/p\u003e\n\n\u003cp\u003e**Requires a 1 3\/4\" diameter damper bracket that is not included.\u003c\/p\u003e\n\n\u003cp\u003e**Requires Stabilizer Relocation Bracket (not included)\u003c\/p\u003e\n\n\u003cp\u003e**Requires Button Head Bolt (not included): Please see Button Head Bolt\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eQ: What is it made from?\u003c\/p\u003e\n\n\u003cp\u003eA: The main bar is 7075-T6 aluminum, providing exceptional strength with reduced weight. It also features the Pro-Series silver adjuster tube for on-vehicle alignment adjustment and durability.\u003c\/p\u003e\n\n\u003cp\u003eQ: What are the benefits of aluminum over steel?\u003c\/p\u003e\n\n\u003cp\u003eA: Aluminum offers corrosion resistance, lighter weight, and better memory characteristics—meaning it can flex slightly under extreme stress without permanently deforming.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572076925105,"sku":"78092001","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/zdipwb6l8gilw4oq5q5g.jpg?v=1767932100"},{"product_id":"steer-smarts-yeti-hd-no-drill-top-mount-outer-draglink-end-w-griffin-attenuator","title":"STEER SMARTS YETI HD NO DRILL TOP MOUNT OUTER DRAGLINK END W\/GRIFFIN ATTENUATOR","description":"\u003cp\u003eThe YETI HD™ 26 Series linkage was engineered from the ground up with extreme detail to every component. The YETI HD 26 with the Griffin attenuator is a highly engineered direct bolt-on for your lifted Jeep JK. This top mounted draglink end and attenuator combo will help realign the steering geometry of Jeep JKs with more than a 3.5\" lift and will reduces the harsh road feedback inherent in the stock JK steering system.\u003c\/p\u003e\n\n\u003cp\u003eThis top mount kit features our Patent Pending REVERSE TAPER MOUNT for ease of installation and requires no modifications to the stock knuckle and bolts to the factory tapered knuckle and factory upper draglink end.\u003c\/p\u003e\n\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\n\u003cp\u003eOUTER DRAG LINK ASSEMBLY:\u003cbr\u003e\n \u003c\/p\u003e\n\n\n\t\u003cp\u003eEasy bolt-on installation.\u003cbr\u003e\n\tE-coated for a long lasting appearance under harsh conditions.\u003cbr\u003e\n\tEngineered for proper clearance to other chassis components to eliminate interferences.\u003cbr\u003e\n\tPatent Pending \"No Drill\" Reverse Taper Mount makes for a quick and easy installation without the need of drilling or altering your knuckle.\u003cbr\u003e\n\tExternal threads are e-coated for durability and long term serviceability.\u003cbr\u003e\n\tForged from 15v41 medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.\u003cbr\u003e\n\tMADE IN THE USA\u003c\/p\u003e\n\n\n\u003cp\u003eBALL JOINT:\u003cbr\u003e\n \u003c\/p\u003e\n\n\n\t\u003cp\u003e26mm ball joint.\u003cbr\u003e\n\tCold headed medium carbon alloy steel ball studs provide incredible impact toughness.\u003cbr\u003e\n\tBall studs are also induction heat treated - greatly improving their ultimate and fatigue strength, as well as wear resistance for superior off road durability.\u003cbr\u003e\n\tSteel bearings are also used for exceptional ball joint wear resistance and robustness.\u003cbr\u003e\n\tHigh quality OE style seal that ensures longer ball joint life.\u003cbr\u003e\n\tBall joint is greaseable for greater reliability.  \u003c\/p\u003e\n\n\n\u003cp\u003eGRIFFIN HD:\u003c\/p\u003e\n\n\n\t\u003cp\u003eReduces harsh and negative feedback to your steering wheel.\u003cbr\u003e\n\tEasy Bolt On Installation.\u003cbr\u003e\n\tDesigned for the proper clearance to other chassis components to eliminate interferences.\u003cbr\u003e\n\tE-coated for a long lasting appearance under harsh conditions.\u003cbr\u003e\n\tPatented Design.\u003cbr\u003e\n\tMADE IN THE USA.\u003c\/p\u003e\n\n\n\u003cp\u003eOuter Draglink End fits all left hand drive JK Wrangler models 2007 to 2017 including Rubicon and Unlimited.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eQ: What does the Griffin Steering Attenuator do?\u003c\/p\u003e\n\n\u003cp\u003eA: The Griffin Attenuator absorbs road vibration and steering shock to reduce harshness felt at the wheel. It greatly improves on-road comfort, stability, and driver control, particularly when running larger tires or lifted suspension.\u003c\/p\u003e\n\n\u003cp\u003eQ: What makes this a “no-drill” top mount joint?\u003c\/p\u003e\n\n\u003cp\u003eA: It uses a specially designed tapered insert that allows you to relocate the draglink to the top of the passenger knuckle without drilling or modifying the factory taper.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572077187249,"sku":"77058003","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/x1sv50vt4qeg9eozevcd.jpg?v=1767932119"},{"product_id":"steer-smarts-yeti-hd26-drag-link-replacement-boot-seal","title":"Steer Smarts Yeti HD26 Drag Link Replacement Boot Seal","description":"\u003cp\u003eReplacement YETI HD \"26\" Boot Seal (Draglink Outer End).\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572077252785,"sku":"53048002","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/xj3rjgmx2zlo5ziy7h9q.jpg?v=1767932144"},{"product_id":"steer-smarts-yeti-xd-replacement-reverse-taper-sleeve-for-no-drill-top-mount-drag-link","title":"STEER SMARTS YETI XD REPLACEMENT REVERSE TAPER SLEEVE FOR NO DRILL TOP MOUNT DRAG LINK","description":"\u003cp\u003eIncludes\u003c\/p\u003e\n\n\n\t\u003cp\u003e(1) Replacement Taper Sleeve\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572077285553,"sku":"47042002","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ku0gjnsvjaylonlnlen1.jpg?v=1767932148"},{"product_id":"steer-smarts-yeti-xd-tie-rod-and-drag-link-package","title":"STEER SMARTS YETI XD TIE ROD AND DRAG LINK PACKAGE","description":"\u003cp\u003eUpgrade your vehicle's steering system today with Steer Smarts Tie Rod and Drag Link Package. Experience improved steering control, enhanced durability, and a more enjoyable driving experience overall.\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572077318321,"sku":null,"price":1173.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/c5ukbgzh4wkeqmbewrrl.jpg?v=1767932149"},{"product_id":"steer-smarts-yeti-hd-26-no-drill-top-mount-outer-drag-link-end","title":"STEER SMARTS YETI HD 26 'NO DRILL' TOP MOUNT OUTER DRAG LINK END","description":"\u003cp\u003eThe YETI HD 26 Series linkage was engineered from the ground up with extreme detail to every component. This HD top mounted Draglink end is a direct bolt on for high steer applications. The YETI HD 26 features our patent pending \"No Drill\" REVERSE TAPER MOUNT, making it the easiest way to top mount your draglink. No modifications of the knuckle is required and bolts directly to the factory tapered knuckle and factory draglink adjuster sleeve.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\u003cp\u003eOUTER DRAG LINK ASSEMBLY:\u003c\/p\u003e\n\n\n\t\u003cp\u003eEasy bolt-on installation.\u003cbr\u003e\n\tE-coated for a long-lasting appearance under harsh conditions.\u003cbr\u003e\n\tEngineered for proper clearance to other chassis components to eliminate interferences.\u003cbr\u003e\n\tPatent Pending \"No Drill\" Reverse Taper Mount makes for a quick and easy installation without the need of drilling or altering your knuckle.\u003cbr\u003e\n\tExternal threads are e-coated for durability and long-term serviceability.\u003cbr\u003e\n\tForged from 15v41 medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.\u003cbr\u003e\n\tMADE IN THE USA\u003c\/p\u003e\n\n\n\u003cp\u003eBALL JOINT:\u003c\/p\u003e\n\n\n\t\u003cp\u003e26mm ball joint.\u003cbr\u003e\n\tCold headed medium carbon alloy steel ball studs provide incredible impact toughness.\u003cbr\u003e\n\tBall studs are also induction heat treated - greatly improving their ultimate and fatigue strength, as well as wear resistance for superior off-road durability.\u003cbr\u003e\n\tSteel bearings are also used for exceptional ball joint wear resistance and robustness.\u003cbr\u003e\n\tHigh quality OE style seal that ensures longer ball joint life.\u003cbr\u003e\n\tBall joint is greaseable for greater reliability.  \u003c\/p\u003e\n\n\n\u003cp\u003eOuter Draglink End fits all left-hand drive JK Wrangler models 2007 to 2016 including Rubicon and Unlimited.\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572077646001,"sku":"77058006","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/n4vi2ffr1ftpq7vq0oz3.jpg?v=1767932161"},{"product_id":"steer-smarts-yeti-xd™-pro-series-aluminum-tie-rod-for-dynatrac-prorock-xd60-72-5in-axle","title":"STEER SMARTS YETI XD™ PRO-SERIES ALUMINUM TIE ROD FOR DYNATRAC PROROCK XD60 72.5IN AXLE","description":"\u003cp\u003eSTEER SMARTS™ presents most EXTREME Tie Rod Adjuster “The YETI XD™ Pro-Series” Aluminum Tie Rod Adjuster Tube for the Dynatrac ProRock XD60 72.5\" Wide Axle\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eEasy bolt-on installation.\u003cbr\u003e\n\tEngineered for proper clearance to other chassis components to eliminate interferences.\u003cbr\u003e\n\tTie Rod adjuster is manufactured from large 1-3\/4\" diameter solid high strength 7075 Aluminum for maximum strength.\u003cbr\u003e\n\tPro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003cbr\u003e\n\tDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003cbr\u003e\n\tHard coated for long term serviceability and durability.\u003cbr\u003e\n\tRaw Alum Finish\u003cbr\u003e\n\tDirect replacement for Yeti XD Tie Rod with Chromoly adjuster tube\u003cbr\u003e\n\tMADE IN THE USA\u003c\/p\u003e\n\n\n\u003cp\u003e TORQUE SPECS:\u003c\/p\u003e\n\n\u003cp\u003eClamps need to be torqued to 80-85 ft lbs, and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque need to be checked at 500 miles, and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling\/off-roading.\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":46572077711537,"sku":"07123001","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/uifwm1ehpaf0ksieddrd.jpg?v=1767932165"},{"product_id":"fox-2-0-performance-series-racing-ats-steering-stabilizer","title":"FOX 2.0 PERFORMANCE SERIES RACING ATS STEERING STABILIZER","description":"\u003cp\u003eThe Fox Performance Series Adjustable Through Shaft (ATS) steering stabilizer offers abundant steering control, and tames unwanted steering forces in both directions. This unit replaces your conventional stabilizers, and it will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity, and improves cooling under extreme conditions. \u003c\/p\u003e\n\n\u003cp\u003eAlso included is FOX’s relocating hardware that moves the steering stabilizer up, and out of the way utilizing a new track bar relocation bolt and tie-rod  mounting clamp. \u003c\/p\u003e\n\n\u003cp\u003ePlease note that if installing the stabilizer on 2012 and newer models with stock suspension or with less than a 2.5” lift and aftermarket 1 ¼” bump stop extension; the stabilizer reservoir must be rotated for clearance. Loosen pinch bolt on L-bracket between stabilizer and track bar clamp, rotate reservoir approximately 135 degrees down, and toward the rear of the vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eQ: What does ATS (Advanced Tuning System) technology do?\u003c\/p\u003e\n\n\u003cp\u003eA: ATS allows precise valving for better steering feedback, improved damping, and reduced bump steer during off-road and on-road driving.\u003c\/p\u003e\n\n\u003cp\u003eQ: Is the FOX 2.0 Racing ATS Steering Stabilizer adjustable?\u003c\/p\u003e\n\n\u003cp\u003eA: Yes, the ATS system provides adjustable damping to customize steering response based on driving conditions.\u003c\/p\u003e\n\n\u003cp\u003eQ: What tools are needed for installation?\u003c\/p\u003e\n\n\u003cp\u003eA: Basic hand tools and moderate mechanical skills are sufficient; installation uses existing mounting points and takes about an hour.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572283953329,"sku":"983-02-070","price":445.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fox983-02-070_01.jpg?v=1767943683"},{"product_id":"fox-2-0-performance-series-ifp-racing-steering-stabilizer","title":"FOX 2.0 PERFORMANCE SERIES IFP RACING STEERING STABILIZER","description":"\u003cp\u003eFOX 2.0 IFP Racing Steering Stabilizer Features:\u003c\/p\u003e\n\n\t\u003cp\u003eRace-developed high-flow piston design\u003cbr\u003e\n\tInternal IFP monotube reservoir\u003cbr\u003e\n\tJM92 advanced suspension fluid\u003cbr\u003e\n\tApplication-specific valving\u003cbr\u003e\n\tRedundant sealing pack system\u003cbr\u003e\n\t2.0\" metal impacted 6061-T6 aluminum construction\u003cbr\u003e\n\tCNC Machined billet aluminum components\u003cbr\u003e\n\tClear-anodized for a durable finish\u003cbr\u003e\n\tQuiet nitrile rubber\u003cbr\u003e\n\tStraightforward installation\u003cbr\u003e\n\t1-Year Limited Warranty\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eRace-Developed Performance Series Steering Stabilizer\u003cbr\u003e\nOne of the easiest and most effective ways to improve your vehicle's stability and handling for both on and off-road applications is by investing in a high-quality steering stabilizer. The FOX 2.0 Performance Series IFP Racing Steering Stabilizer was designed to do just that as it features a design based off their race-dominating Performance Series Shocks. This system features an internal floating piston (IFP) and monotube design that isolates the shock fluid from the high-pressure nitrogen for maximum damping and fade-free performance in any terrain. Moreover, this stabilizer will take the load off steering components on lifted rigs with massive tires, keeping your vehicle straight and true no matter where you venture. Better yet, this system is 100% re-buildable and re-valveable which allows for adjustment to the nitrogen pressure, as well as compression valving and rebound valving.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003ePremium Construction \u0026amp; Warranty Info\u003cbr\u003e\nConstructed from 2\" metal impacted 6061-T6 aluminum, this steering stabilizer will be able to handle even the most extreme driving conditions. Likewise, the unit utilizes a 5\/8\" hard chrome-plated and heat-treated alloy steel shaft that defies pitting and scratching to deliver consistent performance without compromise. The redundant seal packing system utilizes main seal, wiper seal, and scraper seal to ensure this unit will remain protected from dust and moisture when you're out on the trails. Additionally, nitrile rubber allows for increases suspension articulation bushings. Installation is made easy as this unit installs as a direct replacement of your existing components without the need for further modifications. Best of all, this kit is backed by a 1-Year Limited Warranty to help keep your investment protected.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eNOTE: Because this is not a thru-shaft style stabilizer, this unit will steer your vehicle slightly left. To avoid this, purchase a thru-shaft style stabilizer.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eQ: How does IFP technology enhance the steering stabilizer?\u003c\/p\u003e\n\n\u003cp\u003eA: IFP separates the hydraulic fluid and nitrogen gas, reducing aeration for consistent damping and better steering response.\u003c\/p\u003e\n\n\u003cp\u003eQ: What benefits does the FOX 2.0 Performance Series steering stabilizer provide?\u003c\/p\u003e\n\n\u003cp\u003eA: It reduces bump steer, vibrations, and harshness, improving vehicle control and driver comfort on- and off-road.\u003c\/p\u003e\n\n\u003cp\u003eQ: Can I install this steering stabilizer myself?\u003c\/p\u003e\n\n\u003cp\u003eA: Yes, installation requires basic hand tools and moderate mechanical skills, fitting existing mounting points.\u003c\/p\u003e\n\n\u003cp\u003eQ: How does the FOX 2.0 steering stabilizer improve lifted Jeep performance?\u003c\/p\u003e\n\n\u003cp\u003eA: It enhances steering stability, reduces wobble and feedback from rough terrain, and complements suspension upgrades.\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572284051633,"sku":"985-24-145","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/fox980-24-986_01.jpg?v=1767943685"},{"product_id":"fox-2-0-factory-series-ats-steering-stabilizer","title":"FOX 2.0 FACTORY SERIES ATS STEERING STABILIZER","description":"\u003cp\u003eFOX 2.0 Factory Series ATS Steering Stabilizer Features:\u003c\/p\u003e\n\n\u003cp\u003eRace Series 2.0 ATS Steering Stabilizer\u003cbr\u003e\nImproves handling and road performance\u003cbr\u003e\nCrafted from 6061-T6 hard-anodized aluminum\u003cbr\u003e\nDurable and sleek black finish\u003cbr\u003e\nUtilizes Adjustable Through Shaft (ATS) architecture\u003cbr\u003e\nExternal adjuster for additional fine tuning\u003cbr\u003e\nSold individually\u003cbr\u003e\nBolt-on installation\u003cbr\u003e\n1-Year Limited Warranty\u003c\/p\u003e\n\n\n\u003cp\u003eFully Functional Steering Stabilizer\u003c\/p\u003e\n\n\u003cp\u003eFor better control and handling during both daily driving and off-road applications, equip your jeep with the Fox Factory Race Series 2.0 ATS Steering Stabilizer. \u003cbr\u003e\nThis system features an Adjustable Through Shaft (ATS) architecture that cancels opposing steering forces, resulting in increased steering control in any situation. \u003cbr\u003e\nMoreover, it has 24 clicks of adjustment, so you can easily fine tune the stabilizer for feel depending on your terrain. Additionally, the integrated reservoir allows \u003cbr\u003e\nfor additional fluid capacity and improves cooling during extreme use and heavy operation.\u003c\/p\u003e \n\n\u003cp\u003eHard-Anodized Aluminum Construction\u003c\/p\u003e\n\n\u003cp\u003eFOX's steering stabilizer was constructed from 2-inch 6061-T6 hard-anodized aluminum for maximum strength and long-lasting functionality. In addition, the stabilizer was \u003cbr\u003e\nCNC-machined and has undergone an impact extrusion process for the best possible quality and performance. Finally, its body is features a hard-anodized black finish for a high-tech appearance \u003cbr\u003e\nand resistance to rust and corrosion. Installation is made simple and straightforward as this kit was designed for a direct replacement of your stock steering stabilizer. THis kit \u003cbr\u003e\nis also backed by a 1-Year Limited Warranty to help keep your investment protected.\u003c\/p\u003e \n\n\u003cp\u003eNote: If you have a 2021 mid-year or newer model Wrangler or Gladiator, with the long square necked mounting bolt, you will need to use the older short square neck mounting bolt, Mopar part number MPR6510774AA.\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572285558961,"sku":"983-02-148","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/r2kppdpj2a1dpttnnkai.jpg?v=1767943707"},{"product_id":"fox-2-0-performance-series-through-shaft-stabilizer","title":"FOX 2.0 PERFORMANCE SERIES THROUGH SHAFT STABILIZER","description":"\u003cp\u003eFOX Performance Series 2.0 TS Steering Stabilizer Features:\u003c\/p\u003e\n\n\t\u003cp\u003ePerformance series 2.0 TS steering stabilizer\u003cbr\u003e\n\tImproved off-road control and stability\u003cbr\u003e\n\tStabilizes vehicle's with oversized tires\u003cbr\u003e\n\tThrough shaft design for equal steering pressure\u003cbr\u003e\n\tIncludes an internal floating piston\u003cbr\u003e\n\tApplication-specific valving technology\u003cbr\u003e\n\tCorrosion-resistant aluminum body\u003cbr\u003e\n\tInstalls quick and easily\u003cbr\u003e\n\tSold individually\u003cbr\u003e\n\t1-Year Limited warranty\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eHigh Performance Through Shaft Stabilizer\u003cbr\u003e\nMount oversized tires on your Jeep without compromising its handling on bumpy and uneven terrain with this FOX Performance Series 2.0 Through Shaft Steering Stabilizer. Equipped with an internal floating piston, this steering stabilizer will absorb the sudden jolts that are commonly experienced in rugged driving conditions, so you can remain in control no matter how rough the environment becomes. FOX designed this stabilizer with a Through Shaft (TS) feature that provides equal steering pressure in both directions, eliminating the need to install two opposing stabilizers that requires an extra mounting point. The through shaft also helps to keep your vehicle balanced when tackling uneven terrain at a high rate of speed. Moreover, the application-specific valving come with an adjustable feature to help enhance your Jeep's performance for a variety of applications.\u003c\/p\u003e\n\n\u003cp\u003eHeavy-Duty Construction \u0026amp; Warranty Info\u003cbr\u003e\nThe FOX Performance Series 2.0 TS Steering Stabilizer was built for a range of aggressive applications, so you can continue tackling trails head on without compromise. Specifically, its body is made out of highly durable aluminum with both a clear anodized and corrosion-resistant finish for fast heat dissipation during harsh driving conditions. It also includes a heavy-duty shaft that is built using 0.62\" hard chrome-plated, and heat-treated steel for remarkable durability. Additionally, the stabilizer's bushings are manufactured from high-quality nitrile rubber for enhanced strength and quiet shock dampening. Installation is simple and straightforward as the stabilizer comes with a bolt-on features and installs using the factory mounting points and included hardware. Best of all, FOX backs this kit with a 1-Year Limited Warranty to help keep your investment protected.\u003c\/p\u003e\n\n\u003cp\u003e \u003cbr\u003e\nVehicle Fitment:\u003c\/p\u003e\n\n\n\t\u003cp\u003eJeep Gladiator JT\u003cbr\u003e\n\tJeep Wrangler JL\u003c\/p\u003e\n\n\n\u003cp\u003e \u003cbr\u003e\nNote: If you have a 2021 mid-year or newer model Wrangler or Gladiator, with the long square necked mounting bolt, you will need to use the older short square neck mounting bolt, Mopar part number MPR6510774AA.\u003c\/p\u003e\n\n\u003cp\u003e \u003cbr\u003e\nSpecifications:\u003c\/p\u003e\n\n\n\t\u003cp\u003eBody Material: Aluminum\u003cbr\u003e\n\tBottom Mount: Axle\u003cbr\u003e\n\tCollapsed Length: 15.026 in.\u003cbr\u003e\n\tColor: Aluminum\u003cbr\u003e\n\tExtended Length: 23.220 in.\u003cbr\u003e\n\tPosition: N\/A\u003cbr\u003e\n\tReservoir Type: Internal Floating Piston (IFP)\u003cbr\u003e\n\tSeries: Performance\u003cbr\u003e\n\tShock Stroke: 8.194 in.\u003cbr\u003e\n\tSize: 2 in.\u003cbr\u003e\n\tTop Mount: Eyelet\u003cbr\u003e\n\tType: Stabilizer\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eQ:  What does “through shaft” mean in this stabilizer?\u003c\/p\u003e\n\n\u003cp\u003eA: The stabilizer’s piston shaft passes through the center, providing balanced damping and better performance compared to traditional designs.\u003c\/p\u003e\n\n\u003cp\u003eQ: Can this stabilizer be used with aftermarket lift kits?\u003c\/p\u003e\n\n\u003cp\u003eA: Yes, it’s compatible with stock and lifted Jeep JT and JL models, helping control steering issues that arise with lifts.\u003c\/p\u003e\n\n\u003cp\u003eQ: What is the Fox 2.0 Performance Series Through Shaft Steering Stabilizer?\u003c\/p\u003e\n\n\u003cp\u003eA: It’s a high-performance steering stabilizer designed to reduce steering vibrations and improve control on Jeep JT Gladiator and JL Wrangler models.\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572286673073,"sku":"985-02-127","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/b2k8r3vjyjpjjs59v1s0.jpg?v=1767943729"},{"product_id":"fox-2-0-ts-steering-stabilizer-stock-1-3-8in-tie-rod-clamp","title":"FOX 2.0 TS STEERING STABILIZER, STOCK \u0026 1 3\/8IN TIE ROD CLAMP","description":"\u003cp\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback. The result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer. The Performance Series 2.0 Stabilizer TS includes application specific mounting hardware.\u003c\/p\u003e\n\n\n\t\u003cp\u003e2.0\" impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time\u003cbr\u003e\n\tClear-anodized for a durable finish\u003cbr\u003e\n\tExternal reservoir design separates shock oil from the high-pressure nitrogen\u003cbr\u003e\n\tBlack-anodized, CNC-machined 6061-T6 billet aluminum\u003cbr\u003e\n\tShaft-5\/8\" hard chrome plated heat treated alloy steel\u003cbr\u003e\n\tRedundant sealing pack system main seal, wiper seal, scraper seal\u003cbr\u003e\n\tJM92 Advanced Suspension Fluid for improved performance at variable temperatures\u003cbr\u003e\n\tQuiet nitrile rubber allows for increased suspension articulation\u003cbr\u003e\n\tDirect replacement for stock and aftermarket lifts kits\u003cbr\u003e\n\tTravel (in) 8.190\u003cbr\u003e\n\tCompressed (in) 15.080\u003cbr\u003e\n\tExtended (in) 23.270\u003cbr\u003e\n\tTop Mount Eyelet\u003c\/p\u003e\n\n\n\u003cp\u003eBottom Mount  Tie Rod Clamp\u003c\/p\u003e\n\n\u003cp\u003eFitment notes: Stock \u0026amp; 1-3\/8 in. Tie rod\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003eQ: What makes the Fox 2.0 TS Steering Stabilizer different from standard stabilizers?\u003c\/p\u003e\n\n\u003cp\u003eA: The Fox 2.0 TS (Through Shaft) Steering Stabilizer uses a dual-shaft design that eliminates shaft displacement. This results in balanced damping in both directions, delivering smoother, more consistent steering performance without directional bias.\u003c\/p\u003e\n\n\u003cp\u003eQ: Can I use this stabilizer with a lift kit and larger tires?\u003c\/p\u003e\n\n\u003cp\u003eA: Yes, it’s ideal for lifted JKs with oversized tires, as it helps manage the additional stress on the steering system and improves overall control.\u003c\/p\u003e\n\n\u003cp\u003eQ: Does this stabilizer affect steering feel during regular driving?\u003c\/p\u003e\n\n\u003cp\u003eA: It improves on-road steering feel by reducing unwanted motion and enhancing feedback, particularly over uneven or poorly maintained roads.\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572287295665,"sku":"985-02-121","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hr7oaxc211cr2ea4zzlz.jpg?v=1767943746"},{"product_id":"fox-2-0-performance-series-ifp-steering-stabilizer","title":"FOX 2.0 PERFORMANCE SERIES IFP STEERING STABILIZER","description":"\u003cp\u003eFox 2.0 Performance Series IFP Steering Stabilizer Features:\u003c\/p\u003e\n\n\t\u003cp\u003eScraper seal, wiper seal, and redundant sealing pack system main seal\u003cbr\u003e\n\tApplication specific valving\u003cbr\u003e\n\tJM92 Advanced Suspension Fluid Oil\u003cbr\u003e\n\tHard chrome plated 5\/8\" heat treated alloy steel shaft\u003cbr\u003e\n\tBlack anodized 6061-T6 billet aluminum components\u003cbr\u003e\n\tRace-developed high-flow piston design\u003cbr\u003e\n\tNitrile rubber bushings\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe Fox 2.0 Performance Series IFP Steering Stabilizer Relieves the Load Off Steering Components\u003cbr\u003e\nWith heavy off-road use, your steering components can take a beating trying the to navigate the challenging trails. Without proper stabilization, you could hinder your off-road performance, wear down your tires, or cause possible damage to these key components. The Fox 2.0 Performance Series IFP Steering Stabilizer relieves some of the load off these steering components that will keep your tires straight, stable, and true. This is especially important when running oversized off-road tires because they have a tendency to seek out traction on whatever they make contact with. If your tires are not stable, then their large knobs and open tread pattern will cause the front end to wander when driving off-road.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eSame Damping Technology as FOX Performance Series Shocks\u003cbr\u003e\nEach Fox 2.0 Performance Series IFP Steering Stabilizer utilizes the same damping technology that is incorporated into the FOX Performance Series shocks. This damping technology is meant to tame the steering feedback that you get from aggressive, oversized off-road tires. You will feel the full control over front end drifting and sudden jolts from bumps in the terrain that can make any off-road experience one that will leave you sore in the morning. No matter how challenging the trails, this stabilizer is engineered to not fade even under heavy use. The high pressure gas nitrogen gas and nitrogen never combine to cause aeration. The strong aluminum construction allows the stabilizer to resist rust and dissipate heat faster for a long-lasting suspension investment. The reservoir design is a monotube that keeps the oil and nitrogen gas separate and is sealed to the maximum with a scraper seal, wiper seal, and redundant sealing pack system main seal.\u003c\/p\u003e\n\n\u003cp\u003e \u003cbr\u003e\nFitment:\u003c\/p\u003e\n\n\n\t\u003cp\u003eJeep Wrangler JL\u003cbr\u003e\n\tJeep Gladiator JT\u003c\/p\u003e\n\n\n\u003cp\u003e \u003cbr\u003e\nImportant Notes:\u003c\/p\u003e\n\n\n\t\u003cp\u003eBecause this is not a thru-shaft style stabilizer, this unit will steer your vehicle slightly left. To avoid this, purchase a thru-shaft style stabilizer.\u003cbr\u003e\n\tIf you have a 2021 mid-year or newer model Wrangler or Gladiator, with the long square necked mounting bolt, you will need to use the older short square neck mounting bolt, Mopar part number MPR6510774AA\u003c\/p\u003e\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFrequently Asked Questions (FAQs)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eQ: What are the benefits of this stabilizer over stock?\u003c\/p\u003e\n\n\u003cp\u003eA: It can reduce steering wheel feedback, smooth out bump steer, and improve control, especially with larger tires or aftermarket suspension.\u003c\/p\u003e\n\n\u003cp\u003eQ: Is this stabilizer adjustable?\u003c\/p\u003e\n\n\u003cp\u003eA: No, this IFP model is non-adjustable. It’s valved by FOX for balanced, consistent performance on and off-road.\u003c\/p\u003e\n\n\u003cp\u003eQ: Will this help with death wobble?\u003c\/p\u003e\n\n\u003cp\u003eA: While it can reduce symptoms like wheel shimmy, a stabilizer is not a cure for death wobble. Worn or loose suspension and steering components must be inspected and addressed.\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572288770225,"sku":"985-24-173","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/vvzkfrojjptmngophgf1.jpg?v=1767943772"},{"product_id":"fox-2-0-ts-steering-stabilizer-1-1-2in-tie-rod-clamp","title":"FOX 2.0 TS STEERING STABILIZER, 1 1\/2IN TIE ROD CLAMP","description":"\u003cp\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback. The result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer. The Performance Series 2.0 Stabilizer TS includes application specific mounting hardware.\u003c\/p\u003e\n\n\n\t\u003cp\u003e2.0\" impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time\u003cbr\u003e\n\tClear-anodized for a durable finish\u003cbr\u003e\n\tExternal reservoir design separates shock oil from the high-pressure nitrogen\u003cbr\u003e\n\tBlack-anodized, CNC-machined 6061-T6 billet aluminum\u003cbr\u003e\n\tShaft-5\/8\" hard chrome plated heat treated alloy steel\u003cbr\u003e\n\tRedundant sealing pack system main seal, wiper seal, scraper seal\u003cbr\u003e\n\tJM92 Advanced Suspension Fluid for improved performance at variable temperatures\u003cbr\u003e\n\tQuiet nitrile rubber allows for increased suspension articulation\u003cbr\u003e\n\tDirect replacement for stock and aftermarket lifts kits\u003cbr\u003e\n\tTravel (in) 8.090\u003cbr\u003e\n\tCompressed (in) 15.030\u003cbr\u003e\n\tExtended (in) 23.120\u003cbr\u003e\n\tTop Mount Eyelet\u003c\/p\u003e\n\n\n\u003cp\u003eBottom Mount  Tie Rod Clamp\u003c\/p\u003e\n\n\u003cp\u003eFitment notes: Stock \u0026amp; 1-1\/2 in. Tie rod\u003c\/p\u003e","brand":"Fox Racing Shocks","offers":[{"title":"Default Title","offer_id":46572289949873,"sku":"985-02-128","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/jwj48oz4zc10kz6tksuz.jpg?v=1767943798"},{"product_id":"metalcloak-hd-dog-legged-tie-rod-wide","title":"METALCLOAK HD DOG-LEGGED TIE ROD, WIDE","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2 Weeks\u003c\/p\u003e\n\u003cp\u003eChromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler\/JT Gladiator is strength with style for your vulnerable steering system.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eTubular 1.625”OD .375” wall ID 4130 Chromoly CDS\u003cbr\u003e\n\tGold Zinc Chromate Finish\u003cbr\u003e\n\t1-Ton Forged Heat Treated Off Set Dog Leg Rod Ends\u003cbr\u003e\n\tRod End Design Controls Tie Rod Flop\u003cbr\u003e\n\tOE Taper Pin and lock nut for Exact Fitment\u003cbr\u003e\n\tSealed with Durable Rubber Grease Boots\u003cbr\u003e\n\tAdjustable While Installed\u003cbr\u003e\n\tIncludes HD Steering Stabilizer Bracket\u003c\/p\u003e\n\n\n\u003cp\u003eExclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1\" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.\u003c\/p\u003e\n\n\u003cp\u003eThe heavy duty 3\/16\" steel adjustable steering stabilizer mount bracket installs onto the tie-rod and re-positions the the stabilizer up and out of harms way; the mount is designed for aftermarket steering stabilizers.\u003c\/p\u003e\n\n\u003cp\u003eThe optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved \"M\" around the recessed bolt holes for a clean and custom look.\u003c\/p\u003e\n\n\u003cp\u003eTHIS IS FOR THE RUBICON | MAX-TOW | 4XE | HIGH ALTITUDE | MOJHAVE | 392 EDITIONS ONLY!\u003c\/p\u003e\n\n\u003cp\u003eNote: Minimum 2\" lift required.\u003c\/p\u003e\n\n\u003cp\u003eNote: Does NOT work with stock wheel backspacing.\u003c\/p\u003e\n\n\u003cp\u003eNote: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.\u003c\/p\u003e\n\n\u003cp\u003eNote: International models will use non-Rubicon version\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579556614321,"sku":"7622","price":464.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hazgwlq8nbt22wmvzlfl.jpg?v=1768083644"},{"product_id":"metalcloak-front-and-rear-durotrak-track-bars","title":"METALCLOAK FRONT AND REAR DUROTRAK TRACK BARS","description":"\u003cp\u003eJK Wrangler Jeep Front and Rear Durotrak Adjustable Track Bars is designed strong to meet the demands of on and off-road driving for your lifted Jeep.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eSolid 4130 1.25 Chromoly\u003cbr\u003e\n\tPatented 2 piece Durotrak bushings on both ends\u003cbr\u003e\n\tAdjustable for length\u003cbr\u003e\n\tPrecision Locking Nut\u003cbr\u003e\n\tClearance for Factory \u0026amp; Aftermarket Differentials\u003cbr\u003e\n\tForged End\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eThe Durotrak adjustable front and rear track bars for the Jeep JK Wrangler are built with Patented Durotrak 2 piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar. The bar is finished in gold zinc for the ultimate in durability against the elements.\u003c\/p\u003e\n\n\u003cp\u003eThe Durotrak bushing is housed in a forged adjustable end providing a 37% higher fatigue strength over inferior cast parts, this EXTRA rock bashing strength will hold up to whatever you throw at em.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e\n\n\u003cp\u003eNote: The Rear Track Bar is designed to work with the (7012) mounting bracket.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579556876465,"sku":"7242","price":638.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ga0d6abyp4h6l7vuqlkr.jpg?v=1768083653"},{"product_id":"metalcloak-rear-track-bar","title":"METALCLOAK REAR TRACK BAR","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eThe JL Rear Durotrak Heavy Duty Adjustable Track Bar for the Jeep Wrangler is designed strong to meet the demands of on and off-road driving for your lifted Jeep.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003eSolid 4130 1.25 Chromoly Rear\u003cbr\u003e\n\tPatented 2 Piece Durotrak Bushings On Both Ends\u003cbr\u003e\n\tAdjustable for length\u003cbr\u003e\n\tPrecision Locking Nut\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eThe Durotrak adjustable rear track bar for the Jeep Wrangler is built with the Patented Durotrak 2 piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar. The track bar is finished in gold zinc for the ultimate in durability against the elements.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed. Call us today for assistance (360) 340-0282\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557105841,"sku":"7401","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/xjsfraht6l6zdnkgrray.jpg?v=1768083666"},{"product_id":"metalcloak-rocksport-red-steering-stabilizer","title":"MetalCloak RockSport RED Steering Stabilizer","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Usually Ships in 2-3 Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak recommends a RockSport RED Steering Stabilizer for Jeep Wrangler with larger than stock tires. This is for only the stabilizer without any brackets.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eRockSport RED Specifically Tuned Steering Dampener\u003c\/p\u003e\n\n\n\u003cp\u003eThis features a 16mm chrome shaft for additional strength and stiffer valving in the over-sized body that keep vibrations and bump steer feedback to a minimum.\u003c\/p\u003e\n\n\u003cp\u003eThis system is simple to install and uses the existing factory holes in many cases for a bolt-on application.\u003c\/p\u003e\n\n\u003cp\u003eThis improved performance will assist in the overall ride and control of your Jeep.\u003c\/p\u003e\n\n\u003cp\u003eNote: This is a stand alone stabilizer and does not come with the Steering Stabilizer Axle Mounts or any hardware.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557171377,"sku":"7189","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/wseyyodbkbr1geew3war.jpg?v=1768083668"},{"product_id":"metalcloak-chromoly-front-track-bar","title":"METALCLOAK CHROMOLY FRONT TRACK BAR","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJL Wrangler Jeep \u0026amp; JT Gladiator Truck Front Durotrak Heavy Duty Adjustable Track Bar is designed strong to meet the demands of on and off-road driving for your lifted Jeep.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eSolid 4130 1.25 Chromoly\u003cbr\u003e\n\tPatented 2 Piece Durotrak Bushings On Both Ends\u003cbr\u003e\n\tAdjustable for Length\u003cbr\u003e\n\tPrecision Locking Nut\u003cbr\u003e\n\tClearance for Factory \u0026amp; Aftermarket Differentials\u003cbr\u003e\n\tForged End\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eThe Durotrak adjustable front track bar for the Jeep JL Wrangler and JT Gladiator is built with Patented Durotrak 2 piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar. The bar is finished in gold zinc for the ultimate in durability against the elements.\u003c\/p\u003e\n\n\u003cp\u003eThe Durotrak bushing is housed in a forged adjustable end providing a 37% higher fatigue strength over inferior cast parts, this EXTRA rock bashing strength will hold up to whatever you throw at em.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e\n\n\u003cp\u003eNote: The MetalCloak Front Durotrak Track Bar does not work at stock height.\u003c\/p\u003e\n\n\u003cp\u003eNote: The front track bar requires some trimming to the front track bar bracket.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed. Call us today for assistance (360) 340-0282\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557204145,"sku":"7616","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/bdp8radzgxkggcr72ssp.jpg?v=1768083669"},{"product_id":"metalcloak-durotrak-rear-track-bar","title":"METALCLOAK DUROTRAK REAR TRACK BAR","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping In 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eJT Gladiator Rear Durotrak Heavy Duty Adjustable Track Bar for the Jeep Truck is designed strong to meet the demands of on and off-road driving for your lifted Jeep.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eSolid 4130 1.25 Chromoly Rear\u003cbr\u003e\n\tPatented 2 Piece Durotrak Bushings On Both Ends\u003cbr\u003e\n\tAdjustable for length\u003cbr\u003e\n\tPrecision Locking Nut\u003cbr\u003e\n\tClearance Bend for Spare Tire\u003cbr\u003e\n\tGold Zinc Plated for Protection Against the Elements\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eThe Durotrak adjustable rear track bar for the Gladiator Jeep Truck is built with Patented Durotrak 2 piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar. The Rear Durotrak Track Bar has an engineered bend for clearance of a 37\" spare tire. The bar is finished in gold zinc for the ultimate in durability against the elements.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak “components” have been proven safe with the FMVSS certificate of safety configured with 37\" tires, full body armor and suspension lift.\u003c\/p\u003e\n\n\u003cp\u003eNote: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579557564593,"sku":"7619","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/dccouvg1n8ozresexmcd.jpg?v=1768083682"},{"product_id":"metalcloak-hd-dog-legged-tie-rod-narrow","title":"METALCLOAK HD DOG-LEGGED TIE ROD, NARROW","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2 Weeks\u003c\/p\u003e\n\u003cp\u003eChromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler\/JT Gladiator is strength with style for your vulnerable steering system.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\n\t\u003cp\u003eTubular 1.625”OD .375” wall ID 4130 Chromoly CDS\u003cbr\u003e\n\tGold Zinc Chromate Finish\u003cbr\u003e\n\t1-Ton Forged Heat Treated Off Set Dog Leg Rod Ends\u003cbr\u003e\n\tRod End Design Controls Tie Rod Flop\u003cbr\u003e\n\tOE Taper Pin and lock nut for Exact Fitment\u003cbr\u003e\n\tSealed with Durable Rubber Grease Boots\u003cbr\u003e\n\tAdjustable While Installed\u003cbr\u003e\n\tIncludes HD Steering Stabilizer Bracket\u003c\/p\u003e\n\n\n\u003cp\u003eExclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1\" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.\u003c\/p\u003e\n\n\u003cp\u003eThe heavy duty 3\/16\" steel adjustable steering stabilizer mount bracket installs onto the tie-rod and re-positions the the stabilizer up and out of harms way; the mount is designed for aftermarket steering stabilizers.\u003c\/p\u003e\n\n\u003cp\u003eThe optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved \"M\" around the recessed bolt holes for a clean and custom look.\u003c\/p\u003e\n\n\u003cp\u003eNote: Minimum 2\" lift required.\u003c\/p\u003e\n\n\u003cp\u003eNote: Does NOT work with stock wheel backspacing.\u003c\/p\u003e\n\n\u003cp\u003eNote: The RockSport steering stabilizer kit works with Left Hand Drive applications only.\u003cbr\u003e\nNote: Raised steering stabilizer requires at least 2” of bump stop to clear frame.\u003c\/p\u003e\n\n\u003cp\u003eNote: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579558678705,"sku":"7628","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/b0ugvuacjgolics8nnur.jpg?v=1768083710"},{"product_id":"metalcloak-baller-joints-hd-ball-joint-set","title":"MetalCloak Baller Joints HD Ball Joint Set","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003e\"BALLER\" Informal adjective: extremely good, impressive or excellent.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak's Baller Joints HD Ball Joints for the Jeep JL Wrangler and JT Gladiator are the ONLY Ball Joints that are comprised of top level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.\u003c\/p\u003e\n\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\n\n\t\u003cp\u003eLoad Bearing Upper and Lower Joints\u003cbr\u003e\n\tHardened Steel Races\u003cbr\u003e\n\tInduction Hardened Chromoly Spindle \u0026amp; Ball\u003cbr\u003e\n\tComposite Bushing for Radial Loads (Side to Side Movement)\u003cbr\u003e\n\tFully Sealed top and bottom O-ring AND Shaft Wiper Seals\u003cbr\u003e\n\tRecessed Zerk Fittings for Easy Service\/Grease\u003cbr\u003e\n\tAdjustable Pre-Load for Upper \u0026amp; Lower Joints\u003cbr\u003e\n\tMetalCloak Lock Ring Wrench Included\u003cbr\u003e\n\tIn-JEEP Rebuildable Upper \u0026amp; Lower\u003cbr\u003e\n\tGold Zinc, Clear Zinc \u0026amp; Anodized Black Finish\u003cbr\u003e\n\tMade in the USA\u003c\/p\u003e\n\n\n\u003cp\u003eMetalCloak uses the best features and combines them with top quality materials to create a ball joint replacement set that is unrivaled; this is the only ball joint that is Fully Sealed, Captured, Adjustable, On-Jeep rebuildable and made in the USA. Replace your worn ball joints with the best you can get.\u003c\/p\u003e\n\n\u003cp\u003eMetalCloak ball joints start with Chromoly Spindle \u0026amp; Ball with Induction Hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads; the material gives superior ability to absorb energy without fracture over inferior materials.\u003c\/p\u003e\n\n\u003cp\u003eComposite bearing sleeve slide over the spindle to handle shock loads and are the most resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and are long lasting.\u003c\/p\u003e\n\n\u003cp\u003eBoth upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with wiper seals on the shafts to keep contaminants out and grease in.\u003c\/p\u003e\n\n\u003cp\u003eAluminum lock nut and Thread on Top Cap capture the joints so there is no possibility of pulling the joints out of the C.\u003c\/p\u003e\n\n\u003cp\u003eAnodized black aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftsmanship and are sure to let others know you appreciate American Made quality and top notch performance. The ONLY joints that are Sealed, Captured, Adjustable, and On-Jeep rebuildable; the last ball joints you will ever need.\u003c\/p\u003e\n\n\u003cp\u003eLike other ball joints; only better.\u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579558940849,"sku":"1911","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/hfeoh4afrhrm7cxxtduj.jpg?v=1768083719"},{"product_id":"metalcloak-rocksprort-red-steering-stabilizer","title":"METALCLOAK ROCKSPRORT RED STEERING STABILIZER","description":"\u003cp class=\"mc-lead-time\"\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Currently Shipping in 2-3 Business Days\u003c\/p\u003e\n\u003cp\u003eMetalCloak's RockSport RED Steering Stabilizer Kit for the Jeep JK Wrangler provides the needed additional valving for your lifted Jeep with easy to install relocation brackets.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\n\t\u003cp\u003e3\/16\" Steel Plate Axle Side Stabilizer Relocation Bracket\u003cbr\u003e\n\tRockSport Specifically Tuned Steering Dampener\u003cbr\u003e\n\tAll Mounting Hardware\u003c\/p\u003e\n\n\n\u003cp\u003eThis system contains the MetalCloak Steering Stabilizer Axle Side Relocation Mount that places the steering stabilizer up and out of harms way and a specifically valved RockSport RED steering Dampener. This system is simple to install and uses the existing factory holes for a bolt-on application.\u003c\/p\u003e\n\n\u003cp\u003eThe RockSport RED steering stabilizer\/damper has increased compression and extension damping performance over the original equipment.\u003c\/p\u003e\n\n\u003cp\u003eThis improved performance will assist in the overall ride and control of your Jeep.\u003c\/p\u003e\n\n\u003cp\u003eNote: The RockSport RED steering stabilizer kit works with Left Hand Drive applications only.\u003c\/p\u003e\n\n\u003cp\u003eNote: Raised steering stabilizer requires at least 2” of bump stop to clear frame.\u003cbr\u003e\n \u003c\/p\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":46579559006385,"sku":"7133","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/cr4ef9vlixemo5ajs5fp.jpg?v=1768083722"},{"product_id":"d-jlbljnt-01-dv8-offroad-replacement-ball-joint-kit-dana-30-44","title":"DV8 Offroad Replacement Ball Joint Kit - Dana 30\/44","description":"\u003cp\u003eDV8 Offroad Jeep JL Replacement Ball Joint Kit is designed to survive oversized tires, harder steering loads, and the kind of heat and abuse that kills factory joints early. This kit includes both flush and standard grease zerks, making it compatible with stock and aftermarket axle shaft setups while giving you proper service access. Greaseable, serviceable boots help manage heat and contamination, extending service life in high-temperature, high-articulation environments like rock crawling, desert running, and heavy trail use.\u003c\/p\u003e\n\u003cp\u003eAt their core are SAE 4140 chromoly studs with rolled threads, delivering serious tensile strength and fatigue resistance where it matters most. The SAE 1045 ultra-strong knurled housing, finished in DV8’s signature green, locks securely into the knuckle to prevent movement under heavy load. Finished with a laser-etched DV8 logo, this ball joint kit fits Dana 30 and Dana 44 axles and is engineered to keep up with tough trail conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAE4140 Chromoly studs with rolled threads\u003c\/li\u003e\n\u003cli\u003eSAE1045 ultra strong knurled green housing\u003c\/li\u003e\n\u003cli\u003eFlush and standard grease zerk included for those who run aftermarket larger axles\u003c\/li\u003e\n\u003cli\u003eLaser-etched logo within the iconic DV8 green\u003c\/li\u003e\n\u003cli\u003eGreaseable and serviceable boots to help extend the life of the ball joints in high temp and use environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Type:\u003c\/strong\u003e Dana 30 \/ 44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreaseable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQty:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-Year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JL\/JT\u003c\/p\u003e","brand":"DV8","offers":[{"title":"Default Title","offer_id":48112673587377,"sku":"D-JLBLJNT-01","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/D-JLBLJNT-01_1.jpg?v=1793248148"},{"product_id":"rj-442100-101-currectlync-heavy-duty-steering-system","title":"RockJock Currectlync Heavy Duty Steering System","description":"\u003cp\u003eBig tires and aggressive usage of your Jeep JL Wrangler or JT Gladiator will cause the factory Jeep steering components to bend or break. For those who get their Jeeps out in the dirt, RockJock's Currectlync® Steering System is must-have! Being pro-active, so you don't get stranded in the wilderness is the smart thing to do for your family's safety\u003c\/p\u003e\n\u003cp\u003eRockJock's completely bolt-on Currectlync Steering System features an alloy steel 42mm (1.65 in.) diameter tie rod, 1.3 in. diameter solid forged, organically shaped, high articulation drag link, larger forged, greasable tie rod ends, premium jam nuts \u0026amp; adjuster and it's painted black, so it's ready for install right out of the box!\u003c\/p\u003e\n\u003cp\u003eThe new drag link’s organic shape ensures maximum up travel where your steering components are concerned. With this piece installed, you should also consider our RJ-107101-101 adjustable front bump stop kit so that you can fine tune your vehicle to truly achieve maximum up travel out of your set up.\u003cbr\u003e\nCurrectlync steering kit also includes RockJock's JL\/JT High-Mount Steering Stabilizer Relocation Bracket Kit for the passenger's side of the factory stabilizer shock, which moves the shock from the tie rod to the axle housing, as well as way up out of harm's way. A heavy duty stabilizer shock mounting kit for the opposite end of the factory stabilizer shock is also included that moves that shock mounting location from the axle housing to the tie rod tube.\u003c\/p\u003e\n\u003cp\u003eBoth the tie rod and drag link feature double adjusters so that they do not require removal from the vehicle for adjustment once installed. This unit is designed for use on stock height or lifted vehicles, but for those with big tires, these components are also compatible with ram assist steering.\u003cbr\u003e\nThis easy to install kit requires no modifications or machining to any part of the vehicle!\u003cbr\u003e\nSince you are this far along in your vehicle modifications, consider our High Steer Knuckle Kits for your application. These kits include this steering system!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e45mm (1.65 in.) Alloy Steel Tie Rod Assembly (w\/ Ends)\u003c\/li\u003e\n\u003cli\u003e1.3” Solid Forged, Organically Shaped Drag Link Assembly (w\/ Ends)\u003c\/li\u003e\n\u003cli\u003eSteering Stabilizer Shock High-Mount Relocation Bracket (Axle End of Shock)\u003c\/li\u003e\n\u003cli\u003eSteering Stabilizer Shock Bracket (Tie Rod End of Shock)\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware and step-by-step instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty greasable rod ends for increased strength and long service life\u003c\/li\u003e\n\u003cli\u003eDouble adjusters on both rods simplifies alignment (eliminates the need to remove ends of the rods to adjust, or stabilizer or ram to adjust tie rod)\u003c\/li\u003e\n\u003cli\u003eCompatible with ram assist steering\u003c\/li\u003e\n\u003cli\u003eDesigned for stock height or up to 6 in. lifted vehicles\u003c\/li\u003e\n\u003cli\u003eWorks with any size tire\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock knuckle applications, no increase in bump stop is required for the sake of the Drag Link, however, be mindful of the clearance of other components' clearance such as the relocated stabilizer shock. Always articulate test before calling it done!\u003c\/li\u003e\n\u003cli\u003eIn High Steer Knuckle applications: for RAM Assist or for Stabilizer Shock, we recommend the use of our Adjustable Bump Stop Kit, which will allow you to squeeze the absolute most up travel out of your set up.\u003c\/li\u003e\n\u003cli\u003eWhen using ram assist, be mindful of tube size when purchasing ram assist brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnds Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Lift:\u003c\/strong\u003e 0-6in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1.654in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JT\/JL\u003c\/p\u003e","brand":"RockJock","offers":[{"title":"Default Title","offer_id":48112677814449,"sku":"RJ-442100-101","price":854.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RJ-442100-101_1.jpg?v=1793248149"},{"product_id":"rs5405-rancho-performance-rs5000-steering-damper","title":"Rancho Performance RS5000 Steering Damper","description":"\u003cp\u003eThe Rancho Performance RS5000 Steering Damper has been designed to enhance the steering performance in your vehicle. These steering dampeners can be utilized for off-road driving, towing, as well as for street use. \u003cbr\u003e\nThe RS5000 Steering stabilizers reduce wheel vibration, bump steer, and will work well for vehicles with larger tires. These are built from the same foundation as the RS5000 shock absorber, bringing you the same performance dynamic to your steering system. \u003c\/p\u003e\n\u003cp\u003eNOTE: This stabilizer is designed to be used in a dual stabilizer setup in conjunction with Rancho steering stabilizer mount Part# RS64101.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed Length:\u003c\/strong\u003e 12.78in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamper Type:\u003c\/strong\u003e Monotube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Length:\u003c\/strong\u003e 21.70in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Rancho Performance","offers":[{"title":"Default Title","offer_id":48112679125169,"sku":"RS5405","price":106.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RS5405_1.jpg?v=1793248150"}],"url":"https:\/\/wp4x4.com\/collections\/death-wobble-fix-parts.oembed?page=5","provider":"WP4x4","version":"1.0","type":"link"}