{"title":"2007-2018 Jeep Wrangler JK Lift Kits","description":"\u003cp\u003eLift kits for the 2007-2018 Jeep Wrangler JK and JK Unlimited, from mild coil lifts to long arm suspension systems. Check each product page for exact fitment and what's included.\u003c\/p\u003e","products":[{"product_id":"rock-krawler-2-5in-x-factor-system-lift-kit-jk-4dr","title":"Rock Krawler 2.5in X-Factor System Lift Kit JK 4dr","description":"\u003cp\u003e\u003cstrong\u003eSystem Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli\u003eComplete Bolt in System\u003c\/li\u003e\n\u003cli\u003eExcellent Highway Ride and Handling\u003c\/li\u003e\n\u003cli\u003eGreatly Improved Off-Road Ability\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Lower Control Arms\u003cspan\u003e \u003c\/span\u003eFront and Rear\u003c\/li\u003e\n\u003cli\u003eIn Vehicle Adjustable Front Upper Arms\u003c\/li\u003e\n\u003cli\u003eTriple Rate Coil Springs\u003c\/li\u003e\n\u003cli\u003ePRO Front Sway Bar Disconnects\/Extended Links\u003c\/li\u003e\n\u003cli\u003ePRO Rear Extended Sway Bar Links\u003c\/li\u003e\n\u003cli\u003eRepositions the Rear Axle Back up to 1\" Over Stock\u003c\/li\u003e\n\u003cli\u003e33\" or 35\" Tires\u003cspan\u003e \u003c\/span\u003e(OEM Fenders)\u003c\/li\u003e\n\u003cli\u003e37\" Tires\u003cspan\u003e \u003c\/span\u003e(Flat Fenders)\u003c\/li\u003e\n\u003cli\u003eAbuse Proof Lifetime Warranty on All Hard Parts\u003c\/li\u003e\n\u003cli\u003eUpgradeable to any other Rock Krawler System\u003c\/li\u003e\n\u003cp\u003e*includes all Hardware and detailed Instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*All lift heights based on Rubicon models for standard style build (i.e., front bumper and winch, rear bumper and full-size spare).\u003c\/p\u003e\n\u003cp\u003e*If building with a spare delete, we recommend dropping 1” in coil lift height for the rear.\u003c\/p\u003e\n\u003cp\u003e*If building an overland or heavily upfitted build in the back, we recommend upsizing 1” in coil lift height for the rear.\u003c\/p\u003e\n\u003cp\u003e*We typically recommend 4.5\" of back spacing on rims for 33\" and 35\" tall tires.\u003c\/p\u003e\n\u003cp\u003e*We typically recommend 3.5\" of back spacing on rims for 37\" tall tires.\u003c\/p\u003e\n\u003cp\u003e*For 2012 and newer models an aftermarket front driveshaft with 2\" O.D. steel tubing is recommended, but not required.\u003c\/p\u003e\n\u003cp\u003e*The X Factor System allows the rear axle to be pushed back up to 1\" over stock which perfectly centers the rear axle assembly under typical aftermarket flat fenders. It also allows for larger tires without contacting the rock sliders or rear pinch seam.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rock Krawler","offers":[{"title":"Default Title","offer_id":43145095020721,"sku":"JK25XF-4","price":3258.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/g23vb6sp66fru59vgtb6.jpg?v=1701977252"},{"product_id":"rock-krawler-2-5-x-factor-stage-1-lift-kit-jk-4dr","title":"Rock Krawler 2.5in X-Factor Stage 1 Lift Kit JK 4dr","description":"\u003cp\u003e\u003cstrong\u003eSystem Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli\u003eComplete Bolt in System\u003c\/li\u003e\n\u003cli\u003eExcellent Highway Ride and Handling\u003c\/li\u003e\n\u003cli\u003eGreatly Improved Off-Road Performance\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Lower Control Arms Front and Rear\u003c\/li\u003e\n\u003cli\u003eIn Vehicle Adjustable Front Upper Arms\u003c\/li\u003e\n\u003cli\u003eTriple Rate Coil Springs\u003c\/li\u003e\n\u003cli\u003ePRO Front Sway Bar Disconnects\/Extended Links\u003c\/li\u003e\n\u003cli\u003ePRO Rear Extended Sway Bar Links\u003c\/li\u003e\n\u003cli\u003e2.25 RRD Shocks\u003c\/li\u003e\n\u003cli\u003eRepositions the Rear Axle Back up to 1\" Over Stock\u003c\/li\u003e\n\u003cli\u003e33\" or 35\" Tires (OEM Fenders)\u003c\/li\u003e\n\u003cli\u003e37\" Tires (Flat Fenders)\u003c\/li\u003e\n\u003cli\u003eAbuse Proof Lifetime Warranty on All Hard Parts\u003c\/li\u003e\n\u003cli\u003eUpgradeable to any other Rock Krawler System\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e- We typically recommend 4.5\" of back spacing on rims for 33\" and 35\" tall tires.\u003cbr\u003e- We typically recommend 3.5\" of back spacing on rims for 37\" tall tires.\u003cbr\u003e- For 2012 and newer models an aftermarket front driveshaft with 2\" O.D. steel tubing is recommended, but not required.\u003cbr\u003e- The X Factor System allows the rear axle to be pushed back up to 1\" over stock which perfectly centers the rear axle assembly under typical aftermarket flat fenders. It also allows for larger tires without contacting the rock sliders or rear pinch seam.\u003c\/p\u003e","brand":"Rock Krawler","offers":[{"title":"Default Title","offer_id":43145096069297,"sku":"JK25XF-4S1","price":4551.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rjjmar0uold0mnybc1kc.jpg?v=1701977406"},{"product_id":"rock-krawler-2-5in-x-factor-stage-1-lift-kit-jk-2dr","title":"Rock Krawler 2.5in X-Factor Stage 1 Lift Kit JK 2dr","description":"System Benefits:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eComplete Bolt in System\u003cbr data-mce-fragment=\"1\"\u003eExcellent Highway Ride and Handling\u003cbr data-mce-fragment=\"1\"\u003eGreatly Improved Off-Road Performance\u003cbr data-mce-fragment=\"1\"\u003eHigh Clearance Lower Control Arms Front and Rear\u003cbr data-mce-fragment=\"1\"\u003eIn Vehicle Adjustable Front Upper Arms\u003cbr data-mce-fragment=\"1\"\u003eTriple Rate Coil Springs\u003cbr data-mce-fragment=\"1\"\u003ePRO Front Sway Bar Disconnects\/Extended Links\u003cbr data-mce-fragment=\"1\"\u003ePRO Rear Extended Sway Bar Links\u003cbr data-mce-fragment=\"1\"\u003e2.25 RRD Shocks\u003cbr data-mce-fragment=\"1\"\u003eRepositions the Rear Axle Back up to 1\" Over Stock\u003cbr data-mce-fragment=\"1\"\u003e33\" or 35\" Tires (OEM Fenders)\u003cbr data-mce-fragment=\"1\"\u003e37\" Tires (Flat Fenders)\u003cbr data-mce-fragment=\"1\"\u003eAbuse Proof Lifetime Warranty on All Hard Parts\u003cbr data-mce-fragment=\"1\"\u003eUpgradeable to any other Rock Krawler System\u003cbr data-mce-fragment=\"1\"\u003e- We typically recommend 4.5\" of back spacing on rims for 33\" and 35\" tall tires.\u003cbr data-mce-fragment=\"1\"\u003e- We typically recommend 3.5\" of back spacing on rims for 37\" tall tires.\u003cbr data-mce-fragment=\"1\"\u003e- For 2012 and newer models an aftermarket front driveshaft with 2\" O.D. steel tubing is recommended, but not required.\u003cbr data-mce-fragment=\"1\"\u003e- The X Factor System allows the rear axle to be pushed back up to 1\" over stock which perfectly centers the rear axle assembly under typical aftermarket flat fenders. It also allows for larger tires without contacting the rock sliders or rear pinch seam.","brand":"Rock Krawler","offers":[{"title":"Default Title","offer_id":43145098854577,"sku":"JK25XF-2S1","price":4551.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/tl0acjple1xucvl0jojq.jpg?v=1701977556"},{"product_id":"rock-krawler-2-5-x-factor-stage-1-lift-kit-jk-4dr-1","title":"Rock Krawler 2.5in X-Factor Stage 1 Lift Kit JK 4dr","description":"\u003cp\u003e\u003cstrong\u003eSystem Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli\u003eComplete Bolt in System\u003c\/li\u003e\n\u003cli\u003eExcellent Highway Ride and Handling\u003c\/li\u003e\n\u003cli\u003eGreatly Improved Off-Road Performance\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Lower Control Arms Front and Rear\u003c\/li\u003e\n\u003cli\u003eIn Vehicle Adjustable Front Upper Arms\u003c\/li\u003e\n\u003cli\u003eTriple Rate Coil Springs\u003c\/li\u003e\n\u003cli\u003ePRO Front Sway Bar Disconnects\/Extended Links\u003c\/li\u003e\n\u003cli\u003ePRO Rear Extended Sway Bar Links\u003c\/li\u003e\n\u003cli\u003e2.25 RRD Shocks\u003c\/li\u003e\n\u003cli\u003eRepositions the Rear Axle Back up to 1\" Over Stock\u003c\/li\u003e\n\u003cli\u003e33\" or 35\" Tires (OEM Fenders)\u003c\/li\u003e\n\u003cli\u003e37\" Tires (Flat Fenders)\u003c\/li\u003e\n\u003cli\u003eAbuse Proof Lifetime Warranty on All Hard Parts\u003c\/li\u003e\n\u003cli\u003eUpgradeable to any other Rock Krawler System\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e- We typically recommend 4.5\" of back spacing on rims for 33\" and 35\" tall tires.\u003cbr\u003e- We typically recommend 3.5\" of back spacing on rims for 37\" tall tires.\u003cbr\u003e- For 2012 and newer models an aftermarket front driveshaft with 2\" O.D. steel tubing is recommended, but not required.\u003cbr\u003e- The X Factor System allows the rear axle to be pushed back up to 1\" over stock which perfectly centers the rear axle assembly under typical aftermarket flat fenders. It also allows for larger tires without contacting the rock sliders or rear pinch seam.\u003c\/p\u003e","brand":"Rock Krawler","offers":[{"title":"Default Title","offer_id":43155493781681,"sku":"JK25XF-4S1","price":4551.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/rjjmar0uold0mnybc1kc_0c50ef03-9675-4f80-9527-602ef2838985.jpg?v=1702408737"},{"product_id":"202b-evo-manufacturing-high-clearance-pro-suspension-coilover-kit-black","title":"EVO Manufacturing High Clearance Pro Suspension Coilover Kit, Black","description":"\u003cp\u003eThe EVO MFG Front and Rear LCG Bolt-On Coilover kits come complete with all necessary parts to easily convert the JK from the limited coil and shock system to a far superior performing coilover system. 12”’s of usable wheel travel, custom built brackets for the lowest center of gravity, EVO’s legendary SPEC valving and spring rates specifically dialed in for the JK to yield excellent handling. The EVO MFG LCG Bolt-On Coilover system proves to set the bar, for ease of install, price and performance. LCG 3”-5” recommended lift height, fully adjustable minimal drilling\/cutting required, fully bolt-on Hi Clearance design. Retains all factory rear exhaust system as well as factory front and rear swaybars.\u003c\/p\u003e\n\u003cp\u003eThe EVO MFG Draglink Flip Kit raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling\/ steering response of the vehicle on and off road. The EVO MFG Drag Link Flip Kit features an improved steering stabilizer mounting location to get it up and out of harm’s way above the tie rod. \u003c\/p\u003e\n\u003cp\u003e The EVO MFG High Clearance PRO Long Arm Upgrade kit features the EVO MFG Adjustors, full on car adjustability of control arm length, proven Currie Johnny Joints are used on both ends of each arm, rebuildable, greaseable, and isolated construction for decreased transmission of road vibrations, the ability to retain the factory high clearance transmission cross-member, (welding required)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: *Image shows Blue Coilovers, this product includes Black Coilovers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance Fenders Recommended.  Suspension system fits all year and model Jeep Wrangler JK\/JKUs\u003c\/li\u003e\n\u003cli\u003e2Door JK: Front (or exhuast spacer kit) and rear aftermarket driveshaft required.  (not included)\u003c\/li\u003e\n\u003cli\u003e4Door JKU: Front aftermarket driveshaft or exhaust spacer required, rear driveshaft recommended. (not included)\u003c\/li\u003e\n\u003cli\u003eRecommended wheel backspacing 3.75” or less (smaller backspacing #).  Exhaust modifactions required on 2010+ JK\/JKUs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48113556717745,"sku":"202B","price":8948.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/duawble8zdagclgdwa7n.jpg?v=1793255438"},{"product_id":"1335000-teraflex-alpine-rt-coilover-complete-system","title":"Teraflex Alpine RT Coilover Complete System","description":"\u003cp\u003eOur Falcon Shock equipped coilover suspension system is designed to work with 70” Tera60 or other axles featuring the same 3.25” axle tube diameter and width. The Falcon Coilover Shocks have been developed to meet the distinct demands of the JK Wrangler. While performance is always a priority, who wants to endure the annoyance of a squeaking, popping, or creaking suspension?\u003cbr\u003e\n\u003cbr\u003e\nThis system has been engineered to address the common shortcomings of coilover shocks prevalent in today's noisy and generically tuned coilover market. These noises are so common in traditional coilover shocks that they've been given names! These include \"Spring Twang\", which occurs when springs are compressed and suddenly shift on the coil divider\/sliders; \"Zipping\", which refers to the slider noisily moving up and down a threaded shock body; and \"Slider Slap\", which happens when the slider hits the crossover rings, and the heavier spring engages. Additionally, there's the constant \"clicking and clacking\" of an internal bypass shock, and the ever-familiar shock mount bushing \"Squeak\". Clearly, not the kind of symphony you want to hear.\u003cbr\u003e\n\u003cbr\u003e\nFalcon coilover shocks, in contrast, are meticulously designed for utterly silent operation. Sealed Gimble Bearing shock mounts ensure solid and noiseless control when combined with the TeraFlex coilover mount solution\u003cbr\u003e\n\u003cbr\u003e\nThe sleek, hard-anodized shock body, featured on all Falcon Shocks, serves as the perfect bearing surface for the new sealed and lubricated spring sliders. These sliders also boast roller-bearing spring seats, guaranteeing noiseless spring movement during compression and extension, even during spring twisting.\u003cbr\u003e\n\u003cbr\u003e\nThis unique design allows for full suspension cycling without any component contact, but the real fun begins when you take your TeraFlex-equipped coilover suspension out for a drive and experience the stable highway ride and the unbelievable suspension travel while off-roading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRace-inspired performance for increased vehicle stability\u003c\/li\u003e\n\u003cli\u003eImproved dynamic roll control and low-speed damping\u003c\/li\u003e\n\u003cli\u003eDramatic improvement in on-road comfort and off-road performance\u003c\/li\u003e\n\u003cli\u003eOptimized fitment for unobstructed suspension travel and articulation\u003c\/li\u003e\n\u003cli\u003e12” stroke Front, and 13” Rear\u003c\/li\u003e\n\u003cli\u003eAdjustable crossover for True Dual-Rate\u003c\/li\u003e\n\u003cli\u003e4.5” lift, +\/- 1.25” adjustability using quick adjust snap rings\u003c\/li\u003e\n\u003cli\u003eCoated, Booted and Sealed, oversized Gimbal Lock Bearings mount and maintain shock orientation\u003c\/li\u003e\n\u003cli\u003eJK specific coils, and shock tuning\u003c\/li\u003e\n\u003cli\u003eFalcon 3.3 series Quick Adjust tuning\u003c\/li\u003e\n\u003cli\u003eDesigned for standard 3.0” coils\u003c\/li\u003e\n\u003cli\u003eRefreshed Speed Bumps silently provide 4X the bottoming resistance\u003c\/li\u003e\n\u003cli\u003eRT4 Long Arm Suspension for control, Flex, and stability\u003c\/li\u003e\n\u003cli\u003eWeld on ¼” laser cut reinforced Coilover brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eREQUIRES\u003c\/strong\u003e wheels w\/ 4.75” backspacing or less – or 1.75” Wheel Offset Adapter Pair (# 1057000 x 2) for stock wheels – \u003cstrong\u003eNOT INCLUDED.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Front driveline “double cardon” upgrade due to increased travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREQUIRES\u003c\/strong\u003e cutting\/removal of factory control arm bracketry and spring buckets to install\u003c\/li\u003e\n\u003cli\u003eInner wheel well and frame trimming required\u003c\/li\u003e\n\u003cli\u003eAll necessary frame bracing, wheel well boxing and carpet are included\u003c\/li\u003e\n\u003cli\u003eAlignment \u003cstrong\u003eREQUIRED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis is a weld on suspension system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires 70” wide axles with 3.25” axle tube diameter\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression Adjustment:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Bump Stops:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt \/ Weld On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front and Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr\u003c\/p\u003e","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":48113900093617,"sku":"1335000","price":11659.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ciqdxu9if37quxyc7dtz.jpg?v=1793259470"},{"product_id":"1335300-teraflex-rear-alpine-rt-coilover-lift-kit","title":"Teraflex Rear Alpine RT Coilover Lift Kit","description":"\u003cp\u003eOur Falcon Shock equipped coilover suspension system is designed to work with 70” Tera60 or other axles featuring the same 3.25” axle tube diameter and width. The Falcon Coilover Shocks have been developed to meet the distinct demands of the JK Wrangler. While performance is always a priority, who wants to endure the annoyance of a squeaking, popping, or creaking suspension?\u003cbr\u003e\n\u003cbr\u003e\nThis system has been engineered to address the common shortcomings of coilover shocks prevalent in today's noisy and generically tuned coilover market. These noises are so common in traditional coilover shocks that they've been given names! These include \"Spring Twang\", which occurs when springs are compressed and suddenly shift on the coil divider\/sliders; \"Zipping\", which refers to the slider noisily moving up and down a threaded shock body; and \"Slider Slap\", which happens when the slider hits the crossover rings, and the heavier spring engages. Additionally, there's the constant \"clicking and clacking\" of an internal bypass shock, and the ever-familiar shock mount bushing \"Squeak\". Clearly, not the kind of symphony you want to hear.\u003cbr\u003e\n\u003cbr\u003e\nFalcon coilover shocks, in contrast, are meticulously designed for utterly silent operation. Sealed Gimble Bearing shock mounts ensure solid and noiseless control when combined with the TeraFlex coilover mount solution\u003cbr\u003e\n\u003cbr\u003e\nThe sleek, hard-anodized shock body, featured on all Falcon Shocks, serves as the perfect bearing surface for the new sealed and lubricated spring sliders. These sliders also boast roller-bearing spring seats, guaranteeing noiseless spring movement during compression and extension, even during spring twisting.\u003cbr\u003e\n\u003cbr\u003e\nThis unique design allows for full suspension cycling without any component contact, but the real fun begins when you take your TeraFlex-equipped coilover suspension out for a drive and experience the stable highway ride and the unbelievable suspension travel while off-roading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRace-inspired performance for increased vehicle stability\u003c\/li\u003e\n\u003cli\u003eImproved dynamic roll control and low-speed damping\u003c\/li\u003e\n\u003cli\u003eDramatic improvement in on-road comfort and off-road performance\u003c\/li\u003e\n\u003cli\u003eOptimized fitment for unobstructed suspension travel and articulation\u003c\/li\u003e\n\u003cli\u003e12” stroke Front, and 13” Rear\u003c\/li\u003e\n\u003cli\u003eAdjustable crossover for True Dual-Rate\u003c\/li\u003e\n\u003cli\u003e4.5” lift, +\/- 1.25” adjustability using quick adjust snap rings\u003c\/li\u003e\n\u003cli\u003eCoated, Booted and Sealed, oversized Gimbal Lock Bearings mount and maintain shock orientation\u003c\/li\u003e\n\u003cli\u003eJK specific coils, and shock tuning\u003c\/li\u003e\n\u003cli\u003eFalcon 3.3 series Quick Adjust tuning\u003c\/li\u003e\n\u003cli\u003eDesigned for standard 3.0” coils\u003c\/li\u003e\n\u003cli\u003eRefreshed Speed Bumps silently provide 4X the bottoming resistance\u003c\/li\u003e\n\u003cli\u003eRT4 Long Arm Suspension for control, Flex, and stability\u003c\/li\u003e\n\u003cli\u003eWeld on ¼” laser cut reinforced Coilover brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eREQUIRES\u003c\/strong\u003e wheels w\/ 4.75” backspacing or less – or 1.75” Wheel Offset Adapter Pair (# 1057000 x 2) for stock wheels – \u003cstrong\u003eNOT INCLUDED.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Front driveline “double cardon” upgrade due to increased travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREQUIRES\u003c\/strong\u003e cutting\/removal of factory control arm bracketry and spring buckets to install\u003c\/li\u003e\n\u003cli\u003eInner wheel well and frame trimming required\u003c\/li\u003e\n\u003cli\u003eAll necessary frame bracing, wheel well boxing and carpet are included\u003c\/li\u003e\n\u003cli\u003eAlignment \u003cstrong\u003eREQUIRED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis is a weld on suspension system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires 70” wide axles with 3.25” axle tube diameter\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression Adjustment:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Bump Stops:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt \/ Weld On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr\u003c\/p\u003e","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":48113900126385,"sku":"1335300","price":4124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/gekyw4xb4oddmfwzgwie.jpg?v=1793259470"},{"product_id":"1335200-teraflex-front-alpine-rt-coilover-lift-kit","title":"Teraflex Front Alpine RT Coilover Lift Kit","description":"\u003cp\u003eOur Falcon Shock equipped coilover suspension system is designed to work with 70” Tera60 or other axles featuring the same 3.25” axle tube diameter and width. The Falcon Coilover Shocks have been developed to meet the distinct demands of the JK Wrangler. While performance is always a priority, who wants to endure the annoyance of a squeaking, popping, or creaking suspension?\u003cbr\u003e\n\u003cbr\u003e\nThis system has been engineered to address the common shortcomings of coilover shocks prevalent in today's noisy and generically tuned coilover market. These noises are so common in traditional coilover shocks that they've been given names! These include \"Spring Twang\", which occurs when springs are compressed and suddenly shift on the coil divider\/sliders; \"Zipping\", which refers to the slider noisily moving up and down a threaded shock body; and \"Slider Slap\", which happens when the slider hits the crossover rings, and the heavier spring engages. Additionally, there's the constant \"clicking and clacking\" of an internal bypass shock, and the ever-familiar shock mount bushing \"Squeak\". Clearly, not the kind of symphony you want to hear.\u003cbr\u003e\n\u003cbr\u003e\nFalcon coilover shocks, in contrast, are meticulously designed for utterly silent operation. Sealed Gimble Bearing shock mounts ensure solid and noiseless control when combined with the TeraFlex coilover mount solution\u003cbr\u003e\n\u003cbr\u003e\nThe sleek, hard-anodized shock body, featured on all Falcon Shocks, serves as the perfect bearing surface for the new sealed and lubricated spring sliders. These sliders also boast roller-bearing spring seats, guaranteeing noiseless spring movement during compression and extension, even during spring twisting.\u003cbr\u003e\n\u003cbr\u003e\nThis unique design allows for full suspension cycling without any component contact, but the real fun begins when you take your TeraFlex-equipped coilover suspension out for a drive and experience the stable highway ride and the unbelievable suspension travel while off-roading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRace-inspired performance for increased vehicle stability\u003c\/li\u003e\n\u003cli\u003eImproved dynamic roll control and low-speed damping\u003c\/li\u003e\n\u003cli\u003eDramatic improvement in on-road comfort and off-road performance\u003c\/li\u003e\n\u003cli\u003eOptimized fitment for unobstructed suspension travel and articulation\u003c\/li\u003e\n\u003cli\u003e12” stroke Front, and 13” Rear\u003c\/li\u003e\n\u003cli\u003eAdjustable crossover for True Dual-Rate\u003c\/li\u003e\n\u003cli\u003e4.5” lift, +\/- 1.25” adjustability using quick adjust snap rings\u003c\/li\u003e\n\u003cli\u003eCoated, Booted and Sealed, oversized Gimbal Lock Bearings mount and maintain shock orientation\u003c\/li\u003e\n\u003cli\u003eJK specific coils, and shock tuning\u003c\/li\u003e\n\u003cli\u003eFalcon 3.3 series Quick Adjust tuning\u003c\/li\u003e\n\u003cli\u003eDesigned for standard 3.0” coils\u003c\/li\u003e\n\u003cli\u003eRefreshed Speed Bumps silently provide 4X the bottoming resistance\u003c\/li\u003e\n\u003cli\u003eRT4 Long Arm Suspension for control, Flex, and stability\u003c\/li\u003e\n\u003cli\u003eWeld on ¼” laser cut reinforced Coilover brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eREQUIRES\u003c\/strong\u003e wheels w\/ 4.75” backspacing or less – or 1.75” Wheel Offset Adapter Pair (# 1057000 x 2) for stock wheels – \u003cstrong\u003eNOT INCLUDED.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Front driveline “double cardon” upgrade due to increased travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREQUIRES\u003c\/strong\u003e cutting\/removal of factory control arm bracketry and spring buckets to install\u003c\/li\u003e\n\u003cli\u003eInner wheel well and frame trimming required\u003c\/li\u003e\n\u003cli\u003eAll necessary frame bracing, wheel well boxing and carpet are included\u003c\/li\u003e\n\u003cli\u003eAlignment \u003cstrong\u003eREQUIRED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis is a weld on suspension system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires 70” wide axles with 3.25” axle tube diameter\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression Adjustment:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Bump Stops:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt \/ Weld On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTY:\u003c\/strong\u003e 1 Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr\u003c\/p\u003e","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":48113900224689,"sku":"1335200","price":4124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/e3yoy7jkt5akzdrxdb0v.jpg?v=1793259471"},{"product_id":"1251000-teraflex-lift-kit-w-shocks-2-5in-lift","title":"Teraflex 2.5in Coil Spring Base Lift Kit \u0026 9550 VSS Twin-Tube Shocks","description":"\u003cp\u003eIncrease Off-Road Capability\u003c\/p\u003e\n\u003cp\u003eYou should be able to go wherever your heart tells you to, but sometimes the height of your ride can hold you back. Make that barrier a thing of the past with the Teraflex 2.5-in Lift Kit w\/ Shocks. Created with care and incredible attention to detail, this kit will help get you to the places that you want to go. This kit includes shock absorbers and everything else that you need to get your ride looking good and ready for any on or off-road outing. Reliable and long-lasting, this is the kind of product you want for your 4x4. This kit doesn't change the way your Jeep operates, it just improves your experience.\u003c\/p\u003e\n\u003cp\u003eTeraflex 2.5-in Coil Spring Base Lift Kit designed specifically for Jeep Wrangler JK 4dr includes basic components to fit tires up to 35-in and achieve increased ground clearance without compromising handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-in lift coil springs\u003c\/li\u003e\n\u003cli\u003eBumpstop extensions\u003c\/li\u003e\n\u003cli\u003eRear swaybar links\u003c\/li\u003e\n\u003cli\u003e9550 VSS shock absorbers\u003c\/li\u003e\n\u003cli\u003eRear trackbar\u003c\/li\u003e\n\u003cli\u003eAxle brackets\u003c\/li\u003e\n\u003cli\u003eNecessary hardware you may need \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended components: – NOT INCLUDED: Sport Control Arm Kit (4-Arm: # 1254000 or 8-Arm: # 1258000), or adjustable 8-Arm Short Control Arm Kit (Alpine: # 1415610 or Alpine IR: # 1415611), or adjustable 8-Arm Long Control Arm \u0026amp; Bracket Kit (Alpine: # 1315010 or Alpine IR: # 1315011), and\/or HD Forged Adjustable Track Bar(s) (Front: # 1753418 and\/or Rear: # 1754418).\u003c\/li\u003e\n\u003cli\u003eRequires aftermarket wheels w\/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels – NOT INCLUDED.\u003c\/li\u003e\n\u003cli\u003e2012–2018 JK Wrangler\/Unlimited models require Exhaust Spacers (# 2610000) or other exhaust modification for proper driveshaft clearance if front extended shock length is greater than 24.5”.\u003c\/li\u003e\n\u003cli\u003eCaster correction is recommended, but NOT required. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4DR\u003c\/p\u003e","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":48115688997041,"sku":"1251000","price":1065.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/TER1251000.jpg?v=1793278198"},{"product_id":"230-35s2k-evo-manufacturing-3in-enforcer-stage-2-lift-kit-w-draglink-flip-kit-and-king-shocks","title":"EVO Manufacturing 3in Enforcer Stage 2 Lift Kit w\/ Draglink Flip Kit and King Shocks","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration.  Fatigue to occupants, Reliability, Functionality, Affordability.  For the challenge we deemed the EVO MFG ENFORCER Suspension package. We Smoothed and Balanced the Overall Ride Quality with EVO MFG Plush Coils Front Adjustable Lower Control Arms to correct caster angle with EVO MFG on Vehicle Adjusters \/ Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\/ Stage3 includes all 8 Adjustable Control arms for full suspension tuning.  \u003c\/p\u003e\n\u003cp\u003eRear Roll Center correction trackbar bracket  Stainless Steel Brakelines  All necessary hardware included  All stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more.  Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK.  Roll center is greatly improved giving better handling of the vehicle on and off road   Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket   Comes complete with new forged draglink   All bracketry made from 3\/16” thick laser cut and CNC bent sheet metal   All bracketry is finished in a corrosion resistant Black Powdercoat   Integrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod. Drilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115704594609,"sku":"230-35S2K","price":5223.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/ddlv7ks5bdauohzqcpg9.jpg?v=1793278293"},{"product_id":"230-35s1k-evo-manufacturing-3in-enforcer-stage-1-lift-kit-w-draglink-flip-kit-and-king-2-5-shocks","title":"EVO Manufacturing 3in Enforcer Stage 1 Lift Kit w\/ Draglink Flip Kit and King 2.5 Shocks","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration.  Fatigue to occupants, Reliability, Functionality, Affordability.  For the challenge we deemed the EVO MFG ENFORCER Suspension package. We Smoothed and Balanced the Overall Ride Quality with EVO MFG Plush Coils Front Adjustable Lower Control Arms to correct caster angle with EVO MFG on Vehicle Adjusters \/ Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\/ Stage3 includes all 8 Adjustable Control arms for full suspension tuning.  \u003c\/p\u003e\n\u003cp\u003eRear Roll Center correction trackbar bracket  Stainless Steel Brakelines  All necessary hardware included  All stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more.  Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK.  Roll center is greatly improved giving better handling of the vehicle on and off road   Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket   Comes complete with new forged draglink   All bracketry made from 3\/16” thick laser cut and CNC bent sheet metal   All bracketry is finished in a corrosion resistant Black Powdercoat   Integrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod. Drilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115704758449,"sku":"230-35S1K","price":4688.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/s7cwyzqnw1onwcbsfdhm.jpg?v=1793278293"},{"product_id":"67330-rough-country-4in-x-series-suspension-lift-kit-w-n3-shocks","title":"Rough Country 4in X-series Suspension Lift Kit w\/ N3 Shocks","description":"\u003cp\u003eGive your Jeep a total transformation with Rough Country’s 4in X-Series Suspension Lift. This all-inclusive kit comes with everything you need to give your vehicle aggressive good looks and improved off-road performance!\u003cbr\u003e\n\u003cbr\u003e\nThis kit features a set of front and rear upper and lower adjustable control arms with a high-clearance design, allowing you to dial in the exact ride you desire! Each kit also comes with lifted coil springs and coil correction plates, providing lift height and impeccable vibration dampening on any terrain.\u003cbr\u003e\n\u003cbr\u003e\nFor those who are serious about flexing, crawling, and pushing your Jeep to the limits, this kit features an upgraded Forged Adjustable Track Bar. Made of forged steel, this 16lb Track Bar boast a beefy construction that will dwarf stock equipment. Easy to install and fully adjustable on the vehicle.\u003cbr\u003e\n\u003cbr\u003e\nBest of all, this kit features Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eLevels the front with the rear of the vehicle\u003c\/li\u003e\n\u003cli\u003eFront adjustable track bar is made of forged solid steel for unsurpassed strength and durability\u003c\/li\u003e\n\u003cli\u003eCoil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently.\u003c\/li\u003e\n\u003cli\u003eIncludes our Premium N3 shock absorbers.\u003c\/li\u003e\n\u003cli\u003eX-Flex control arm features:\n\u003c\/li\u003e\n\u003cli\u003eClevite brand OEM style rubber bushings.\u003c\/li\u003e\n\u003cli\u003eFlex joints feature a massive 2.5\" diameter body and 1.25\" thread.\u003c\/li\u003e\n\u003cli\u003eFully greaseable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNOTES - IMPORTANT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT fit 4-door (Unlimited) models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2Dr\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115706790065,"sku":"67330","price":1499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/cuh5k6r2iy6ak08x9xht.jpg?v=1793278301"},{"product_id":"66970-rough-country-3-25in-suspension-lift-kit-w-v2-shocks","title":"Rough Country 3.25in Suspension Lift Kit w\/ V2 Shocks","description":"\u003cp\u003eWho says your daily driver and your weekend warrior can't be the same vehicle? The 3.25-inch V2-Series Kit for Jeep JK was engineered by Rough Country's Research and Development Team to give the perfect blend of off-road performance and smooth highway ride. A set of application tuned, lifted coil springs are included in this kit along with a set of rear sway bar links, coil spring spacers and a rear track bar bracket!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eClears up to 35\" tire\u003c\/li\u003e\n\u003cli\u003eFactory tuned coil springs are based on the stock spring rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes - Important\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT fit 2-door models.\u003c\/li\u003e\n\u003cli\u003eIf planning on running 35\" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 3.25in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire Clearance:\u003c\/strong\u003e 35.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115707707569,"sku":"66970","price":789.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mgtjewm9rnaoxsbhjsup.jpg?v=1793278306"},{"product_id":"67370-rough-country-4in-x-series-suspension-lift-kit-w-v2-shocks","title":"Rough Country X-Series 4in Suspension Lift Kit w\/ V2 Shocks","description":"\u003cp\u003eTotal transformation on and off the trail starts with Rough Country's 4-Inch X-Series Suspension Lift Kit for Jeep. This all-inclusive package delivers aggressive styling, increased ground clearance, and enhanced off-road capability for the ultimate upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Adjustable Control Arms:\u003c\/strong\u003e This kit includes front and rear upper and lower X-Flex Control Arms featuring a high-clearance design. Built with OEM-style rubber bushings, fully rebuildable flex joints, and massive 2.5-inch diameter bodies with 1.25-inch threads, these arms are fully greasable for long-lasting durability and superior articulation. Fine-tune your ride height and suspension geometry with ease.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Suspension Geometry:\u003c\/strong\u003e Lifted coil springs and rear coil correction plates provide the perfect combination of ride height and vibration dampening. The correction plates adjust the rear coil spring angle by 10 degrees, allowing for optimal suspension performance across any terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Forged Adjustable Track Bar: \u003c\/strong\u003eStrength and stability are delivered by a 16-pound forged solid steel Adjustable Front Track Bar. This heavy-duty component outmatches stock parts, maintaining precise axle alignment and control even during extreme off-road flexing. It's fully adjustable on the vehicle and easy to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options for Any Terrain:\u003c\/strong\u003e Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks to match your driving style. From versatile daily comfort to maximum off-road control, this kit lets you tailor your suspension for any adventure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfident, Balanced Stance: \u003c\/strong\u003eThis lift kit levels the front of your Jeep with the rear, creating a commanding, well-balanced look that performs as good as it looks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeace of Mind Guaranteed: \u003c\/strong\u003eBacked by Rough Country's Limited Lifetime Replacement Warranty, you can hit the trails knowing your investment is protected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Bolt-On Installation: Simple, no-cutting-required setup for a quick, hassle-free upgrade.\u003c\/li\u003e\n\u003cli\u003eIncreased Ground Clearance: Gain extra ride height to tackle off-road obstacles with confidence.\u003c\/li\u003e\n\u003cli\u003eFront-to-Rear Level Stance: Levels the front of your vehicle with the rear for a balanced, aggressive profile.\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Adjustable Front Track Bar: Constructed from forged solid steel for unmatched strength, durability, and precise axle alignment.\u003c\/li\u003e\n\u003cli\u003eRear Coil Correction Plates: Correct the rear coil spring angle by 10 degrees, optimizing suspension geometry and improving overall performance.\u003c\/li\u003e\n\u003cli\u003eX-Flex Control Arms: Built for extreme flex with OEM-style rubber bushings, fully rebuildable flex joints, a massive 2.5\" diameter body with 1.25\" threads, and a fully greasable design for maximum durability and articulation.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e fit 4-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115707871409,"sku":"67370","price":1819.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RCS67370.jpg?v=1793278307"},{"product_id":"67430-rough-country-4in-x-series-suspension-lift-kit-w-n3-shocks","title":"Rough Country X-Series 4in Suspension Lift Kit w\/ N3 Shocks","description":"\u003cp\u003eTotal transformation on and off the trail starts with Rough Country's 4-Inch X-Series Suspension Lift Kit for Jeep. This all-inclusive package delivers aggressive styling, increased ground clearance, and enhanced off-road capability for the ultimate upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Adjustable Control Arms:\u003c\/strong\u003e This kit includes front and rear upper and lower X-Flex Control Arms featuring a high-clearance design. Built with OEM-style rubber bushings, fully rebuildable flex joints, and massive 2.5-inch diameter bodies with 1.25-inch threads, these arms are fully greasable for long-lasting durability and superior articulation. Fine-tune your ride height and suspension geometry with ease.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Suspension Geometry:\u003c\/strong\u003e Lifted coil springs and rear coil correction plates provide the perfect combination of ride height and vibration dampening. The correction plates adjust the rear coil spring angle by 10 degrees, allowing for optimal suspension performance across any terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Forged Adjustable Track Bar:\u003c\/strong\u003e Strength and stability are delivered by a 16-pound forged solid steel Adjustable Front Track Bar. This heavy-duty component outmatches stock parts, maintaining precise axle alignment and control even during extreme off-road flexing. It's fully adjustable on the vehicle and easy to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options for Any Terrain:\u003c\/strong\u003e Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks to match your driving style. From versatile daily comfort to maximum off-road control, this kit lets you tailor your suspension for any adventure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfident, Balanced Stance: \u003c\/strong\u003eThis lift kit levels the front of your Jeep with the rear, creating a commanding, well-balanced look that performs as good as it looks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeace of Mind Guaranteed: \u003c\/strong\u003eBacked by Rough Country's Limited Lifetime Replacement Warranty, you can hit the trails knowing your investment is protected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Bolt-On Installation: Simple, no-cutting-required setup for a quick, hassle-free upgrade.\u003c\/li\u003e\n\u003cli\u003eIncreased Ground Clearance: Gain extra ride height to tackle off-road obstacles with confidence.\u003c\/li\u003e\n\u003cli\u003eFront-to-Rear Level Stance: Levels the front of your vehicle with the rear for a balanced, aggressive profile.\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Adjustable Front Track Bar: Constructed from forged solid steel for unmatched strength, durability, and precise axle alignment.\u003c\/li\u003e\n\u003cli\u003eRear Coil Correction Plates: Correct the rear coil spring angle by 10 degrees, optimizing suspension geometry and improving overall performance.\u003c\/li\u003e\n\u003cli\u003eX-Flex Control Arms: Built for extreme flex with OEM-style rubber bushings, fully rebuildable flex joints, a massive 2.5\" diameter body with 1.25\" threads, and a fully greasable design for maximum durability and articulation.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes\u003cstrong\u003e NOT\u003c\/strong\u003e fit 2-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115707904177,"sku":"67430","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RCS67430.jpg?v=1793278307"},{"product_id":"67470-rough-country-4in-x-series-suspension-lift-kit-w-v2-shocks","title":"Rough Country X-series 4in Suspension Lift Kit w\/ V2 Shocks","description":"\u003cp\u003eTotal transformation on and off the trail starts with Rough Country's 4-Inch X-Series Suspension Lift Kit for Jeep. This all-inclusive package delivers aggressive styling, increased ground clearance, and enhanced off-road capability for the ultimate upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Adjustable Control Arms: \u003c\/strong\u003eThis kit includes front and rear upper and lower X-Flex Control Arms featuring a high-clearance design. Built with OEM-style rubber bushings, fully rebuildable flex joints, and massive 2.5-inch diameter bodies with 1.25-inch threads, these arms are fully greasable for long-lasting durability and superior articulation. Fine-tune your ride height and suspension geometry with ease.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Suspension Geometry: \u003c\/strong\u003eLifted coil springs and rear coil correction plates provide the perfect combination of ride height and vibration dampening. The correction plates adjust the rear coil spring angle by 10 degrees, allowing for optimal suspension performance across any terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Forged Adjustable Track Bar: \u003c\/strong\u003eStrength and stability are delivered by a 16-pound forged solid steel Adjustable Front Track Bar. This heavy-duty component outmatches stock parts, maintaining precise axle alignment and control even during extreme off-road flexing. It's fully adjustable on the vehicle and easy to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options for Any Terrain:\u003c\/strong\u003e Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks to match your driving style. From versatile daily comfort to maximum off-road control, this kit lets you tailor your suspension for any adventure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfident, Balanced Stance: \u003c\/strong\u003eThis lift kit levels the front of your Jeep with the rear, creating a commanding, well-balanced look that performs as good as it looks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeace of Mind Guaranteed:\u003c\/strong\u003e Backed by Rough Country's Limited Lifetime Replacement Warranty, you can hit the trails knowing your investment is protected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Bolt-On Installation: Simple, no-cutting-required setup for a quick, hassle-free upgrade.\u003c\/li\u003e\n\u003cli\u003eIncreased Ground Clearance: Gain extra ride height to tackle off-road obstacles with confidence.\u003c\/li\u003e\n\u003cli\u003eFront-to-Rear Level Stance: Levels the front of your vehicle with the rear for a balanced, aggressive profile.\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Adjustable Front Track Bar: Constructed from forged solid steel for unmatched strength, durability, and precise axle alignment.\u003c\/li\u003e\n\u003cli\u003eRear Coil Correction Plates: Correct the rear coil spring angle by 10 degrees, optimizing suspension geometry and improving overall performance.\u003c\/li\u003e\n\u003cli\u003eX-Flex Control Arms: Built for extreme flex with OEM-style rubber bushings, fully rebuildable flex joints, a massive 2.5\" diameter body with 1.25\" threads, and a fully greasable design for maximum durability and articulation.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e fit 2-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115708428465,"sku":"67470","price":1919.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RCS67470.jpg?v=1793278308"},{"product_id":"67670-rough-country-3-25in-suspension-lift-kit-w-v2-shocks","title":"Rough Country 3.25in Suspension Lift Kit w\/ V2 Shocks","description":"\u003cp\u003eWho says your daily driver and your weekend warrior can't be the same vehicle? The 3.25-inch V2-Series Kit for Jeep JK was engineered by Rough Country's Research and Development Team to give the perfect blend of off-road performance and smooth highway ride. A set of application tuned, lifted coil springs are included in this kit along with a set of rear sway bar links, coil spring spacers and a rear track bar bracket!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eClears up to 35\" tire\u003c\/li\u003e\n\u003cli\u003eFactory tuned coil springs are based on the stock spring rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes - Important\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT fit 2-door models.\u003c\/li\u003e\n\u003cli\u003eIf planning on running 35\" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 3.25in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire Clearance:\u003c\/strong\u003e 35.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2Dr\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115708494001,"sku":"67670","price":789.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/c8oqkjwelnhe2jqpn1ez.jpg?v=1793278308"},{"product_id":"67870-rough-country-2-5in-suspension-lift-kit-w-v2-shocks","title":"Rough Country 2.5in Suspension Lift Kit w\/ V2 Shocks and Relocation Brackets","description":"\u003cp\u003eElevate your Jeep's off-road game and style with Rough Country's 2.5\" Suspension Lift Kit. Perfect for larger wheels and tires, this kit enhances your vehicle's ground clearance and gives it a rugged, attention-grabbing look on and off the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifted Front \u0026amp; Rear Coil Springs:\u003c\/strong\u003e Achieve a taller stance while maintaining factory-like ride quality. These coil springs are tuned to the OEM spring rate for smooth handling whether you're tackling rocky terrain or cruising highways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options:\u003c\/strong\u003e Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Designed for straightforward installation, this kit includes everything you need for a seamless upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e With Rough Country's Limited Lifetime Replacement Guarantee, this suspension lift kit is built to endure the toughest trails and environments.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Jeep today and experience superior off-road capability and unmatched style with Rough Country's 2.5\" Suspension Lift Kit!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEffortless Bolt-On Installation: No welding or custom modifications required for a smooth, straightforward setup.\u003c\/li\u003e\n\u003cli\u003eEnhanced Ground Clearance:Achieve better off-road performance with increased clearance to tackle tougher terrains with ease.\u003c\/li\u003e\n\u003cli\u003eFactory-Tuned Coil Springs: Designed to match the stock spring rate, ensuring a balanced ride while optimizing handling and performance.\u003c\/li\u003e\n\u003cli\u003eBuilt for Off-Road Performance: Unlock the ability to run larger wheels and tires for enhanced off-road capability and a more aggressive appearance.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e fit 4-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 2.50in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire Clearance:\u003c\/strong\u003e 33.00in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115708559537,"sku":"67870","price":689.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/sygppjabyyki5xhb2goo.jpg?v=1793278309"},{"product_id":"230-37s3k-evo-manufacturing-4in-enforcer-stage-3-lift-kit-w-draglink-flip-kit-and-king-shocks","title":"EVO Manufacturing 4in Enforcer Stage 3 Lift Kit w\/ Draglink Flip Kit and King Shocks","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration.  Fatigue to occupants, Reliability, Functionality, Affordability.  For the challenge we deemed the EVO MFG ENFORCER Suspension package.\u003c\/p\u003e\n\u003cp\u003eEVO Smoothed and Balanced the Overall Ride Quality with EVO MFG Plush Coils Front Adjustable Lower Control Arms to correct caster angle with EVO MFG on Vehicle Adjusters \/ Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\/ Stage3 includes all 8 Adjustable Control arms for full suspension tuning.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear Roll Center correction trackbar bracket \u003c\/li\u003e\n\u003cli\u003eStainless Steel Brake lines \u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, when lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more.  Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK.  Roll center is greatly improved giving better handling of the vehicle on and off-road   Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes complete with new forged draglink  \u003c\/li\u003e\n\u003cli\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal  \u003c\/li\u003e\n\u003cli\u003eAll bracketry is finished in a corrosion resistant Black Powder coat  \u003c\/li\u003e\n\u003cli\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/li\u003e\n\u003cli\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115708723377,"sku":"230-37S3K","price":6198.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/EVO23037S3K.jpg?v=1793278310"},{"product_id":"68130-rough-country-4in-suspension-lift-kit-w-n3-shocks","title":"Rough Country 4in Suspension Lift Kit w\/ N3 Shocks","description":"\u003cp\u003eTotal transformation for your Jeep starts with Rough Country's 4-Inch Suspension Lift Kit. This all-inclusive upgrade delivers aggressive styling, enhanced ground clearance, and the rugged performance you need to conquer any trail with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered for Superior Suspension Geometry:\u003c\/strong\u003e Lifted coil springs pair with coil correction plates that adjust the rear coil spring angle by 10 degrees. This design improves suspension efficiency, reduces component wear, and optimizes vibration dampening across rough terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options: \u003c\/strong\u003eTailor your ride with nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks. Whether you want balanced on-road comfort or elite off-road control, this kit lets you fine-tune performance to your driving style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClears Up to 35-Inch Tires:\u003c\/strong\u003e Gain the clearance to run up to 35-inch tires, giving your Jeep a commanding stance and greater off-road capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacked by Rough Country's Limited Lifetime Warranty:\u003c\/strong\u003e Drive with confidence knowing your investment is protected with Rough Country's limited lifetime replacement warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHassle-Free Bolt-On Installation: Simple, no-cutting required design for a quick and secure setup.\u003c\/li\u003e\n\u003cli\u003eEnhanced Ground Clearance: Gain extra ride height for improved off-road capability and obstacle clearance.\u003c\/li\u003e\n\u003cli\u003eOptimized Rear Coil Geometry: Coil correction plates adjust the rear coil spring angle by 10 degrees for improved suspension efficiency and longevity.\u003c\/li\u003e\n\u003cli\u003eFits Up to 35-Inch Tires: Provides the necessary clearance to run larger tires for a more aggressive stance and better trail performance.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e fit 2-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003cli\u003eIf using stock wheels 1.5in wheel spacers are required.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115708788913,"sku":"68130","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RCS68130.jpg?v=1793278311"},{"product_id":"230-37s2k-evo-manufacturing-4in-enforcer-stage-2-lift-kit-w-draglink-flip-kit-and-king-shocks","title":"EVO Manufacturing 4in Enforcer Stage 2 Lift Kit w\/ Draglink Flip Kit and King Shocks","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration. Fatigue to occupants, Reliability, Functionality, Affordability. For the challenge we deemed the EVO MFG ENFORCER Suspension package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe Smoothed and Balanced the Overall Ride Quality with EVO Plush Coils\u003c\/li\u003e\n\u003cli\u003eStage 1 Front Adjustable Lower Control Arms to correct caster angle\u003c\/li\u003e\n\u003cli\u003eStage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\u003c\/li\u003e\n\u003cli\u003eStage 3 includes all 8 Adjustable Control arms for full suspension tuning.\u003c\/li\u003e\n\u003cli\u003eRear Roll Center correction trackbar bracket\u003c\/li\u003e\n\u003cli\u003eStainless Steel Brakelines\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling of the vehicle on and off road Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes complete with new forged draglink\u003c\/li\u003e\n\u003cli\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal\u003c\/li\u003e\n\u003cli\u003eAll bracketry is finished in a corrosion resistant Black Powdercoat\u003c\/li\u003e\n\u003cli\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/li\u003e\n\u003cli\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eACTUAL ITEMS MAY VARY FROM PRODUCT IMAGE\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115708821681,"sku":"230-37S2K","price":5223.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/EVO23037S2K.jpg?v=1793278311"},{"product_id":"68170-rough-country-4in-suspension-lift-kit-w-v2-shocks","title":"Rough Country 4in Suspension Lift Kit w\/ V2 Shocks","description":"\u003cp\u003eTotal transformation for your Jeep starts with Rough Country's 4-Inch Suspension Lift Kit. This all-inclusive upgrade delivers aggressive styling, enhanced ground clearance, and the rugged performance you need to conquer any trail with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered for Superior Suspension Geometry:\u003c\/strong\u003e Lifted coil springs pair with coil correction plates that adjust the rear coil spring angle by 10 degrees. This design improves suspension efficiency, reduces component wear, and optimizes vibration dampening across rough terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options:\u003c\/strong\u003e Tailor your ride with nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks. Whether you want balanced on-road comfort or elite off-road control, this kit lets you fine-tune performance to your driving style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClears Up to 35-Inch Tires:\u003c\/strong\u003e Gain the clearance to run up to 35-inch tires, giving your Jeep a commanding stance and greater off-road capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacked by Rough Country's Limited Lifetime Warranty: \u003c\/strong\u003eDrive with confidence knowing your investment is protected with Rough Country's limited lifetime replacement warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHassle-Free Bolt-On Installation: Simple, no-cutting required design for a quick and secure setup.\u003c\/li\u003e\n\u003cli\u003eEnhanced Ground Clearance: Gain extra ride height for improved off-road capability and obstacle clearance.\u003c\/li\u003e\n\u003cli\u003eOptimized Rear Coil Geometry: Coil correction plates adjust the rear coil spring angle by 10 degrees for improved suspension efficiency and longevity.\u003c\/li\u003e\n\u003cli\u003eFits Up to 35-Inch Tires: Provides the necessary clearance to run larger tires for a more aggressive stance and better trail performance.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT \u003c\/strong\u003efit 2-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003cli\u003eIf using stock wheels 1.5in wheel spacers are required.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115708854449,"sku":"68170","price":969.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RCS68170.jpg?v=1793278311"},{"product_id":"230-37s1k-evo-manufacturing-4in-enforcer-stage-1-lift-kit-w-draglink-flip-kit-and-king-shocks","title":"EVO Manufacturing 4in Enforcer Stage 1 Lift Kit w\/ Draglink Flip Kit and King Shocks","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration. Fatigue to occupants, Reliability, Functionality, Affordability. For the challenge we deemed the EVO MFG ENFORCER Suspension package.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmoothed and Balanced the Overall Ride Quality with EVO Plush Coils\u003c\/li\u003e\n\u003cli\u003eStage 1 Front Adjustable Lower Control Arms to correct caster angle\u003c\/li\u003e\n\u003cli\u003eStage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\u003c\/li\u003e\n\u003cli\u003eStage 3 includes all 8 Adjustable Control arms for full suspension tuning.\u003c\/li\u003e\n\u003cli\u003eRear Roll Center correction trackbar bracket\u003c\/li\u003e\n\u003cli\u003eStainless Steel Brakelines\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling of the vehicle on and off road Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes complete with new forged draglink\u003c\/li\u003e\n\u003cli\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal\u003c\/li\u003e\n\u003cli\u003eAll bracketry is finished in a corrosion resistant Black Powdercoat\u003c\/li\u003e\n\u003cli\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/li\u003e\n\u003cli\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eINSTALLATION TIME 5-12 HOURS (Optioned Product Dependent)\u003c\/p\u003e\n\u003cp\u003eACTUAL ITEMS MAY VARY FROM PRODUCT IMAGE\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115709051057,"sku":"230-37S1K","price":4688.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/EVO23037S1K.jpg?v=1793278311"},{"product_id":"68230-rough-country-4in-suspension-lift-kit-w-n3-shocks","title":"Rough Country 4in Suspension Lift Kit w\/ N3 Shocks","description":"\u003cp\u003eTotal transformation for your Jeep starts with Rough Country's 4-Inch Suspension Lift Kit. This all-inclusive upgrade delivers aggressive styling, enhanced ground clearance, and the rugged performance you need to conquer any trail with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered for Superior Suspension Geometry:\u003c\/strong\u003e Lifted coil springs pair with coil correction plates that adjust the rear coil spring angle by 10 degrees. This design improves suspension efficiency, reduces component wear, and optimizes vibration dampening across rough terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Shock Options: \u003c\/strong\u003eTailor your ride with nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks. Whether you want balanced on-road comfort or elite off-road control, this kit lets you fine-tune performance to your driving style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClears Up to 35-Inch Tires:\u003c\/strong\u003e Gain the clearance to run up to 35-inch tires, giving your Jeep a commanding stance and greater off-road capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacked by Rough Country's Limited Lifetime Warranty: \u003c\/strong\u003eDrive with confidence knowing your investment is protected with Rough Country's limited lifetime replacement warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHassle-Free Bolt-On Installation: Simple, no-cutting required design for a quick and secure setup.\u003c\/li\u003e\n\u003cli\u003eEnhanced Ground Clearance: Gain extra ride height for improved off-road capability and obstacle clearance.\u003c\/li\u003e\n\u003cli\u003eOptimized Rear Coil Geometry: Coil correction plates adjust the rear coil spring angle by 10 degrees for improved suspension efficiency and longevity.\u003c\/li\u003e\n\u003cli\u003eFits Up to 35-Inch Tires: Provides the necessary clearance to run larger tires for a more aggressive stance and better trail performance.\u003c\/li\u003e\n\u003cli\u003eCustom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e fit 4-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.\u003c\/li\u003e\n\u003cli\u003eIf using stock wheels 1.5in wheel spacers are required.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally, this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2DR\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115709083825,"sku":"68230","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/RCS68230.jpg?v=1793278312"},{"product_id":"230-35s3k-evo-manufacturing-3in-enforcer-stage-3-lift-kit-w-draglink-flip-kit-and-king-shocks","title":"EVO Manufacturing 3in Enforcer Stage 3 Lift Kit w\/ Draglink Flip Kit and King Shocks","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration.  Fatigue to occupants, Reliability, Functionality, Affordability.  For the challenge we deemed the EVO MFG ENFORCER Suspension package.\u003c\/p\u003e\n\u003cp\u003eWe Smoothed and Balanced the Overall Ride Quality with EVO MFG Plush Coils Front Adjustable Lower Control Arms to correct caster angle with EVO MFG on Vehicle Adjusters \/ Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\/ Stage3 includes all 8 Adjustable Control arms for full suspension tuning.  \u003c\/p\u003e\n\u003cp\u003eRear Roll Center correction trackbar bracket\u003c\/p\u003e\n\u003cp\u003eStainless Steel Brakelines \u003c\/p\u003e\n\u003cp\u003eAll necessary hardware included \u003c\/p\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, when lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more.  Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK.  Roll center is greatly improved giving better handling of the vehicle on and off-road   Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket  \u003c\/p\u003e\n\u003cp\u003eComes complete with new forged draglink  \u003c\/p\u003e\n\u003cp\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal  \u003c\/p\u003e\n\u003cp\u003eAll bracketry is finished in a corrosion resistant Black Powdercoat  \u003c\/p\u003e\n\u003cp\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/p\u003e\n\u003cp\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115709247665,"sku":"230-35S3K","price":6198.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/sglsifpsxniv0evqke5a.jpg?v=1793278312"},{"product_id":"68270-rough-country-4in-suspension-lift-kit-w-v2-shocks","title":"Rough Country 4in Suspension Lift Kit w\/ V2 Shocks","description":"\u003cp\u003eGive your Jeep a total transformation with Rough Country’s 4in Suspension Lift! This all-inclusive kit comes with everything you need to give your vehicle aggressive good looks and improved off-road performance!\u003cbr\u003e\n\u003cbr\u003e\nThis kit features lifted coil springs and coil correction plates, providing lift height and impeccable vibration dampening on any terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eCoil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes - Important\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT fit 4-door (Unlimited) models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 4.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2Dr\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115709378737,"sku":"68270","price":969.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/mqsgnv8epxnzbcgkdt2o.jpg?v=1793278312"},{"product_id":"69370-rough-country-3-5in-suspension-lift-kit-w-v2-shocks-and-drop-brackets","title":"Rough Country 3.5in Suspension Lift Kit w\/ V2 Shocks and Drop Brackets","description":"\u003cp\u003eGet the smoothest-riding, best-handling Jeep JK Lift Kit on the market with Rough Country’s 3.5in Control Arm Drop Kit! This all-inclusive kit comes with everything you need for a total transformation of your Jeep that promotes impressive drivability and a smooth on or off-road ride quality!\u003cbr\u003e\n\u003cbr\u003e\nThis kit features a set of front and rear lifted coil springs that offer enough ground clearance to run 35x12.50 tires and Rough Country’s premium V2 Shocks for a silky-smooth ride. This kit also features control arm drop brackets, engineered to relocate your factory control arms to the optimum geometry for incredible handling and drivability you won’t find in other setups.\u003cbr\u003e\n\u003cbr\u003e\nIncludes Rough Country’s Lifetime Replacement Guarantee!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eControl arm drop brackets promote optimum geometry for smooth handling \u0026amp; ride quality\u003c\/li\u003e\n\u003cli\u003eCoil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently.\u003c\/li\u003e\n\u003cli\u003eFactory tuned coil springs are based on the stock spring rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes - Important\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT fit 4-door models.\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 3.50in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire Clearance:\u003c\/strong\u003e 35.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2Dr\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115709411505,"sku":"69370","price":1069.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/zhgaiwissf7dxxurn9es.jpg?v=1793278313"},{"product_id":"69470-rough-country-3-5in-suspension-lift-kit-w-v2-shocks-and-drop-brackets","title":"Rough Country 3.5in Suspension Lift Kit w\/ V2 Shocks and Drop Brackets","description":"\u003cp\u003eGet the smoothest-riding, best-handling Jeep JK Lift Kit on the market with Rough Country’s 3.5in Control Arm Drop Kit! This all-inclusive kit comes with everything you need for a total transformation of your Jeep that promotes impressive drivability and a smooth on or off-road ride quality!\u003cbr\u003e\n\u003cbr\u003e\nThis kit features a set of front and rear lifted coil springs that offer enough ground clearance to run 35x12.50 tires and Rough Country’s premium V2 Shocks for a silky-smooth ride. This kit also features control arm drop brackets, engineered to relocate your factory control arms to the optimum geometry for incredible handling and drivability you won’t find in other setups.\u003cbr\u003e\n\u003cbr\u003e\nIncludes Rough Country’s Lifetime Replacement Guarantee!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\u003cli\u003eControl arm drop brackets promote optimum geometry for smooth handling \u0026amp; ride quality\u003c\/li\u003e\n\u003cli\u003eCoil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently.\u003c\/li\u003e\n\u003cli\u003eFactory tuned coil springs are based on the stock spring rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes - Important\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT fit 2-door models.\u003c\/li\u003e\n\u003cli\u003e2012-2018 models require exhaust modifications to clear the front driveshaft. (#1030)\u003c\/li\u003e\n\u003cli\u003eOn Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arms Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Method:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 3.50in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Spring and Shock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShocks Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire Clearance:\u003c\/strong\u003e 35.00in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Bar Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":48115709477041,"sku":"69470","price":1069.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/pqwmkrfnt9smtjfow2nn.jpg?v=1793278313"},{"product_id":"230-37s2-evo-manufacturing-4in-enforcer-stage-2-package-w-shock-options","title":"EVO Manufacturing 4in Enforcer Stage 2 Package w\/ Shock Options","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration. Fatigue to occupants, Reliability, Functionality, Affordability. For the challenge we deemed the EVO MFG ENFORCER Suspension package.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEVO Smoothed and Balanced the Overall Ride Quality with EVO Plush Coils\u003c\/li\u003e\n\u003cli\u003eStage 1 Front Adjustable Lower Control Arms to correct caster angle\u003c\/li\u003e\n\u003cli\u003eStage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\u003c\/li\u003e\n\u003cli\u003eStage 3 includes all 8 Adjustable Control arms for full suspension tuning.\u003c\/li\u003e\n\u003cli\u003eRear Roll Center correction trackbar bracket\u003c\/li\u003e\n\u003cli\u003eStainless Steel Brakelines\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling of the vehicle on and off road Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes complete with new forged draglink\u003c\/li\u003e\n\u003cli\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal\u003c\/li\u003e\n\u003cli\u003eAll bracketry is finished in a corrosion resistant Black Powdercoat\u003c\/li\u003e\n\u003cli\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/li\u003e\n\u003cli\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eACTUAL ITEMS MAY VARY FROM PRODUCT IMAGE\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115712721073,"sku":"230-37S2","price":2754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/lh43cfe9rdfi0szmrazb.jpg?v=1793278334"},{"product_id":"230-35s2-evo-manufacturing-3in-enforcer-stage-2-package-w-shock-options","title":"EVO Manufacturing 3in Enforcer Stage 2 Package w\/ Shock Options","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eJeep Bilstein 5100 Series Front Shock: Elevate Your Jeep Experience\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Performance:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eElevate your on and off-road performance to new heights.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Jeeps with a 3-5\" lift, these shocks are tailored to meet the demands of true trail conquerors.\u003c\/li\u003e\n\u003cli\u003eExperience improved rebound, response, and articulation, ensuring your Jeep performs as spectacularly as it looks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy, Bolt-On Installation:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEffortlessly enhance your Jeep's capabilities with a straightforward bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for hassle-free integration, these shocks replace your factory shocks while utilizing your stock shock mount and spring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt with Bilstein's renowned Patented Triple-C-Technology, featuring a zinc-plated silver finish for ultimate corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBoasts a 46mm digressive piston and a nitrogen gas-charged mono-tube design for superior longevity and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Valving:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe self-adjusting, deflective disc design of the valving ensures effectiveness across a spectrum of applications.\u003c\/li\u003e\n\u003cli\u003eExperience a smoother, crisper ride on both the street and the highway, without compromising performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Bilstein?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Bilstein's commitment to precision engineering is evident in every aspect of the 5100 Series, ensuring optimal performance in any terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrail-Tested Reliability:\u003c\/strong\u003e Trusted by Jeep enthusiasts worldwide, Bilstein shocks are rigorously tested to withstand the toughest off-road conditions, providing peace of mind on every adventure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailored for Jeep Enthusiasts:\u003c\/strong\u003e Bilstein understands the passion that fuels Jeep owners. The 5100 Series is crafted to complement the unique demands of Jeep Wrangler enthusiasts, offering a ride that matches the thrill of the trail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Jeep's suspension with the Bilstein 5100 Series Front Shocks – where performance meets passion. Elevate your driving experience and conquer the trails with confidence. Order now and embark on a journey of unrivaled off-road excellence!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Be sure to double check the fitment to make sure you are getting the proper shock for your build.\u003c\/p\u003e\n\u003cp\u003e*\u003cstrong\u003eNOTE - Due to varying lift heights we always recommend you measure the shock length you need to ensure proper fitment on your application\u003c\/strong\u003e*\u003c\/p\u003e\n\u003cp\u003eMore Jeep 3 to 5 Lift Jeep Shocks\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115712819377,"sku":"230-35S2","price":2754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/l1emgl1svurcndyjudtp.jpg?v=1793278335"},{"product_id":"230-35s1-evo-manufacturing-3in-enforcer-stage-1-package-w-shock-options","title":"EVO Manufacturing 3in Enforcer Stage 1 Package w\/ Shock Options","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eJeep Bilstein 5100 Series Front Shock: Elevate Your Jeep Experience\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Performance:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eElevate your on and off-road performance to new heights.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Jeeps with a 3-5\" lift, these shocks are tailored to meet the demands of true trail conquerors.\u003c\/li\u003e\n\u003cli\u003eExperience improved rebound, response, and articulation, ensuring your Jeep performs as spectacularly as it looks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy, Bolt-On Installation:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEffortlessly enhance your Jeep's capabilities with a straightforward bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for hassle-free integration, these shocks replace your factory shocks while utilizing your stock shock mount and spring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt with Bilstein's renowned Patented Triple-C-Technology, featuring a zinc-plated silver finish for ultimate corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBoasts a 46mm digressive piston and a nitrogen gas-charged mono-tube design for superior longevity and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Valving:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe self-adjusting, deflective disc design of the valving ensures effectiveness across a spectrum of applications.\u003c\/li\u003e\n\u003cli\u003eExperience a smoother, crisper ride on both the street and the highway, without compromising performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Bilstein?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Bilstein's commitment to precision engineering is evident in every aspect of the 5100 Series, ensuring optimal performance in any terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrail-Tested Reliability:\u003c\/strong\u003e Trusted by Jeep enthusiasts worldwide, Bilstein shocks are rigorously tested to withstand the toughest off-road conditions, providing peace of mind on every adventure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailored for Jeep Enthusiasts:\u003c\/strong\u003e Bilstein understands the passion that fuels Jeep owners. The 5100 Series is crafted to complement the unique demands of Jeep Wrangler enthusiasts, offering a ride that matches the thrill of the trail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Jeep's suspension with the Bilstein 5100 Series Front Shocks – where performance meets passion. Elevate your driving experience and conquer the trails with confidence. Order now and embark on a journey of unrivaled off-road excellence!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Be sure to double check the fitment to make sure you are getting the proper shock for your build.\u003c\/p\u003e\n\u003cp\u003e*\u003cstrong\u003eNOTE - Due to varying lift heights we always recommend you measure the shock length you need to ensure proper fitment on your application\u003c\/strong\u003e*\u003c\/p\u003e\n\u003cp\u003eMore Jeep 3 to 5 Lift Jeep Shocks\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115713179825,"sku":"230-35S1","price":2219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/xwengn17hvox8bzyse0g.jpg?v=1793278336"},{"product_id":"230-37s1-evo-manufacturing-4in-enforcer-stage-1-package-w-shock-options","title":"EVO Manufacturing 4in Enforcer Stage 1 Package w\/ Shock Options","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration. Fatigue to occupants, Reliability, Functionality, Affordability. For the challenge we deemed the EVO MFG ENFORCER Suspension package.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEVO Smoothed and Balanced the Overall Ride Quality with EVO Plush Coils\u003c\/li\u003e\n\u003cli\u003eStage 1 Front Adjustable Lower Control Arms to correct caster angle\u003c\/li\u003e\n\u003cli\u003eStage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\u003c\/li\u003e\n\u003cli\u003eStage 3 includes all 8 Adjustable Control arms for full suspension tuning.\u003c\/li\u003e\n\u003cli\u003eRear Roll Center correction trackbar bracket\u003c\/li\u003e\n\u003cli\u003eStainless Steel Brakelines\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling of the vehicle on and off road Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes complete with new forged draglink\u003c\/li\u003e\n\u003cli\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal\u003c\/li\u003e\n\u003cli\u003eAll bracketry is finished in a corrosion resistant Black Powdercoat\u003c\/li\u003e\n\u003cli\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/li\u003e\n\u003cli\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eACTUAL ITEMS MAY VARY FROM PRODUCT IMAGE\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115713343665,"sku":"230-37S1","price":2219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/pe8hol5lmi0kykieyv7h.jpg?v=1793278336"},{"product_id":"230-35s3-evo-manufacturing-3in-enforcer-stage-3-package-w-shock-options","title":"EVO Manufacturing 3in Enforcer Stage 3 Package w\/ Shock Options","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eJeep Bilstein 5100 Series Front Shock: Elevate Your Jeep Experience\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Performance:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eElevate your on and off-road performance to new heights.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Jeeps with a 3-5\" lift, these shocks are tailored to meet the demands of true trail conquerors.\u003c\/li\u003e\n\u003cli\u003eExperience improved rebound, response, and articulation, ensuring your Jeep performs as spectacularly as it looks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy, Bolt-On Installation:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEffortlessly enhance your Jeep's capabilities with a straightforward bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for hassle-free integration, these shocks replace your factory shocks while utilizing your stock shock mount and spring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt with Bilstein's renowned Patented Triple-C-Technology, featuring a zinc-plated silver finish for ultimate corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBoasts a 46mm digressive piston and a nitrogen gas-charged mono-tube design for superior longevity and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Valving:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe self-adjusting, deflective disc design of the valving ensures effectiveness across a spectrum of applications.\u003c\/li\u003e\n\u003cli\u003eExperience a smoother, crisper ride on both the street and the highway, without compromising performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Bilstein?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Bilstein's commitment to precision engineering is evident in every aspect of the 5100 Series, ensuring optimal performance in any terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrail-Tested Reliability:\u003c\/strong\u003e Trusted by Jeep enthusiasts worldwide, Bilstein shocks are rigorously tested to withstand the toughest off-road conditions, providing peace of mind on every adventure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailored for Jeep Enthusiasts:\u003c\/strong\u003e Bilstein understands the passion that fuels Jeep owners. The 5100 Series is crafted to complement the unique demands of Jeep Wrangler enthusiasts, offering a ride that matches the thrill of the trail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Jeep's suspension with the Bilstein 5100 Series Front Shocks – where performance meets passion. Elevate your driving experience and conquer the trails with confidence. Order now and embark on a journey of unrivaled off-road excellence!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Be sure to double check the fitment to make sure you are getting the proper shock for your build.\u003c\/p\u003e\n\u003cp\u003e*\u003cstrong\u003eNOTE - Due to varying lift heights we always recommend you measure the shock length you need to ensure proper fitment on your application\u003c\/strong\u003e*\u003c\/p\u003e\n\u003cp\u003eMore Jeep 3 to 5 Lift Jeep Shocks\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115713638577,"sku":"230-35S3","price":3729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/b4jtxgsg13hv0tfx7wpx.jpg?v=1793278337"},{"product_id":"1421fs-bds-suspension-5-5in-long-arm-lift-kit-w-fox-2-0-shocks-and-disconnects","title":"BDS Suspension 5.5in Long Arm Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Disconnects","description":"\u003cp\u003eMaximize the capability of your Jeep Wrangler 2 Door with this 5.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires. This 4-inch lift kit system improves on the factory 4-link with a redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes new pivot mounts that are constructed from 1\/4\" thick steel and work with the new heavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics, 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel, but increase wheel travel. Also included are braided stainless steel brake lines, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes new pivot mounts designed to work with the new heavy duty lower flex arms and adjustable upper flex arms, Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 4\" lift kit with FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong Arm Conversion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrading the standard control arms to a long arm adds strength, improves handling and takes offroad articulation to the next level. This upgrade consists of massive 1\/4\" steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned 4-link long arm to improve articulation and offer better control throughout wheel travel\u003c\/li\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eFOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisconnects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGain 30 percent more axle articulationl by disconnecting your front sway bar\u003c\/li\u003e\n\u003cli\u003eConvenient grease fittings ensure easy bushing lubrication for smooth, silent operation\u003c\/li\u003e\n\u003cli\u003eStainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces\u003c\/li\u003e\n\u003cli\u003eSpherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 5.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 5\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe front and rear driveshafts are maxed out at full droop. The front driveshaft boot can contact the transmission pan at extreme articulation on some models. Replacement of the front and rear driveshafts are recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2Dr\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115713704113,"sku":"1421FS","price":3855.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1421FS.jpg?v=1793278338"},{"product_id":"230-37s3-evo-manufacturing-4in-enforcer-stage-3-package-w-shock-options","title":"EVO Manufacturing 4in Enforcer Stage 3 Draglink Flip Kit Lift Kit w\/ Shock Options","description":"\u003cp\u003eWhen EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration. Fatigue to occupants, Reliability, Functionality, Affordability. For the challenge, they deemed the EVO MFG ENFORCER Suspension package. They Smoothed and Balanced the Overall Ride Quality with EVO Plush Coils\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1 Front Adjustable Lower Control Arms to correct caster angle\u003c\/li\u003e\n\u003cli\u003eStage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStage 3 includes all 8 Adjustable Control arms for full suspension tuning.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear Roll Center correction trackbar bracket\u003c\/li\u003e\n\u003cli\u003eStainless Steel Brakelines\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling of the vehicle on and off road Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes complete with new forged draglink\u003c\/li\u003e\n\u003cli\u003eAll bracketry made from 3\/16” thick laser cut and CNC bent sheet metal\u003c\/li\u003e\n\u003cli\u003eAll bracketry is finished in a corrosion resistant Black Powdercoat\u003c\/li\u003e\n\u003cli\u003eIntegrated new steering stabilizer location built in to get it up and out of harm’s way above the tie rod.\u003c\/li\u003e\n\u003cli\u003eDrilling of the passenger side steering knuckle with 13\/16” drill bit is required to complete the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eACTUAL ITEMS MAY VARY FROM PRODUCT IMAGE\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK\u003c\/p\u003e","brand":"Evo Manufacturing","offers":[{"title":"Default Title","offer_id":48115713736881,"sku":"230-37S3","price":3729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/EVO23037S3.jpg?v=1793278338"},{"product_id":"1412fs-bds-suspension-3in-lift-kit-w-fox-2-0-shocks-and-fixed-links","title":"BDS Suspension 3in Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Fixed Links","description":"\u003cp\u003eUpgrade the ride and style of your 2007-2011 Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 3\" Pro-Ride coil springs capable of full coil bind and 2\" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eLower cam locks to correct caster for alignment\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 35\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003cli\u003eThis kit is right hand drive compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2007-11 4Dr Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115713802417,"sku":"1412FS","price":1318.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1412FS.jpg?v=1793278338"},{"product_id":"cho2interaflexpkg-rancho-2in-sport-suspension-system-rs900-shocks-teraflex-flexarm-kit","title":"Rancho 2in Sport Suspension System, RS900 Shocks, Teraflex Flexarm Kit","description":"\u003cp\u003eRancho® is proud to offer a new 2-in. Suspension System for the Jeep Wrangler JK. The 2-in. Rancho Suspension Progressive Sport Kit features our premium 9-way adjustable RS9000™XL shocks, front \u0026amp; rear variable rate coil springs to provide superior on-road comfort and off-road performance, rear brake line brackets, and front bump stops. This kit is precision engineered to be 100-percent compatible with the Jeep factory Electronic Stability System. The kit was designed with 33-in. tires and 17-in. wheels with 4.5-in. of backspacing, but also can accommodate 35-in. tire with minor trimming. Kit also allows the reuse of O.E. Wheels and tires. The Rancho brand offers a Limited Lifetime Warranty** for this suspension system.\u003c\/p\u003e\n\u003cp\u003eFor drivers who love off road adventures, they know they can trust Alpine products. The Teraflex Alpine Front Lower Flex Arm comes with the installation kit and is perfect for drivers in need of an after market upgrade. Offering durability and practicality, the flex arm is maintenance free and fully adjustable. Made from high quality bushings (factory version), the flex arm minimizes vibration and noise due to the rubber bushings (damping) located at either end. The powder black coating is corrosion and rust resistant and the pinch collar is a sturdy aluminum that will lock into place once the joint is in the proper position and length has been established. The wall DOM is 1 5\/8 inches by 0.156 inches and there are no maintenance joints as this helps to keep the flex quiet and smooth.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4dr\u003c\/p\u003e","brand":"Rancho Performance","offers":[{"title":"Default Title","offer_id":48115713835185,"sku":"CHO2INTERAFLEXPKG","price":1264.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/theuxcasz0xrk90xscsn.jpg?v=1793278338"},{"product_id":"1417fs-bds-suspension-4-inch-lift-kit-w-fox-2-0-performance-shocks-jk2dr","title":"BDS Suspension 4in Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Disconnects","description":"\u003cp\u003eTake your Jeep Wrangler JK 2 Door to the next level and improve the ride with this 4-inch lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed length lower control arms with OE grade rubber bushings that re-position the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle this kit includes fixed length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisconnects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGain 30 percent more axle articulation by disconnecting your front sway bar\u003c\/li\u003e\n\u003cli\u003eConvenient grease fittings ensure easy bushing lubrication for smooth, silent operation\u003c\/li\u003e\n\u003cli\u003eStainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces\u003c\/li\u003e\n\u003cli\u003eSpherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models, the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2DR 2012+\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115713900721,"sku":"1417FS","price":2276.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1417FS.jpg?v=1793278339"},{"product_id":"1414h-bds-suspension-4-5in-lift-kit-w-fixed-links-and-nx2-shocks","title":"BDS Suspension 4.5in Lift Kit w\/ NX2 Nitro Shocks \u0026 Fixed Links","description":"\u003cp\u003eTake your Jeep Wrangler JK 4 Door to the next level and improve the ride with this 4.5-inch lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed length lower control arms with OE grade rubber bushings that re-position the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle this kit includes fixed length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 4.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.This kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr 2007-11 Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115713933489,"sku":"1414H","price":1544.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1414H.jpg?v=1793278339"},{"product_id":"1406fs-bds-suspension-4-5in-lift-kit-w-fox-2-0-shocks-and-fixed-links","title":"BDS Suspension 4.5in Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Fixed Links","description":"\u003cp\u003eTake your Jeep Wrangler JK 4 Door to the next level and improve the ride with this 4.5-inch lift kit from BDS Suspension. Designed to strengthen stance, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes 4\" Pro-Ride coil springs, capable of full coil bind, and 3\" bump stop extensions to control compression travel while increasing wheel travel. Also included are brake line brackets, sway bar links, a front track bar relocation bracket, and a pitman arm, all designed to improve steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed-length lower control arms featuring OE-grade rubber bushings, which reposition the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear, the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame-mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle, this kit includes fixed-length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive-rate Pro-Ride coil springs is supplied to provide the correct lift height and a smooth, predictable ride across various terrains. Manufactured from high-tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameters. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle, paired with a heavy-duty track bar drop bracket to keep them in phase throughout suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 4.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the adjustable flex end arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2012+ 4Dr Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714228401,"sku":"1406FS","price":2202.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1406FS.jpg?v=1793278340"},{"product_id":"1422h-bds-5-5in-long-arm-lift-kit-w-fixed-links-and-nx2-shocks","title":"BDS Suspension 5.5in Long Arm Lift Kit w\/ NX2 Nitro Shocks \u0026 Fixed Links","description":"\u003cp\u003eMaximize the capability of your Jeep Wrangler 2 Door with this 5.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires. This 4-inch lift kit system improves on the factory 4-link with a redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes new pivot mounts that are constructed from 1\/4\" thick steel and work with the new heavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics, 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel but increase wheel travel. Also included are braided stainless steel brake lines, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes new pivot mounts designed to work with the new heavy duty lower flex arms and adjustable upper flex arms, Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 4\" lift kit with your choice of specially tuned NX2 nitro series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong Arm Conversion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrading the standard control arms to a long arm adds strength, improves handling, and takes offroad articulation to the next level. This upgrade consists of massive 1\/4\" steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned 4-link long arm to improve articulation and offer better control throughout wheel travel\u003c\/li\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eNX2 gas shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 5.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 5\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe front and rear driveshafts are maxed out at full droop. The front driveshaft boot can contact the transmission pan at extreme articulation on some models. Replacement of the front and rear driveshafts are recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2Dr Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714261169,"sku":"1422H","price":3009.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1422H.jpg?v=1793278340"},{"product_id":"1411fs-bds-suspension-3in-lift-kit-w-fox-2-0-shocks-and-disconnects","title":"BDS Suspension 3in Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Disconnects","description":"\u003cp\u003eUpgrade the ride and style of your Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 3\" Pro-Ride coil springs capable of full coil bind and 2\" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eLower cam locks to correct caster for alignment\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 35\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisconnects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGain 30 percent more axle articulation by disconnecting your front sway bar\u003c\/li\u003e\n\u003cli\u003eConvenient grease fittings ensure easy bushing lubrication for smooth, silent operation\u003c\/li\u003e\n\u003cli\u003eStainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces\u003c\/li\u003e\n\u003cli\u003eSpherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003cli\u003eThis kit is right hand drive compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2007-11 4Dr\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714457777,"sku":"1411FS","price":1423.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/kknhvoss6gsy2xwwmgvs.jpg?v=1793278340"},{"product_id":"1406h-bds-suspension-4-5in-lift-kit-w-nx2-shocks","title":"BDS Suspension 4.5in Lift Kit w\/ NX2 Nitro Shocks \u0026 Fixed Links","description":"\u003cp\u003eTake your Jeep Wrangler JK 4 Door to the next level and improve the ride with this 4.5-inch lift kit from BDS Suspension. Designed to strengthen stance, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes 4\" Pro-Ride coil springs, capable of full coil bind, and 3\" bump stop extensions to control compression travel while increasing wheel travel. Also included are brake line brackets, sway bar links, a front track bar relocation bracket, and a pitman arm, all designed to improve steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed-length lower control arms featuring OE-grade rubber bushings, which reposition the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear, the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame-mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle, this kit includes fixed-length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive-rate Pro-Ride coil springs is supplied to provide the correct lift height and a smooth, predictable ride across various terrains. Manufactured from high-tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameters. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle, paired with a heavy-duty track bar drop bracket to keep them in phase throughout suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 4.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the adjustable flex end arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e No Fine Print Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2012+ 4Dr Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714490545,"sku":"1406H","price":1602.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1406H.jpg?v=1793278341"},{"product_id":"1402fs-bds-suspension-2in-coil-spring-lift-kit-w-fox-shocks","title":"BDS Suspension 2in Coil Spring Lift Kit w\/ Fox 2.0 Performance Shocks","description":"\u003cp\u003eImprove the ride and style of your Jeep Wrangler JK 4 Door with this 2-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 33\" tires at an affordable price.\u003c\/p\u003e\n\u003cp\u003eThe lift kit includes front and rear BDS Pro-Ride Coil Springs, bump stop extensions, front lower control arm cam bolts and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eExtended sway bar links for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eLower cam locks to correct caster for alignment\u003c\/li\u003e\n\u003cli\u003eBump stop spacers to prevent harsh bottom outs\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 33\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e33 x 12.5 with 17 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 2\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 2\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr 2007-11\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714523313,"sku":"1402FS","price":1215.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1402FS.jpg?v=1793278341"},{"product_id":"1418h-bds-suspension-4in-lift-kit-w-nx2-shocks-and-fixed-links","title":"BDS Suspension 4in Lift Kit w\/ NX2 Nitro Shocks \u0026 Fixed Links","description":"\u003cp\u003eTake your Jeep Wrangler JK 2 Door to the next level and improve the ride with this 4-inch lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed length lower control arms with OE grade rubber bushings that re-position the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle this kit includes fixed length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models, the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2012+ 2DR Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714556081,"sku":"1418H","price":1562.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1418H.jpg?v=1793278341"},{"product_id":"1413fs-bds-suspension-4-5in-lift-kit-w-fox-2-0-shocks-and-disconnects","title":"BDS Suspension 4.5in Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Disconnects","description":"\u003cp\u003eTake your Jeep Wrangler JK 4 Door to the next level and improve the ride with this 4.5-inch lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed length lower control arms with OE grade rubber bushings that re-position the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle this kit includes fixed length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eFOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisconnects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGain 30 percent more axle articulationl by disconnecting your front sway bar\u003c\/li\u003e\n\u003cli\u003eConvenient grease fittings ensure easy bushing lubrication for smooth, silent operation\u003c\/li\u003e\n\u003cli\u003eStainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces\u003c\/li\u003e\n\u003cli\u003eSpherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 4.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required. This kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2007-11 4Dr\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714588849,"sku":"1413FS","price":2218.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1413FS.jpg?v=1793278341"},{"product_id":"1404h-bds-suspension-3in-lift-kit-w-nx2-shocks-and-fixed-links","title":"BDS Suspension 3in Lift Kit w\/ NX2 Nitro Shocks \u0026 Fixed Links","description":"\u003cp\u003eUpgrade the ride and style of your Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance, this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes 3\" Pro-Ride coil springs capable of full coil bind and 2\" bump stop extensions to control compression travel while increasing wheel travel. Also included are brake line brackets, alignment cams to fine-tune front caster angles, and sway bar links.\u003c\/p\u003e\n\u003cp\u003eIn the rear, the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame-mounted track bar relocation bracket to correct axle shift. Round out this 3\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive-rate Pro-Ride coil springs is supplied to provide the correct lift height and a smooth, predictable ride across various terrains. Manufactured from high-tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameters. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved off-road flex\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions the rear axle under the vehicle\u003c\/li\u003e\n\u003cli\u003eLower cam locks to correct caster for alignment\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 35\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003cli\u003eThis kit is right-hand drive compatible. Follow right-hand drive installation instructions when installing this kit on a right-hand drive vehicle.\u003c\/li\u003e\n\u003cli\u003eIf using these rear sway bar links, the sway bar drop will not need to be installed. This also requires a wheel with 4.5\" backspacing or less for tire clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2012+ 4Dr Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714687153,"sku":"1404H","price":776.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/tweo3cewldzwnkynja8o.jpg?v=1793278341"},{"product_id":"1418fs-bds-suspension-4in-lift-kit-w-fox-2-0-shocks-and-fixed-links","title":"BDS Suspension 4in Lift Kit w\/ FOX 2.0 Performance Shocks \u0026 Fixed Links","description":"\u003cp\u003eTake your Jeep Wrangler JK 2 Door to the next level and improve the ride with this 4-inch lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, sway bar links, and front track bar relocation bracket and pitman arm to improve the steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed length lower control arms with OE grade rubber bushings that re-position the front axle for proper alignment.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle this kit includes fixed length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eNew control arms to properly control the front and rear axle positions\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eFOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 37\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models, the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 2012+ 2DR Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714752689,"sku":"1418FS","price":2202.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/BDS1418FS.jpg?v=1793278342"},{"product_id":"1412h-bds-suspension-3in-lift-kit-w-fixed-links-and-nx2-shocks","title":"BDS Suspension 3in Lift Kit w\/ NX2 Nitro Shocks \u0026 Fixed Links","description":"\u003cp\u003eUpgrade the ride and style of your Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes 3\" Pro-Ride coil springs capable of full coil bind and 2\" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.\u003c\/p\u003e\n\u003cp\u003eIn the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved offroad flex\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions rear axle under vehicle\u003c\/li\u003e\n\u003cli\u003eLower cam locks to correct caster for alignment\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 35\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFixed Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use on Rubicon models with electronic disconnect.\u003c\/li\u003e\n\u003cli\u003eImproves handling with proper sway bar operating angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction with zinc finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane hourglass bushings for long life and quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003cli\u003eThis kit is right hand drive compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e No Fine Print Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr 2007-11 Rubicon\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714785457,"sku":"1412H","price":718.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/omdxavbnuukhpojgyy6q.jpg?v=1793278342"},{"product_id":"1403fs-bds-suspension-3in-lift-kit-w-fox-2-0-shocks","title":"BDS Suspension 3in Lift Kit w\/ Fox 2.0 Performance Shocks \u0026 Disconnects","description":"\u003cp\u003eUpgrade the ride and style of your Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance, this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes 3\" Pro-Ride coil springs capable of full coil bind and 2\" bump stop extensions to control compression travel while increasing wheel travel. Also included are brake line brackets, alignment cams to fine-tune front caster angles, and sway bar links.\u003c\/p\u003e\n\u003cp\u003eIn the rear, the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame-mounted track bar relocation bracket to correct axle shift. Round out this 3\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Ride Coil Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive-rate Pro-Ride coil springs is supplied to provide the correct lift height and a smooth, predictable ride across various terrains. Manufactured from high-tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameters. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProRide coil springs offer improved ride quality and more articulation\u003c\/li\u003e\n\u003cli\u003eSway bar quicker disconnects and extended rear link for improved off-road flex\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket repositions the rear axle under the vehicle\u003c\/li\u003e\n\u003cli\u003eLower cam locks to correct caster for alignment\u003c\/li\u003e\n\u003cli\u003eChoice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping\u003c\/li\u003e\n\u003cli\u003eAllows clearance for 35\" tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Trimming may be required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 16 x 8 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisconnects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGain 30 percent more axle articulation by disconnecting your front sway bar\u003c\/li\u003e\n\u003cli\u003eConvenient grease fittings ensure easy bushing lubrication for smooth, silent operation\u003c\/li\u003e\n\u003cli\u003eStainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces\u003c\/li\u003e\n\u003cli\u003eSpherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003cli\u003eThis kit is right-hand drive compatible. Follow right-hand drive installation instructions when installing this kit on a right-hand drive vehicle.\u003c\/li\u003e\n\u003cli\u003eIf using these rear sway bar links, the sway bar drop will not need to be installed. This also requires a wheel with 4.5\" backspacing or less for tire clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit Package:\u003c\/strong\u003e Yes\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e See Individual Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e JK 4Dr 2012+\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":48115714982065,"sku":"1403FS","price":1481.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/9004\/0753\/files\/vjewrt4gez74gd1f1cbp.jpg?v=1793278343"}],"url":"https:\/\/wp4x4.com\/collections\/2007-2018-jeep-wrangler-jk-lift-kits.oembed","provider":"WP4x4","version":"1.0","type":"link"}